Add M-1 wall mounting guide

[bharvey88]

New page under M-1 (LED Matrix) → Additional Info → Wall Mounting your Panels, covering the 3D printed frames from the Printables model.

What's on it

• Which parts to print, with renders pulled from the model page, and a note that Side and Center are only for grids bigger than 2x2.
• M3 8mm screws with an Amazon link, plus a danger callout that 12mm is the hard maximum before a screw reaches the back of the panel.
• Content tabs for 1x1, 1x2, 1x3, 1x4, and 2x2. Each has a parts count, an SVG layout diagram, and the steps. The 2x2 repeats the rotate-the-bottom-row instruction because the Corner frames have to be oriented to match it.
• Wiring stays on Multiple Panels. This page just says to do it while the panels are flat on a table and links across with a button.
• Hanging: a thumb tack through the mounting hole at each corner, a photo of a two panel build with those holes circled, and a tape-and-level tip for getting it straight.

Print material guidance is PETG, PLA likely fine, per testing.

🤖 Generated with Claude Code

Summary by CodeRabbit

• New Features
  • Added a complete guide for wall-mounting M-1 panels, including frame selection, printing materials, hardware, assembly, wiring, and safety guidance.
  • Added visual assets supporting M-1 panel frame and mounting instructions.
• Documentation
  • Added the wall-mounting guide to the Home Assistant documentation navigation under Additional Info.

[coderabbitai]

Caution

Review failed

The pull request is closed.

ℹ️ Recent review info

⚙️ Run configuration

Configuration used: Organization UI

Review profile: CHILL

Plan: Pro Plus

Run ID: 58eced49-2cef-4d48-96b1-ba6b29dd19a9

📥 Commits

Reviewing files that changed from the base of the PR and between 90e8642 and 2c74f20.

⛔ Files ignored due to path filters (5)

• docs/assets/m-1-frame-layout-1x1.svg is excluded by !**/*.svg
• docs/assets/m-1-frame-layout-1x2.svg is excluded by !**/*.svg
• docs/assets/m-1-frame-layout-1x3.svg is excluded by !**/*.svg
• docs/assets/m-1-frame-layout-1x4.svg is excluded by !**/*.svg
• docs/assets/m-1-frame-layout-2x2.svg is excluded by !**/*.svg

📒 Files selected for processing (11)

• docs/assets/m-1-frame-center.webp
• docs/assets/m-1-frame-corner.webp
• docs/assets/m-1-frame-end-1xn.webp
• docs/assets/m-1-frame-joiner-center.webp
• docs/assets/m-1-frame-joiner-side.webp
• docs/assets/m-1-frame-middle-1xn.webp
• docs/assets/m-1-frame-mounting-holes.webp
• docs/assets/m-1-frame-side.webp
• docs/assets/m-1-frame-single.webp
• docs/products/m1/setup/m1-wall-mounting.md
• mkdocs.yml

---

Walkthrough

The PR adds an M-1 wall-mounting guide, nine supporting WebP assets, and a navigation entry in mkdocs.yml. The guide covers frame selection, printing, assembly, wiring, and wall installation.

Changes

M-1 wall mounting

Layer / File(s)	Summary
Wall-mounting guide and visual assets docs/products/m1/setup/m1-wall-mounting.md, docs/assets/m-1-frame-*.webp	Adds instructions for frame selection, printing materials, screw limits, panel layouts, wiring, and wall mounting. Adds the related WebP diagrams and installation image.
Documentation navigation mkdocs.yml	Adds “Wall Mounting your Panels” under M-1 Additional Info.

Estimated code review effort: 2 (Simple) | ~10 minutes

Poem

I’m a rabbit with a panel to align,
Frame by frame, the edges shine.
M3 screws stop at twelve,
Joiners keep the rows in place.
With tape and hooks, the wall looks bright,
M-1 panels hang just right.

✨ Finishing Touches

🧪 Generate unit tests (beta)

• Create PR with unit tests
• Commit unit tests in branch docs-m1-frame-assembly

---

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

• X
• Mastodon
• Reddit
• LinkedIn

_{Comment @coderabbitai help to get the list of available commands.}