Skip to content

Powders alloys and ceramic

LatroX-dev edited this page Nov 21, 2026 · 1 revision

Mix a powder, make a material

The powered Material Preparator grinds and mixes physical ingredients. The Sinter Furnace presses, heats and cools that powder into a usable material. Both need external FE. Neither needs a Matter Cell or material-network stock for these recipes.

1. Grind the base metals

Put one iron, copper or gold ingot in the Preparator's left input and leave the other inputs empty. It makes one matching Iron Dust, Copper Dust or Gold Dust. Each base-speed batch takes 4,000 FE and 20 seconds.

2. Use all three ingredient slots

The three slots under Ingredients run left to right. Put the primary material first, the second material in the middle and the refining fraction on the right. The result appears in the separate output slot.

Left input Middle input Right input Complete output
3 Iron Dust 1 Copper Dust 1 Rhedon 4 Rhevon Powder
3 Copper Dust 1 Gold Dust 1 Lumin 4 Lumivex Powder
1 Silith 1 Argil 1 Virel 4 Virelite Powder

Hover the slot markers or recipe-viewer icons for ingredient counts and process details. These mixtures need the powered Material Preparator or a complete Preparation Reactor. At base speed each mixture takes 8,000 FE and 32 seconds. The small refining fraction is part of the finished composite. There is no separate alloy-blend item.

3. Press, heat and cool

Recipe for Sinter Furnace.

Put one powder in the Sinter Furnace's single input. Leave room for one complete output. The machine shows the real input on its internal tray while the press and heating cycle run.

Input Output Purpose Base cost
Rhevon Powder Rhevon Ingot Rigid alloy for Cutters, Filters and Basins 12,000 FE, 40 seconds
Lumivex Powder Lumivex Ingot Signal alloy for Optical Circuits 12,000 FE, 40 seconds
Virelite Powder Virelite Ceramic Technical ceramic for insulated reaction machinery 12,000 FE, 40 seconds
Diamond Matrix Blend Diamond Lattice Optical Circuits, upgrades and advanced machines 12,000 FE, 40 seconds
Ender Conductor Blend Ender Conductor Larger Cells, Terminals, Interfaces and Ports 16,000 FE, 48 seconds
Netherite Sheath Blend Netherite Sheath 1M Cell, Chemical Reactor and Resonant Cable 24,000 FE, 56 seconds

The last three blends are mixed in the Material Preparator. See Crystals and advanced components. Sintering takes inspiration from powder metallurgy and ceramic firing, where compacted grains bond under heat. ReMatter's field and signal properties are fictional. No added water or fluid connection is required.

An ordinary furnace or blast furnace can also turn Rhevon and Lumivex Powder into their ingots. Virelite uses the Sinter Furnace, or its optional Oritech route.

Regrind the same alloy

One Rhevon or Lumivex Ingot can be ground back into one powder of that same alloy in the powered Preparator. It does not separate into the original ingredients or multiply the metal.

Mix → alloy powder → ingot → the same alloy powder. There is one powder per alloy, shared by preparation, heating and recycling. Virelite Ceramic has no equivalent regrinding recipe.

Connect other machines

When installed, Mekanism's Crusher and Oritech's Pulverizer can regrind either alloy ingot. Oritech's Foundry accepts two matching powders and produces two matching ingots or ceramic pieces. Check EMI or JEI for the available machine recipes and their costs.

Hoppers and item pipes can supply ingredients and remove results when Automation is on. For AE2 or Refined Storage, connect a ReMatter Network Interface and enable Network jobs on the workers. The automatic recipe list uses the manufacturing route. Reverse alloy-grinding recipes remain available for manually encoded processing patterns. See Drive and automation.

Clone this wiki locally