Skip to content

v1.2

Choose a tag to compare

View all tags
@hirnlego hirnlego released this 02 Jul 07:35
v1.2
5f05dd4
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

NOTE: This release requires updating both the firmware and the patch, two files!

This is a minor version with just a few fixes, but unfortunately it requires some steps. Please, follow them all and in order!

1) Remove the old configuration:

  1. Turn on the unit
  2. Connect the unit to your computer via USB
  3. Visit https://rebeltech.org/patch-library/device, enabling MIDI if the page asks you so
  4. In the gray block, click the button "Connect to Device"
  5. When the unit is connected, open the "Resources" tab
  6. Delete oneiroi.cfg, if present

2) Update the firmware:

  1. Download the file Oniroi_firmware-v1.2.syx from the assets section down below
  2. Visit HERE, enabling MIDI if the page asks you to
  3. Follow the instructions under the section "Flash Firmware"

3) Update the patch:

Just follow the instructions here, but using the attached file Oneiroi_patch-v1.2.syx found down below.

4) Calibration:

The calibration procedure is described here.

Changelog:

v1.2

  • Fixed 0v-1v V/Oct CV range (needs hw fix) (#37)
  • Fixed supersaw pitch (it was an octave lower) (#32)
  • Removed V/Oct CV attenuation feature
  • Easyer calibration (not using calibration data for knobs and faders anymore)

v1.1

  • Fixed modulation and CV mappings when using attenuverters (#2)
  • Fixed looper's backwards playback (#3)
  • New crossfade for looper's loop point (#4)
  • Fixed sine osc frequency boundaries (#6)
  • Raised looper's crossfading time / Fixed crossfading when going backwards (#11)
  • Fixed wavetable pitch jittery
  • Smoothed wavetable offset
  • Improved wavetable sound by passing it through a fixed low shelf filter
  • Fixed sine waves unison (#12)
  • Fixed wavetable offset CV (#16)
  • Removed a bit of lag from oscillators pitch control and V/OCT input
  • Tweaked the oscillators' levels (#17)
  • Swapped biquad filters for SVF in DjFilter to save some CPU, especially when looper is recording
  • Added fade in/out when starting/stopping recording to avoid clicks
  • Smoothed echo's density (#9)
  • Raised looper's start parameter resolution
  • Added DC blocking filters at the beginning and at the end of the audio chain to reduce low end rumble
  • A bit of gain to DjFilter's extremes
  • Better fade when looper is triggered
  • Fixed clicking of echo's density when synced
  • Added compressors to echo and ambience
  • Displaying patch version with LEDs
  • Fixed ambience's reverse spacetime

v1.0

  • First release version.
Assets 4
Loading
7 Join discussion