v2.10.0

Introducing the new DEMON BED_CHECKER heat soak system!
Know when your bed, gantry & probe thermally settle, measure & see the results! Fully customisable with Eddy NG support!

This feature will take all the guesswork out of heat soaking your printer, especially if your bed changes its shape a lot during warmup & you don’t know how long to set the heat soaking for.
Now the printer knows! Save time, save electricity by only heat soaking as long as you have to!! It’s adaptive, if it takes 5 minutes to settle that’s how long the heat soak will be. Likewise if it’ll 15 minutes it’ll adjust!
Not to mention that this heat soak is user interruptible while it’s running!

You ain't gonna want to miss this!

Features:

Enable on/off & also combine with smart heat soak & temperature wait heat soaks. Or force only BED_CHECKER mode!
Add an extra initial wait time before starting to allow bed time to start moving. Set own time.
Built in safety margin checker to make sure you don't probe off the edge of your bed. Set own margin size.
Define XY points to monitor during heat soak! Set location that shows the most movement on Mesh Heightmap!
Define interval wait time.
Set interval counter, define how many times the above interval can be repeated.
Define your choice of tolerance for readings during the heat soak.
define your choice of tolerance chain value, set to need multiple or no confirming probe attempts!
The BED_CHECKER heat soak is interruptible by the user during a live print via new macro button!
Reference Mesh building macro button to build a reference cold & hot mesh & save.
New .json file included to update macro buttons!

BED_CHECKER skip button
Reference mesh builder
Filament Change button