New Ribbon sensor
I've revised the hardware now, and it should stick for the foreseeable future
Switched from a random AliExpress 2040 to Pimoroni's Tiny 2040 for a more official platform
There is now an FSR underneath the main ribbon, this now acts as the AT sender instead of the left pressure pad
I will now also provide a pre-compiled binary in each release
Other changes listed below
- Switched from a Generic Small 2040 to a Tiny 2040 by Pimoroni
- This involves switching from a DLED to a 3-Pin RGB LED
- This also means that the FastLED library is no longer required and will also no longer be used
- Added a 3rd pressure sensor, this is underneath the position ribbon, so if I press harder on the position ribbon a higher AT message will be sent
- Changed the left pressure pad from an AT sender to a CC sender, by default now the left pad send CC 1 (The Mod wheel) and the right pad sends CC 2
- These can now be changed in the AR2M menu
- Improved the way Poly play works by adding the option to change to different major and minor chords as well as the ability to choose how many will be played at once (up to 3 or 4, depending on the chord)
- Moved Poly settings from the AR2M menu to the idle screen
- If there is no activity the OLED will now turn blank to reduce the burn in experienced by the OLED panel, the LED will fade blue to show this
- Chromatic play will NOT be deprecated since I've rewritten a lot of code where this had to be delt with anyway
- On Live info MIDI CC bars are now at the top left and top right, whilst the AT indicator has moved to be included with the positional indicator
- The top bar indicates the build up to activate the controller the bottom bar indicates the amount of AT sent
- Removed a lot of unused and OLD code