Describe the Bug
Wether it's a mechanical or windmill bearing, facing upwards it seems to "stall" (words by Grimmauld in the discord) when I move away for a long time, possibly out of render / simulation distance, tried uninstalling optifine but no luck, contraptions still stalled, only started happening after I installed .5 however...
The contraptions still give stress readings with the goggles and things can still be attached to the bottom, which will still spin and act normally, but I'll always have to right click the bearing twice to get it to start again
The contraption will stay in the contraption state until the bearing is right clicked again, then it'll place all the blocks and you'll have to reclick it to turn it back into a contraption
Another detail I should mention (2 weeks after i originally posted this) is that it dosent matter what's attached to the bearing or where it's being powered from, i have a tree farm that spins from a clutch and a windmill across the river and there are still cases when I fly back and they're stopped.
And another interesting detail is if the stalled bearings and their contraptions are out of render distance, they'll still render, but it's not an optifine issue, i've tested many times with and without it
Reproduction Steps
- Have a bearing of any kind facing sticky side up
- Have it spin for a while (like on a crop farm with portable storage interface, as that's what i have)
- Run away and do other things for a while (out of render / simulation distance I think )
- Run back and be forced to replant your carrots / potatoes
...
Expected Result
After leaving the bearing running for a while and going away from it, it'll stop at some point, completely at random. Windmill bearing, mechanical bearing, whatever, anything that spins it seems.
Screenshots and Videos
Crash Report or Log
No response
Operating System
Windows 10
Mod Version
0.5.0d & Fabric version 0.5.0c
Minecraft Version
1.18.2
Forge Version
40.1.70
Other Mods
Plus the armour statues, fast leaf decay and more mob heads data packs from vanilla tweaks
Additional Context
I have about 5 farms here, all of which at some point stopped, sometimes only one stops, sometimes two, sometimes this one, sometimes that one, every time i come home from somewhere its a gamble to see which farm I'll have to replant lol
The reason I keep mentioning "vertical" bearings is because I dont have the issue with horizontal ones, this windmill has stayed powered my whole playthrough, as well as my decorative water wheel near my house, which uses a normal water wheel and a sideways mechanical bearing
Id like to add also, that this happens on the fabric version as well, as after I updated to .5 on my boyfriend and I's server, the bearings started stalling there too, really hope i get a response or even a potential solution soon :)
Describe the Bug
Wether it's a mechanical or windmill bearing, facing upwards it seems to "stall" (words by Grimmauld in the discord) when I move away for a long time, possibly out of render / simulation distance, tried uninstalling optifine but no luck, contraptions still stalled, only started happening after I installed .5 however...
The contraptions still give stress readings with the goggles and things can still be attached to the bottom, which will still spin and act normally, but I'll always have to right click the bearing twice to get it to start again
The contraption will stay in the contraption state until the bearing is right clicked again, then it'll place all the blocks and you'll have to reclick it to turn it back into a contraption
Another detail I should mention (2 weeks after i originally posted this) is that it dosent matter what's attached to the bearing or where it's being powered from, i have a tree farm that spins from a clutch and a windmill across the river and there are still cases when I fly back and they're stopped.
And another interesting detail is if the stalled bearings and their contraptions are out of render distance, they'll still render, but it's not an optifine issue, i've tested many times with and without it
Reproduction Steps
...
Expected Result
After leaving the bearing running for a while and going away from it, it'll stop at some point, completely at random. Windmill bearing, mechanical bearing, whatever, anything that spins it seems.
Screenshots and Videos
Crash Report or Log
No response
Operating System
Windows 10
Mod Version
0.5.0d & Fabric version 0.5.0c
Minecraft Version
1.18.2
Forge Version
40.1.70
Other Mods
Plus the armour statues, fast leaf decay and more mob heads data packs from vanilla tweaks
Additional Context
I have about 5 farms here, all of which at some point stopped, sometimes only one stops, sometimes two, sometimes this one, sometimes that one, every time i come home from somewhere its a gamble to see which farm I'll have to replant lol
The reason I keep mentioning "vertical" bearings is because I dont have the issue with horizontal ones, this windmill has stayed powered my whole playthrough, as well as my decorative water wheel near my house, which uses a normal water wheel and a sideways mechanical bearing
Id like to add also, that this happens on the fabric version as well, as after I updated to .5 on my boyfriend and I's server, the bearings started stalling there too, really hope i get a response or even a potential solution soon :)