Repository navigation
Journalctl Filters
JanHG98 edited this page Sep 26, 2026
·
1 revision
sudo journalctl -u tetra.service -fsudo journalctl -u tetra.service -b --no-pagersudo journalctl -u tetra.service -f | \
grep --line-buffered -iE 'register|location|roaming|attract|affiliate'sudo journalctl -u tetra.service -f | \
grep --line-buffered -iE 'call|setup|connect|release|floor|carrier|timeslot|TCH'sudo journalctl -u tetra.service -f | \
grep --line-buffered -iE 'SDS|U-STATUS|status|HMD|home.mode|emergency'sudo journalctl -u tetra.service -f | \
grep --line-buffered -iE 'AudioPlayer|record|recording|TTS|Piper|ffmpeg|archive|NFS'sudo journalctl -u tetra.service -f | \
grep --line-buffered -iE 'Soapy|SDR|sample|buffer|underflow|overflow|timing|passband|PHY'sudo journalctl -u tetra.service -f | \
grep --line-buffered -iE 'directory|control.room|websocket|connect|auth|TLS|broken.pipe'sudo journalctl -u tetra.service \
--since '2026-07-21 12:00:00' \
--until '2026-07-21 12:15:00' \
-o short-iso --no-pager > tetra-zeitfenster.logVor Weitergabe Zugangsdaten, Nachrichtentexte, ISSIs und Standorte prüfen und bei Bedarf schwärzen.
NetCore Tetra Systemwiki · Quellenstand main@8fb581b7, Abgleich 16.10.2026 · Release v1.9.0
Start · Projektstand · Roadmap und Releases · Sechs Upstreams · Deployment · Logs und NAS · Gesamte aktuelle Dokumentation
Datierte Altstände bleiben Historie. Konfiguration, installierter Build und tatsächliche Fach-/Funkprüfung bleiben für die konkrete Anlage gesondert zu prüfen.
NetCore Tetra
System
Aufbau
- Hardware und HF
- Installation
- Konfiguration
- Open-Lab-Deployment
- Deployment und Discovery (auf main)
- Provisioning
- Abnahme
Funk und Daten
- ISSI und GSSI
- Registrierung
- Rufe
- Dual Carrier
- SDS und U-STATUS
- Home Mode Display
- LIP und GPS
- Paketdaten und WAP
- Mehrzellenbetrieb
Bedienung und Integration
- Warnzentrale
- Dashboard
- Control Room
- Directory
- Directory API
- Geräte
- Basisstationen
- Gruppen
- Statusmeldungen
- Gerätegruppen
- Audio-Zentrale
- Integrationen
- SIP und Brew
- MQTT und Home Assistant
Betrieb und Hilfe