Add Support for GUITION JC1060P470

[ahb-bs]

Would it be possible to get support for the ESP32-P4 + 1024600 MIPI Display which uses the JD9165 display driver and the GT911 touchscreen - but it's been reported that this is only 800500.

Device Name
JC1060P470

URL of Device Specifications document

Board
http://pan.jczn1688.com/directlink/1/HMI%20display/JC1060P470C_I_W.zip

Display driver
https://github.com/espressif/esp-iot-solution/tree/master/components/display/lcd/esp_lcd_jd9165

Touch
https://github.com/espressif/esp-iot-solution/tree/master/examples/usb/device/usb_extend_screen/components/espressif__esp_lcd_touch_gt911

https://www.aliexpress.com/item/1005008328088576.html

[fvanroie]

There is currently no support for ESP32P4 devices, and I have no plans to add this any time soon.
I estimate the effort will be substantial to implement support for this new MCU.
Are you able to contribute with development?

[ahb-bs]

Firstly, the work you've done on this project is giving me a whole new avenue for making the home automation integrated into the house, so thank you! I looked to see if there was a Buy Me a Coffee link or something so I can show you my appreciation!

Secondly, I'm looking into (but don't have the skills to) make the changes as follows:
Revised Architecture
Component | Role
ESP32-P4 | Handles UI, Rendering, and Touch Input (LVGL)
ESP32-S3 | Handles Wi-Fi, MQTT, Home Assistant, and Cloud Communication

What This Means:
ESP32-P4 runs openHASP and directly, renders everything on the display and manages touch actions
ESP32-S3 acts as a network controller and forwards Home Assistant events to the ESP32-P4.

I'm not sure who to split the code but I'm looking at it. It's a whole new world....

[fvanroie]

Check out the donation links.

Unfortunately I don't have to time to investigate these new hardware changes, but I believe the P4 can use the C6 Wifi transparently with the correct networking stack/driver.

[ahb-bs]

I just looked on the Github site! Thank you!

It can, I'm looking to see what I can do with getting basic comms in place and build from there.

[fvanroie]

Closed due to inactivity, please reopen if anyone is serious about working on this device configuration.

[LasseEmilBuch]

what do you expect would need to be done in order to get the P4 chips working?

im specifically talking about the CrowPanel Advanced 7inch ESP32-P4

[EduardoPosada]

Hola,
Tengo algo parecido a lo que tu quieres.
Esp32p4 lcd MPI 1024x600.
Me funciona todo muy bien, lvgl, wifi, mqtt.
Desarrollado en platformio.
Para BT hay que desarrollar en esp-idf.
Si quieres podemos colaborar. Puedo compartir mi proyecto.
Saludos,Eduardo.
eduardo.posada@gmail.com

[tyeth]

I might also be able to help a bit here, as time permits. Not immediately though.
I have the Guition P4 board, and a bit of esp experience [although only a small bit with P4]. I don't have an ethernet P4 board, although could grab one (and have possibly compatible external ethernet breakouts), and presumably most would be using a WiFi coprocessor [C6/C3/C5 etc] where it's almost seamlessly treated as part of the main stack running on the P4.

Be likely to take a look over the holidays

[markusressel]

It seems like there has been a lot of development over at ESPHome for these devices:

https://community.home-assistant.io/t/jc8012p4a1-guition-esp32-p4-esp32-c6/939971

Maybe that can help here too?

[tyeth]

Try https://community.home-assistant.io/t/guition-esp32-p4-jc1060p470/959144/21

…

On Sun, 15 Feb 2026, 19:23 Markus Ressel, ***@***.***> wrote: *markusressel* left a comment (HASwitchPlate/openHASP#873) <#873 (comment)> It seems like there has been a lot of development over at ESPHome for these devices: https://community.home-assistant.io/t/jc8012p4a1-guition-esp32-p4-esp32-c6/939971 Maybe that can help here too? — Reply to this email directly, view it on GitHub <#873 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABTBZ46Y23HNQG2HC2XHNHD4MDBTDAVCNFSM6AAAAABX57XXR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTSMBVGA2DCMRYHE> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>