Home
This site provides content for how to create new FMC Card reference designs or access to completed reference designs for the AXE5300 platform. The AXE5300 features an Intel® Agilex® 5 E-Series SoC FPGA.
Developers of new FMC Card reference designs are provided with step by step instruction for both hardware and software build flows.
Completed reference designs are provided with a Quick Start guide, Platform Architectural descriptions, and instructions on how to rebuild the design. Complete bootable SD card images are also provided for each reference design. The table below, show a list of the completed designs.
- Introduction
- Prerequisites for Developers *** Do this first if intentions are to build any of the designs ***
- Developer Starter Guides
- Additional Developer Documentation
- Terms of Use
The AXE5300 is an SoC board, based on Intel® Agilex® 5 E-Series SoC FPGA, an ethernet PHY, 1 GB LPDDR4 SDRAM per HPS and FPGA fabric, and one 1Gb Quad SPI Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages.
- Intel® Agilex® 5 E-Series SoC FPGA (A5ED043BB32AE5S)
- Package: BBGA 1596-pin 32mm x 32mm (B32A)
- Speed Grade: 5
- Temperature: Extended (Tj = 0 °C to 100 °C)
- 1 GB LPDDR4 SDRAM for HPS
- 1 GB LPDDR4 SDRAM for FPGA Fabric
- 1 Gb QSPI for configuration via the SDM
- EEPROM
- Temperature Sensor
- LED's & Buttons
- FMC+ Connector
- 2x CRUVI HS Connector
- 2x CRUVI LS Connector
- JTAG
- UART via micro USB B Connector (for FPGA)
- UART via micro USB B Connector (for HPS)
- 4 x USB 2.0 Host
- 2x 1Gb Ethernet via RJ45 Connector
- SD Card
- HDMI output
- 2x 10Gb SFP+ cages
- 12 V Input supply voltage
These starter guides help developers through the process of creating their own reference designs for the AXE5300 and act as a starting point for future customization.
YOU TAKE ALL SUCH PRODUCTS AND SERVICES “AS-IS” WITHOUT ANY WARRANTY. THERE ARE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND BY SELLER, EXPRESS OR IMPLIED, AS TO THE CONDITION OR PERFORMANCE OF ANY PRODUCTS OR SERVICES, THEIR MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, NON-INFRINGEMENT, OR OTHERWISE. SELLER ASSUMES NO RESPONSIBILITY OR LIABILITY FOR SUPPLIERS’ PRODUCT OR SERVICE SPECIFICATIONS OR THE PERFORMANCE OR ADEQUACY OF ANY DESIGN OR SPECIFICATION PROVIDED TO SELLER.
All rights in intellectual property owned or licensed by Seller or Supplier are hereby reserved and deemed restricted or limited. Seller makes no representation or warranty with respect to such rights and will have no liability in connection with them. You agree to comply with all requirements with regard to any intellectual property (including any requirement to enter into a separate license agreement and prohibitions against duplicating, reverse engineering, or disclosing the same). You shall indemnify Seller against and defend and hold it harmless from all liability, cost, or expense arising out of or relating to any (a) breach or alleged breach of these terms and conditions, (b) allegation or claim, including infringement claims, that arise from Your use of Products or services in combination with other products or services, or (c) alleged or actual infringement of any intellectual property rights provided by You to Seller.