Skip to content

Dimensions

Ely HADDAD edited this page Nov 14, 2026 · 3 revisions

Dimensions

Everything is in the Annotations panel: overall size, centre lines, holes and chamfers found on the model; chain dimensions for rows of parts; a ruler or grid for positions; and your own manual and angle dimensions.

ISO or ASME (Views ‣ Standard)

ISO 129-1 ASME Y14.5
Dimension text Above the line; vertical text reads from the right Horizontal, in a break of the line
Arrowheads Closed, 30° Closed, 3:1
Extension lines Start at the part Small gap from the part

The same views dimensioned with ISO 129-1 (left) and ASME Y14.5 (right)

Dimensions sit 10 mm from the view, with 3.5 mm text (2.5 mm on A4 and Letter) and 3 mm arrowheads. Figures have a white background so lines never cross them.

Small dimensions: when the value does not fit between the extension lines, it moves just past them; when the arrows do not fit, they go outside, pointing in.

Overall size

  • Every View: width and height on every view. Off (default), each dimension is drawn once: width and height on the front view, depth on the side view.
  • Without Handles (on by default): the body is dimensioned at its edges, then the full size in brackets, e.g. 45.0 then (47.2). Handles are found by their name (handle, knob, poignée, bouton, Griff…) or put them in a collection chosen in Leave Out.

Centre lines, holes and chamfers

  • Axes: thin chain lines (ISO 128-2) on holes and shafts: a cross on each circle, an axis along a cylinder seen from the side. Holes and shafts are found from the circular edges of the mesh.
  • Holes: on the view where most holes are seen as circles, 4 × Ø8 per diameter on a leader, and their spacing as chain dimensions from the left edge (under the view) and from the bottom (on the right). Values are taken from the model.
  • Chamfers: 45° chamfers (a 45° face between two perpendicular faces) dimensioned 2 × 45° on a leader (ISO 129-1), each size once, on the first view where it is seen edge-on.
  • With the free Talos add-on, its holes are dimensioned in full: 4 × Ø6.6 ⌴ Ø11 ↧ 6.4, Ø5.5 ⌵ Ø11.6 × 90°, M5 ↧ 8; threads are drawn to ISO 6410-1.

Manual dimensions

In Edit Mode, select the vertices, then in Annotations ‣ Manual Dimensions:

  • From 2 Vertices: a dimension between two vertices, drawn at true length on every view parallel to it, outside the view.
  • Angle from 3 Vertices: select the vertex of the angle first, then a point on each edge; an arc centred on the vertex with the value in degrees (ISO 129-1), on the views parallel to the angle.
  • Symbol before the value: Ø, R, SØ, SR, □ or t= (ISO 129-1).
  • The arrows of the list set the order of the dimensions, which is the order of their rows under the view.

Chain dimensions

For rows of objects (shelves, posts, seats). Chains that do not overlap share the same row under the view. Add a chain and set:

  • Collection: the objects of the row;
  • View: Top, Front or Side;
  • Reference: the point of each object used as a station; it is named after the side of the model (Front (−Y), Back (+Y), Left (−X)…);
  • Combine Equal Spacing: equal intervals written once as 5 × 600 = 3000; off, every interval is dimensioned;
  • Tolerance: intervals that differ by less than this percentage are merged (model imprecision);
  • Positions: each station's coordinate from the world origin, under the chain;
  • Architect Ticks (Style): oblique ticks instead of arrows. Ticks are also used where arrows do not fit.

The chain under the front view above reads 5 × 600.0 = 3,000.0: five equal intervals of 600 mm.

Ruler or grid

Ruler adds coordinate scales along the views; Grid adds an architect grid (A, B, C / 1, 2, 3). Set the Step (0 = automatic, about 10 intervals), the Origin object (world origin if empty) and the views (Top, Front, Side).

Ruler Grid
Coordinate ruler along the top view Architect grid with lettered rows and numbered columns on the front view

Clone this wiki locally