Skip to content

OpenCCU 3.89.14.20261121

Latest

Choose a tag to compare

@jens-maus jens-maus released this 21 Nov 16:24
· 1 commit to master since this release

This is release 3.89.14.20261121 of OpenCCU which is a MAJOR release with the following comprehensive bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Note

IMPORTANT: 🇺🇸 This is a very extensive update. Since the last release, all CCU components (ReGaHss, rfd, hs485d, HMIPServer, WebUI, …) and the operating system received a large number of bugfixes, improvements and general changes. In addition, all former OpenCCU patches of the WebUI and the eQ-3 components were migrated to OpenCCU-Base. Before applying this update, download a recent system backup (*.sbk) so you can restore your configuration if something goes wrong. If you run OpenCCU as a virtual machine or container, also create a snapshot.

HINWEIS: 🇩🇪 Bei diesem Release handelt es sich um ein sehr umfangreiches Update. Seit dem letzten Release haben alle CCU-Komponenten (ReGaHss, rfd, hs485d, HMIPServer, WebUI, …) und das Betriebssystem eine Vielzahl an Fehlerbehebungen, Verbesserungen und allgemeinen Änderungen erhalten. Zudem wurden alle bisherigen OpenCCU-Patches der WebUI und der eQ-3-Komponenten nach OpenCCU-Base überführt. Laden Sie vor dem Einspielen dieses Updates daher unbedingt ein aktuelles System-Backup (*.sbk) herunter, damit Sie Ihre Konfiguration im Fehlerfall wiederherstellen können. Wenn Sie OpenCCU als virtuelle Maschine oder Container betreiben, legen Sie zusätzlich einen Snapshot an.

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

🧩 OpenCCU-Base Changes

crypttool 1.0.0
devicetypes
  • fix the error messages Unknown paramset / GetAESMasterOperation() of rfd and ReGaHss when opening the device list … (OpenCCU-Base#335, @jens-maus)
  • fix the limits of SET_TEMPERATURE of the HM-CC-RT-DN-BoM, as in the HM-CC-RT-DN … (OpenCCU-Base#221, @jhoos70)
  • fix the long-press action of the CFM-TW LED profile writing the short-press register (OpenCCU-Base#63, @jens-maus)
eq3_char_loop 1.6
eq3configcmd 1.0.0
eq3configd 1.0.0
hmipserver
hs485d 1.3.0 – 1.5.0
hs485dLoader 1.0.0
hss_led 2.3.0 – 2.3.1
libelvutils 1.0.0
libeq3config 1.0.0
libhsscomm 1.0.0
libLanDeviceUtils 1.0.0
libUnifiedLanComm 1.0.0 – 1.1.0
libxmlparser 1.15
libXmlRpc 0.11 – 0.13
multimacd 1.3.0
  • add the option -v / --version, which prints the version of multimacd and of the libelvutils it uses (OpenCCU-Base#294, @jens-maus)
ReGaHss R1.00.0388.0256 – R1.00.0388.0269
  • fix the setters BreakOnRestart(value) of a rule destination and system.LogLevel(value) / system.SyslogIPAddress(value) … (OpenCCU#4722)
  • add the option -v / --version, which prints the version of ReGaHss and the versions of the OpenCCU-Base libraries … (OpenCCU-Base#294)
  • fix State(true) of a program called by a script not evaluating the program (OpenCCU#228)
  • fix a program being executed when it is activated, e.g. a new program at its first save in the WebUI or a program … (OpenCCU#228)
  • add the setting ExecuteOnStartup() of a program, whether it is executed at the start of ReGaHss (OpenCCU#223)
  • add the option "ScriptVariableScope=local" which makes the variables of the script of a program local to its execution (OpenCCU#84)
  • fix delays of programs between 2 and 3 hours being shifted by an hour on the day of the change to daylight saving time (OpenCCU#584)
  • fix the script of a program ending with a script runtime error after setting an alarm which has an expression … (OpenCCU#84)
  • log a warning if the script of a program uses a variable it does not declare before … (OpenCCU#84)
  • fix the script of a program with a syntax error being executed partially (OpenCCU#84)
  • fix the next time of monthly time modules repeated every n months (OpenCCU#886)
  • fix Next() of a time module which was not active since the start of ReGaHss logging "interface pointer are not … (OpenCCU#889)
  • fix calling a method on the result of a method call whose last parameter is a method call without parameters … (OpenCCU#983)
  • fix LastValue() of the number of active alarms and service messages always returning the current value (OpenCCU#467)
  • fix the WebUI showing alarms or service messages after a restart of ReGaHss which did not exist (OpenCCU#1016)
  • fix ReGaHss crashing if a script created a very long string, e.g. by doubling a string in a loop (OpenCCU#1420)
  • fix the error page of the web server showing its message and link on the same line when embedded into the WebUI (OpenCCU#1598)
  • fix programs not reacting to an update of a device datapoint or system variable although their condition was met (OpenCCU#1734, OpenCCU#1278)
  • fix URL encoded characters in the URL parameters of remote script calls (e.g. … (OpenCCU#2216)
  • fix foreach() silently skipping the loop if the loop variable was not declared as string, e.g. 'var x (OpenCCU#2612)
  • fix the WebUI showing wrong, incomplete or duplicated content or not loading at all, and ReGaHss crashing … (OpenCCU#2638, OpenCCU#1467)
  • fix undefined behaviour when loading and saving the parameter sets of devices, channels and UI data in the DOM file
  • fix ReGaHss aborting with "pure virtual method called" / "terminate called without an active exception" at the end of a …
  • fix the shutdown of the authentication service when ReGaHss is stopped
  • fix enumerations of the type etUserPages not being accessible (OpenCCU#2640)
  • fix sporadic crashes and hangs of ReGaHss when it is stopped with SIGTERM (ReGaHss-Test#196)
  • fix an out-of-bounds read when a new object (e.g. dom.CreateObject()) was added to the internal object map while the …
  • fix .ToString() and .Format() of UTC time values (OpenCCU#2670)
  • fix .Format() of time values without format raising a script runtime error (OpenCCU#2669)
  • fix foreach() over an integer count when the script assigns a value of another type to the loop variable (OpenCCU#2613, OpenCCU#2614, OpenCCU#2615, OpenCCU#2616, OpenCCU#2617, OpenCCU#2619, OpenCCU#2620, OpenCCU#2622)
  • fix ReGaHss crashing after system.SyslogIPAddress() was set to -1, "" or "255.255.255.255" (OpenCCU#2692)
  • fix IsTypeOf() of enumerations (OpenCCU#2950)
  • fix ReGaHss sporadically aborting when stopped with SIGTERM/SIGINT
  • fix ReGaHss aborting when its web server cannot accept a connection, e.g. because no file descriptors are left
  • fix out-of-bounds access of the DayProfileEntry() script method (OpenCCU#3179)
  • fix ChnNumber() logging an "invalid Address" error for channels without an address (OpenCCU#3156)
  • fix State() of IP data points without value type rejecting or changing the text to send (OpenCCU#3048)
  • fix ProgramExecute() keeping the trigger object/value of the previous program execution in the conditions … (OpenCCU#2978)
  • fix a NULL pointer dereference in the web server when an HTTP request without a parseable method is received (OpenCCU#4388)
rfd 2.6.1 – 2.7.1
SetInterfaceClock 1.0.0
ssdpd 1.0.0
tcl_homematic 1.1
  • add RemoveConfigPage, so an add-on can remove its own configuration page from /etc/config/hm_addons.cfg (OpenCCU-Base#48, @jens-maus)
webui

🏠 CCU/homematicIP Service Changes

  • all remaining OCCU/WebUI patches of OpenCCU were migrated to OpenCCU-Base, so OpenCCU no longer patches the OCCU/WebUI sources itself (188 pull requests #4205 – #4723, list, @jens-maus)
  • bump openccu-base to 3.89.14 (#4771, @jens-maus)
  • bump neoserver to 2.21.2 (#4769, @jens-maus)
  • feat(recovery): unpack firmware images as sparse files (#4741, @jens-maus)
  • build(generic_raw_uart): bump generic_raw_uart to 89489c3 (#4742, @jens-maus)
  • feat(rpi-rf-mod): drive the RPI-RF-MOD LED by software PWM on Raspberry Pi and Tinkerboard 2 (#4715, @jens-maus)
  • perf(rf): probe the GPIO header's radio module with a time limit (#4713, @jens-maus)
  • feat(recovery): append hardware diagnostics to the kept install log (#4711, @jens-maus)
  • perf(network): check the Ethernet carrier every 0.2 s instead of every 2 s (#4699, @jens-maus)
  • feat(hmipserver): optional loopback binding for the HmIP XML-RPC port (#4698, @jens-maus)
  • feat(multimacd): optional log level of its own (#4697, @jens-maus)
  • fix(recovery): remove a refused firmware upload from the userfs (#4692, @jens-maus)
  • refactor(overlay): move S50lighttpd from the WebUI overlay to the base (#4701, @jens-maus)
  • fix(init): replace /var/hm_mode in one step (#4700, @jens-maus)
  • fix(init): take the board serial fallback from the board's MAC address (#4693, @jens-maus)
  • fix(init): do not report a factory reset whose mkfs failed (#4569, @hobbyquaker)
  • fix(network): read the IPv4 address from the word after src (#4684, @jens-maus)
  • fix(recovery): userfs growth (#4566, @hobbyquaker)
  • fix(rpi-rf-mod): point the vRTC alias to rtc@a8 on ODROID-C4/N2 (#4660, @jens-maus)
  • fix(rpi-rf-mod): use pin 35 as RPI-RF-MOD reset on ODROID-N2 (#4659, @jens-maus)
  • Document RPI-RF-MOD radio LED support and limitations (#4658, @jens-maus)
  • build(packages): download single files for rpi-eeprom and eq3_char_loop (#4627, @jens-maus)
  • fix(rpi3): reset the LAN9514 through LAN_RUN when the kernel boots (#4596, @jens-maus)
  • fix(monit): restart HMIPServer before it runs out of file descriptors (#4614, @jens-maus)
  • fix(init): wait for rfd and hs485d to exit when stopping them (#4611, @jens-maus)
  • fix(recovery): apply the board kernel patches to the recovery kernel (#4598, @jens-maus)
  • fix(monit): avoid a readlink fork per fd in checkStaleDevice.sh (#4547, @jens-maus)
  • fix(rf): restart the RF stack after an HB-RF-ETH session reset (#4527, @jens-maus)
  • fix(rf): wait for raw-uart device access before RF module detection (#4525, @jens-maus)
  • fix(package): add missing hash files for eq3_char_loop and hardkernel-boot (#4517, @jens-maus)
  • fix(monit): restart rfd and HMIPServer if a multimacd restart left them with a stale device (#4329, @jens-maus)
  • fix(HMIPServer): add checkHmIPsecurityCounter.sh to protect HmIP security counter against 32 bit overflow (#4317, @jens-maus)
  • switch generic_raw_uart/detect_radio_module to OpenCCU/piVCCU fork (#4302, @jens-maus)
  • fix(ntp): ensure valid system time before HMIPServer starts (#4276, @jens-maus)
  • build(openccu-base): disable default components in minimal builds (#4246, @jens-maus)
  • fix(recovery): share runtime state between /run and /var/run (#4235, @jens-maus)
  • Remove multilib32 from all recovery-system platform configs (#4224, @jens-maus)

🌐 WebUI Changes

  • fix(webui): show script errors and fix popup size check in script editor (#4689, @jens-maus)
  • fix(lighttpd): create the certificate without an IP address when there is none, leave a managed server.pem alone (#4567, @hobbyquaker)
  • fix(webui): accept only de and en as system language (#4683, @jens-maus)
  • fix(webui): keep the file upload buttons usable with the keyboard (#4678, @jens-maus)
  • fix(webui): fix the layout and empty selection of the file upload buttons (#4677, @jens-maus)
  • fix(webui): keep the error pages hidden without JavaScript (#4674, @jens-maus)
  • fix(webui): keep the value field of the light dialogs inside its box (#4672, @jens-maus)
  • fix(webui): keep the filter buttons of the room and function list working (#4666, @jens-maus)
  • fix(webui): translate only the start page favorites after a rendered control (#4663, @jens-maus)
  • fix(webui): translate updated controls in the favorites view (#4662, @jens-maus)
  • fix(webui): use current time zone names in the location list (#4657, @jens-maus)
  • fix(webui): keep the order of duplicate value list entries (#4655, @jens-maus)
  • fix(webui): keep the selected value list entry when it is unchanged (#4654, @jens-maus)
  • fix(webui): define svEscapeHtml only once in the system variable dialog (#4653, @jens-maus)
  • fix(webui): clear the channel assignment when the channel chooser is cancelled (#4650, @jens-maus)
  • fix(webui): skip the presence variable and reject empty numbers in the value dialog (#4648, @jens-maus)
  • fix(webui): keep text values and units intact in the system variable value dialog (#4646, @jens-maus)
  • fix(webui): give the submenu icons an empty alt text (#4643, @jens-maus)
  • fix(webui): restore the certificate check and harden the upload helper (#4636, @jens-maus)
  • fix(webui): accept only uploaded files and known parameters in the upload flow (#4633, @jens-maus)
  • fix(webui): hide duty cycle rows of interfaces missing from the update (#4629, @jens-maus)
  • fix(webui): keep the serial number column of the firmware dialog in the table (#4625, @jens-maus)
  • fix(webui): load the addon update notice asynchronously with a time limit (#4621, @jens-maus)
  • fix(webui): escape the addon update notice on the start page (#4619, @jens-maus)
  • fix(webui): round threshold values and decimal ties in ProofAndSetValue (#4615, @jens-maus)
  • fix(webui): keep the BidCos-RF input and the integer precision in ProofAndSetValue (#4613, @jens-maus)
  • fix(webui): drop METER_CONSTANT_ENERGY from the three decimal branches (#4606, @jens-maus)
  • fix(webui): drop floating point residue from converted parameter values (#4602, @jens-maus)
  • fix(webui): report success of setEnabledServiceMsg once the setting is stored (#4600, @jens-maus)
  • WebUI: Improve system variable editing (#4413, @MichaelN0815)
  • fix(webui): skip absent list filters and keep firmware filter order on restore (#4595, @jens-maus)
  • fix(webui): restore sticky filters of slowly loading popups and tolerate blocked storage (#4592, @jens-maus)
  • fix(webui): restore the string filters without an error when none are stored (#4590, @jens-maus)
  • fix(webui): calculate the ESI energy cost from the unrounded kWh value (#4585, @jens-maus)
  • fix(webui): correct two unit strings of the unit display patch (#4584, @jens-maus)
  • fix(webui): show a humidity of 0 % and hide an invalid valve level in the heating control (#4582, @jens-maus)
  • fix(webui): show the valve state of the heating control only when it exists (#4579, @jens-maus)
  • fix(webui): remove the leftovers of the field test option in the storage settings (#4574, @jens-maus)
  • fix(webui): use the corrected channel highlights in the device database too (#4571, @jens-maus)
  • fix(webui): correct the channel highlights of all WRC6 variants (#4565, @jens-maus)
  • fix(webui): show the device list filters as entered when reopened (#4561, @jens-maus)
  • fix(webui): keep plain text and case in the regex device list filters (#4560, @jens-maus)
  • fix(webui): validate the new channel names before renaming all channels (#4558, @jens-maus)
  • fix(webui): translate the rename channels confirmation and fix its tooltip (#4552, @jens-maus)
  • fix(webui): default the Homematic IP log level to ERROR when it is not set (#4549, @jens-maus)
  • fix(webui): mention the Tailscale relays in the VPN help text (#4545, @jens-maus)
  • fix(webui): tell that changed network settings need a reboot (#4543, @jens-maus)
  • fix(webui): show the system variable move arrows only for existing users (#4538, @jens-maus)
  • fix(webui): report internal channels as not writable and keep the empty channel chooser hint (#4533, @jens-maus)
  • fix(webui): open the device and channel settings only once the device list is loaded (#4530, @jens-maus)
  • fix(webui): keep the program editor origin and require admin rights for the device picture link (#4528, @jens-maus)
  • fix(webui): show negated value range conditions in the program list (#4524, @jens-maus)
  • fix(webui): pass the session of SendPOSTRequest under its own name (#4520, @jens-maus)
  • fix(webui): do not block updates when the free space is unknown (#4513, @jens-maus)
  • fix(webui): write the central link template of 0171 like the generated webui.js (#4508, @jens-maus)
  • fix(webui): fix the button event to CCU setting of the channel dialog (#4507, @jens-maus)
  • fix(webui): keep the translation cache in sync with reloaded texts (#4503, @jens-maus)
  • fix(webui): sort missing values first and keep equal rows in natural sorting (#4499, @jens-maus)
  • fix(webui): handle zero and southern hemisphere UTC offsets in getPositionData (#4498, @jens-maus)
  • fix(webui): fix gateway assignment results and display names of patch 0161 (#4495, @jens-maus)
  • fix(webui): fix escaping and roaming state of the gateway assignment (#4493, @jens-maus)
  • fix(webui): fix tweaks, response and texts of the advanced settings (#4488, @jens-maus)
  • fix(webui): escape the system name and harden the advanced settings (#4484, @jens-maus)
  • fix(webui): clear the gateway duty cycle and firmware without status (#4482, @jens-maus)
  • fix(webui): translate and harden the gateway duty cycle and firmware columns (#4481, @jens-maus)
  • fix(webui): skip devices of interfaces without URL in hm_autoconf (#4477, @jens-maus)
  • fix(webui): fix duplicate code and function mapping of hm_autoconf (#4476, @jens-maus)
  • fix(webui): fix favorite escaping, user assignment and position sorting (#4473, @jens-maus)
  • fix(webui): select system variables in the popup by keyboard (#4468, @jens-maus)
  • fix(webui): add the missing row tag of the string variable filter (#4467, @jens-maus)
  • fix(webui): correct grouping details of the device firmware dialog (#4465, @jens-maus)
  • fix(webui): show the restore config button only to administrators (#4462, @jens-maus)
  • fix(webui): use unique row IDs for favorites in several user lists (#4461, @jens-maus)
  • fix(webui): escape the object names in the delete confirmation dialogs (#4458, @jens-maus)
  • fix(webui): show an error when a control panel popup fails with status 0 (#4453, @jens-maus)
  • fix(webui): select the valve positions of the eTRV settings page correctly (#4444, @jens-maus)
  • fix(webui): correct the sabotage, heating/cooling and fine dust labels of the maintenance tile (#4441, @jens-maus)
  • fix(webui): reject recovery mode when the platform is unknown (#4435, @jens-maus)
  • fix(webui): harden the recovery mode API of rootfs patch 0012 (#4434, @jens-maus)
  • refactor(webui): remove the remaining ReGa version selection (#4431, @jens-maus)
  • fix(webui): show the end of time ranges in program conditions again (#4426, @jens-maus)
  • fix(webui): clear the channel list when the control filter matches nothing (#4424, @jens-maus)
  • fix(webui): declare the web app manifest icons for general use (#4409, @jens-maus)
  • fix(webui): escape single backslashes in user favorite system variables (#4383, @jens-maus)
  • fix(webui): reload the system variable list after saving the internal flag (#4376, @jens-maus)
  • fix(webui): escape system variable descriptions before adding line breaks (#4368, @jens-maus)
  • fix(webui): keep the filler cell of short-press-only keys (#4366, @jens-maus)
  • fix(webui): build the install wizard acknowledgement name like the backend (#4362, @jens-maus)
  • fix(webui): keep the plain user name for install wizard acknowledgements (#4360, @jens-maus)
  • fix(webui): correct spelling of the Tailscale authentication button (#4358, @jens-maus)
  • fix(webui): do not fail the UI update for guests without a ReGa save button (#4354, @jens-maus)
  • fix(webui): match the serial number filter fallback against the serial number (#4355, @jens-maus)
  • fix(webui): check the HmIP-RF duty cycle when BidCos-RF lists no interface (#4349, @jens-maus)
  • fix(webui): do not treat add-on warnings on stderr as a failed operation (#4348, @jens-maus)
  • fix(webui): keep failed add-on uninstall scripts and survive log errors (#4347, @jens-maus)
  • fix(webui): keep extended descriptions working for unknown WGT/WGTC channels (#4343, @jens-maus)
  • fix(webui): keep the page content out of the keyboard tab order (#4337, @jens-maus)
  • fix(webui): only let administrators change the access level of users (#4332, @jens-maus)
  • fix(webui): keep the built-in Admin user an administrator (#4331, @jens-maus)
  • fix(webui): include hidden log files in the log file download (#4323, @jens-maus)
  • fix(webui): show add-ons with the same name in the sorted add-on list (#4319, @jens-maus)
  • fix(webui): save the object model before ending the session on logout (#4297, @jens-maus)
  • fix(webui): only resolve a channel ID in setVisible() for the channel dialog (#4283, @jens-maus)
  • fix(webui): preserve multiple spaces in string system variable values again (#4280, @jens-maus)
  • build(openccu-base): update WebUI Bootstrap from 5.2.3 to 5.3.8 (#4256, @jens-maus)
  • Migrate WebUI Script Editor from CodeMirror 5 to bundled CodeMirror 6 (#4207, @jens-maus)

🖥️ Operating System Changes

🔄 Other Changes

  • bump rpi-eeprom to 2026-11-17 (RPi4) and 2026-11-16 (RPi5) (#4760, #4750, @jens-maus)
  • bump buildroot to 2026.08.2 (#4758, @jens-maus)
  • build(libopenssl): switch to OpenSSL 3.5 LTS and fix lighttpd's EOL check (#4746, @jens-maus)
  • fix(install-proxmox): avoid RAM-backed tmpfs and explain failures (#4740, @jens-maus)
  • docs(hss_led): document free colors and brightness of the radio LED (#4718, @jens-maus)
  • feat(rpi): light the RPI-RF-MOD status LED yellow from power-on (#4714, @jens-maus)
  • fix(rpi5): enable CONFIG_BCM2712 in U-Boot (#4712, @jens-maus)
  • fix(rpi-eeprom): report a bootloader update only for a newer image (#4710, @jens-maus)
  • feat(rpi): enable the memory cgroup controller on the Raspberry Pis (#4703, @jens-maus)
  • fix(xe-guest-utilities): add the files the systemd install step refers to (#4694, @jens-maus)
  • build(ova): select host-qemu explicitly for qemu-img (#4695, @jens-maus)
  • ci(release): add the OpenCCU-Base component changes to the release notes (#4641, @jens-maus)
  • docs: forbid AI attribution in issue and pull request comments (#4610, @jens-maus)
  • fix(rpi3): do not start USB in U-Boot on every boot (#4597, @jens-maus)
  • build: drop init scripts of deselected optional packages (#4568, @hobbyquaker)
  • bump qemu-guest-agent to 11.1.3 (#4580, @jens-maus)
  • fix(rpi): bounce dwc_otg IN transfers of a length not a multiple of 4 (#4572, @hobbyquaker)
  • build(deps): bump body-parser from 2.3.0 to 2.4.0 in /home-assistant-addon-proxy (#4534, @dependabot[bot])
  • docs(led): describe the disabled= field of the hss_ledctl status (#4451, @jens-maus)
  • build(deps): bump proxy-addr from 2.0.7 to 2.0.8 in /home-assistant-addon-proxy (#4400, @dependabot[bot])
  • docs: add AGENTS.md as single source of agent instructions (#4393, @jens-maus)
  • docs: report bugs in eQ-3 CCU components in the OpenCCU issue tracker (#4359, @jens-maus)
  • Update wiki links and use the term App for Home Assistant (#4356, @jens-maus)
  • Add generator and workflow for the supported devices wiki pages (#4345, @jens-maus)
  • Sync RPi usb-storage UAS quirks with HAOS (#4313, @jens-maus)
  • Use real upstream versions in dependency update PR titles (#4308, @jens-maus)
  • chore: disable automatic attribution in commits and pull requests (#4267, @jens-maus)
  • recovery(rpi3): cap initrd relocation for Pi Zero 2 W recovery boot (#4220, @jens-maus)

📝 Support:

For support on installation and help please visit the following web pages:

OpenCCU - Documentation 🇺🇸
OpenCCU - Discussions 🇺🇸
OpenCCU - Dokumentation 🇩🇪
OpenCCU - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):