v2.10.2 NEW Load & Temperature Setting Systems!

Massive Upgrade!

Introducing a huge upgrade to DKEU’s LOAD/UNLOAD_FILAMENT systems & temperature handling, no more just a single default setting of 250ºc each time you load/unload, now you have an exclusive popup menu containing 3 quick system presets that you can choose from on Mainsail & Klipperscreen, there's also 2 user definable presets & an adaptive "Current" or "Restore" temperature preset that'll appear/change depending on situation!

You can still of course select your own temperature too with a "TEMP" parameter either in a sent command or by using the macro button params field!

It works both while you're preparing your printer for a job & when printing! 😁🤩😎👍

However if you only have a basic LCD screen there is now a LEGACY_LOAD mode that disables the new temperature control & selection system. Look for this in the Demon User Settings cfg file.

Reworking The Unload Process!

Not only do you get the above amazing feature included in this release but the whole unload process has also been reworked too! Tested on super stringy filament that now forms clean points when unloading! Used in all DKEU UNLOAD processes. In testing it was able to be fed directly back into the extruder without cutting the end!

New Feature AUTO_COOL!

There’s a new 2 stage auto cool feature that after user definable set time will reduce the hotend temperature to stop oozing & then turn it off without triggering idle timeout if the printer is left idle! It only runs if NOT printing & certain conditions are met. Mainsail button options to cool or not & to what temp.

Don't forget to support this project if you use it regularly & find it useful to your printing life!

https://patreon.com/3dprintdemon

Lastly thanks so much to all my active Patreon supporters who help make all this possible! Thank you guys! Enjoy!!