Skip to content

Creating Your Own Sound Packs

Jump to bottom
Engage Cosplay edited this page Jul 16, 2026 · 2 revisions

Creating Your Own Sound Packs

This guide explains how to prepare your own audio files for use with the Engage Pro Elite.

⚠️ This guide covers the standard button naming convention for Click and Hold actions only. Q&A file naming is documented separately.

📁 File Naming Convention

Each button on the Engage Pro Elite supports two primary actions:

  • Click
  • Short Hold

Each action is identified by a specific file name.

Click Actions

Button File Name
Button 1 t1clk.wav
Button 2 t2clk.wav
Button 3 t3clk.wav
Button 4 t4clk.wav
Button 5 t5clk.wav
Button 6 t6clk.wav
Button 7 t7clk.wav
Button 8 t8clk.wav

Short Hold Actions

Button File Name
Button 1 t1hld.wav
Button 2 t2hld.wav
Button 3 t3hld.wav
Button 4 t4hld.wav
Button 5 t5hld.wav
Button 6 t6hld.wav
Button 7 t7hld.wav
Button 8 t8hld.wav

Multiple Sounds Per Button

A button can contain multiple sounds for either Click or Hold actions.

Simply increment the number at the end of the filename.

Examples

Click:

t1clk1.wav
t1clk2.wav
t1clk3.wav

Hold:

t4hld1.wav
t4hld2.wav
t4hld3.wav

When multiple files are present, the Engage Pro Elite will cycle through them in sequence.

🎵 Audio Format Requirements

All audio files must use the following format:

Setting Value
File Type WAV
Bit Depth 16-bit
Channels Mono
Sample Rate 44,100 Hz

Using any other format may result in:

  • Audio playing too quickly
  • Audio playing too slowly
  • Distorted playback
  • Incorrect volume levels
  • Files not playing at all

📦 Installing Your Sound Pack

Once your audio files have been prepared, they can be installed onto your Engage Pro Elite.

👉 See:

Installing & Removing Sound Packs

This guide explains:

  • Folder structure
  • Character profiles
  • Installing new sound packs
  • Removing existing sound packs

⚠️ Audio Troubleshooting

If you experience audio issues such as:

  • Sounds playing too fast
  • Sounds playing too slow
  • Audio that is too quiet
  • Audio that is too loud
  • Distorted playback

Please verify your audio files are using the correct format before assuming there is a problem with the Engage Pro Elite.

The vast majority of playback issues are caused by incorrectly formatted audio files rather than a fault with the device.

🛠 Need Help?

👉 Installing & Removing Sound Packs

👉 Troubleshooting Guide

👉 How to Report an Issue

Clone this wiki locally