-
Notifications
You must be signed in to change notification settings - Fork 1
single Freq Measurement
Measuring at one Frequency. For this measurement setting in the main Window the start frequency is used for the sequence. Additionally the frequency step must be set to 1.
- FID sequence
- Spin-Echo sequence
- Composite pulse sequence
- Spin echo phase sequence
Select the intended sequence in the main window. A new window will be opened to select the parameters of the selected sequence type. With saving the entered parameters all parameters will be updated in the sequence file ready for the experiment execution when RUN is pressed.
The following sequence are implemented with its predefined parameters.
For this sequence a 90° pulse gets generated.
For this sequence a 90° following a 180° pulse gets generated.
A Pulse sequence which changes its phase with time, i.e. undergoes phase modulation. It is used for suppressing coil ringdown and other artefacts synchronous to the RF-pulse.
For this sequence a 90° following a 180° pulse gets generated. Additionally the second pulse gets transmitted with different phase shifts.
Graphical user interface for File and Sequenz handling by Philipp
- Pull repo to local PC
- open cmd
- run start.py
- GUI should start
- set experiment file structure
- add comments to the Experiment and Data
- "save and close"
- select type of sequence
- save parameter
- questioned material
- Arduino connections
- tune and match
- SDR connections
- first run
- plot data
- save to file structure
- develop GUI