Skip to content

Water and gases

LatroX-dev edited this page Nov 21, 2026 · 1 revision

Water and gases

Add a Matter Drive with a Cell and connect the Chemical Processor to it. Keep the Cell in the Drive. Processors use its shared stock. Supply FE separately to each processing machine. Liquids and gases remain distinct stored quantities, without chemical inventory items.

1. Store water

Use a water bucket on the Decomposer. For a pipe, open Settings and enable Automation. Leave its item input empty to process the tank.

Each default operation converts 1,000 mB of water into 1,000 stored water units, using FE. Press Start on the Decomposer if it is paused. It then processes supplied water continuously. The bucket itself is not decomposed.

2. Split water

In a powered Chemical Processor, press Choose recipe (or the current recipe name to change the selection) and find Water electrolysis. Check the requirements, confirm with Use recipe, then press Make 1 for one batch.

1,000 water units → 1,000 hydrogen units + 500 oxygen units

The gases enter the same Cell. Their quantity ratio is 2 hydrogen to 1 oxygen. These units describe chemical quantities, not equal masses.

Recipe for Chemical Processor.

3. Recombine the gases

In a powered Chemical Processor, open Choose recipe or the current recipe name, choose Water synthesis, confirm with Use recipe, then press Make 1. It consumes 1,000 hydrogen units and 500 oxygen units to restore 1,000 water units.

4. Export water

In the Material Synthesizer, open Choose recipe or the current recipe name and select Water. Confirm with Use recipe and press Make 1. One default batch consumes 1,000 stored water units and FE, then produces 1,000 mB in its tank.

Use an empty bucket to collect the water. A fluid pipe needs Automation enabled in Settings. The tank holds 16,000 mB of one fluid at a time.

Use Make 1 at each synthesis or reaction stage. Loop toggles continuous production. Each stage consumes FE. The complete loop does not generate free power.

Other fluids

Water and lava are available in the base catalogue. Optional mod integrations add explicitly supported fluids. Check the product list and recipe preview for the exact substance quantities and batch volume. A fluid name alone never grants a conversion.

Chemical pipes with Mekanism

Enable Automation in the Drive’s Settings, then connect a compatible Mekanism Pressurized Tube. Supported chemicals transfer in both directions through explicit mappings.

Hydrogen, oxygen and water vapor use one stored unit per chemical unit. Water vapor is the gas phase of water. Other mapped chemicals can have different ratios. They are not interchangeable by name or formula. Ordinary fluid pipes do not transport the stored gas quantities.

A chemical leaves the Drive only when the server permits its export. The twelve mapped chemicals, including lithium and osmium, are permitted by default. ReMatter stores every Mekanism chemical in the gas phase, even lithium and osmium. That phase marks the chemical form and keeps it apart from solid dusts and ingots.

Clone this wiki locally