BaerChain Super node Guide

Back to home page directory

Return to parent directory

BaerChain Super node Guide

BaerChain test network networking process

According to the recommended server configuration, server setup and networking preparation.

Step1: Prepare the server hardware according to the content of the "accounting server hardware configuration requirements" in this article;

The accounting server needs to meet the following requirements:

• CPU：64 Core
• Disk：1024GB SSD
• RAM：1024GB
• bandwidth：10 Gigabit

Step2: Compile according to the "BaerChain Compilation Guide";

Step 3: Compile the completed node binary program, refer to the content of "BaerChain Network Connection" to configure and run. After the feedback is normal, prepare the information including the server IP address, node ID, and outbound address for the networking needs.

Step4: After completing the preparatory work of step1-step3, submit the information required for networking to the dedicated discussion section of the BaerChain node committee on Gitter. If there are any questions, and seek technical support, it is also proposed in this section;

Step 5: After all the information required for networking the nodes is collected, BaerPioneer will take the lead in networking and release the test network configuration file. After all nodes download the configuration file to the node server, the networking is successful.