Skip to content

Bluetooth Setup & Pairing

Jump to bottom
Engage Cosplay edited this page Apr 20, 2026 · 7 revisions

Bluetooth Setup & Pairing

This guide explains how to connect your Engage Pro Elite to a Bluetooth speaker.

🔵 Bluetooth Mode Overview

Bluetooth is the default audio mode.

When powered on:

  • The device will attempt to reconnect to the last paired speaker
  • If successful, boot audio will play automatically after 5-10 seconds of connecting to speaker.
  • Blue LED will illuminate to reflect Bluetooth is connected.

⚠️ On first use, you will need to pair a speaker.

🔗 Pairing a New Bluetooth Speaker

You can enter pairing mode one of two ways:

  1. Put your speaker into pairing mode
  2. Power on the device 3a. Either press and hold Button 1 on the main unit or 3b. Hold Button 1 + Button 2, While holding, press Button 5 on the palm unit
  3. Release all buttons

The device will:

  • Clear any previous pairing data
  • Enter pairing mode
  • Begin scanning for nearby speakers
  • Onboard Blue LED will begin flashing (this can be observed through the pin hole ontop of the case) to show device is in pairing mode.

📶 Connecting Your Speaker

  1. Ensuring your Bluetooth speaker into pairing mode
  2. Wait for the Engage Pro Elite to find and connect
  3. Is speaker supports it there will be an audio queue to confirm devices are connected.
  4. Engage Pro Elite Blue LED will move from flashing to static.
  5. After a few seconds your default character boot sound will be played.
  6. Your Engage Pro Elite is now ready for use.

✅ Once connected:

  • The device will remember this speaker for future use
  • On next boot, it will attempt to reconnect automatically

⏱ Connection Timing

  • Initial connection may take a few seconds
  • Audio playback will begin once the connection is fully established

⚠️ You may notice a short delay before the first sound plays — this is normal

🔄 Reconnecting

On future power-ups:

  • The device will automatically reconnect to the last paired speaker (ensure your speaker is already powered on)
  • No button input is required

If it does not reconnect:

  • Ensure the speaker is powered on
  • Ensure the speaker is not connected to another device
  • Restart both devices if needed

❌ Common Issues

Not Connecting

  • Speaker not in pairing mode
  • Speaker already connected to another device
  • Out of range

Audio Delay on Startup

  • Normal behaviour while Bluetooth connection initializes

No Audio After Connecting

  • Check speaker volume
  • Confirm correct mode (Bluetooth vs wired)
  • Try restarting the device

🔁 Reset Pairing

If you need to connect to a different speaker:

Repeat the pairing steps:

  1. Hold Button 1 + Button 2
  2. Press Button 5

This will:

  • Clear stored device
  • Allow pairing with a new speaker

🛠 Still Not Working?

Test using an audio cable or wired headphones to confirm the device is working as expected.

👉 See: Troubleshooting Guide

🐞 Found a Bug?

👉 See: How to Report an Issue

Clone this wiki locally