Fuzzing

Fuzzing

Source of truth: hmailserver/docs/Fuzzing.md, kept in the repository and copied here.

Fuzzing the parsers

Every message the server accepts is untrusted input, and the code that reads it runs inside the one process that holds every mailbox on the machine. A parser bug here is not a bad request that gets a 500 — it is a mail outage, plus whatever the write path had half-finished when the process went down. That asymmetry is the whole reason this harness exists.

This document covers the MIME parser, which is done. HTML, iCalendar and vCard are the same shape of problem and are not done; see What is not covered yet so nobody mistakes a clean MIME run for a clean parser story.

The harness lives in fuzz\ at the repository root.

Why this waited on the crash oracle

Read this section before anything else, because it is the reason the fuzzing item sat at "not started" for so long while nine other prerequisites went in ahead of it.

A fuzzer is a machine for producing inputs. It is not a machine for noticing that something went wrong. Something else has to be the oracle — the thing that turns "the program did something bad" into a signal. With no oracle, a fuzzer runs millions of malformed messages through the parser, the parser corrupts memory on one of them, the process carries on with corrupted state, the run reports "no findings", and everyone concludes the parser is fine. That is worse than not fuzzing, because it produces a false clean bill of health.

This codebase had a specific version of that problem, and it is worth being precise about it:

• MimeBody::LoadFromFile wraps the entire parse in catch (...), copies the offending message into Problematic messages, reports through ErrorManager and returns success.
• The server is compiled with /EHa (ExceptionHandling=Async in hMailServer.vcxproj). Under /EHa, catch (...) catches structured exceptions as well as C++ ones — which means it catches access violations.

Put those two together and an out-of-bounds write in the MIME parser presents, in production, as a log line saying a message could not be parsed. The process survives. The message is preserved for inspection. And the memory that got scribbled on belongs to something else entirely, so the consequence appears later, somewhere unrelated, as a corrupted mailbox or a crash with a stack that points at innocent code.

So there were two things to build, in order:

1. An oracle for the running server. Common\Util\CrashOracle.{h,cpp} installs a vectored exception handler, which sees a first-chance exception before any catch (...) gets the chance to swallow it, and records it. The regression suite checks the oracle after every test, so a swallowed access violation now fails the test that provoked it instead of passing quietly. That is what makes the regression suite an oracle rather than just a lot of asserts (over 2,000 tests as of September 2026 — a figure that only ever goes up, so treat it as a floor rather than a fact to maintain).
2. An oracle for the fuzz build, which is AddressSanitizer. ASan is stronger than a crash handler: it traps the first out-of-bounds byte rather than waiting for an access that happens to land on an unmapped page, and it reports reads as well as writes. Almost every finding this harness will produce is a read one byte past the end of a buffer — something that would never fault in production and would never be noticed without it.

The relationship between them is the point. ASan finds the bug in a target that runs the parser in isolation, thousands of times a second. The crash oracle keeps the same class of bug visible in the real server, where the parser runs inside a catch (...) that would otherwise hide it. Neither replaces the other, and doing the fuzzing first would have produced findings nobody could confirm against a running server.

One consequence worth knowing: the fuzz build is compiled /EHsc, not /EHa, so catch (...) in the parser does not swallow access violations there. ASan traps before any handler runs anyway. The fuzz build is therefore strictly better at surfacing memory errors than the shipped build is at surviving them — which is the right direction for a bug hunt, and another reason a finding here needs a regression test in the suite rather than only a corpus entry.

The two paths, side by side

This is the whole argument in one picture. The same out-of-bounds write, in the shipped server and in the fuzz build:

flowchart TB
    BUG["An out-of-bounds write<br/>in the MIME parser"]

    subgraph prod["The shipped server - before the crash oracle"]
        direction TB
        P1["Access violation raised<br/>as a structured exception"]
        P2["/EHa makes catch (...) in<br/>MimeBody::LoadFromFile catch it"]
        P3["Message copied to<br/>'Problematic messages',<br/>ErrorManager line written,<br/>function returns SUCCESS"]
        P4["Process carries on with<br/>corrupted memory belonging<br/>to something else"]
        P5["Symptom appears later,<br/>somewhere unrelated:<br/>a corrupted mailbox, or a crash<br/>with a stack pointing at innocent code"]
        P1 --> P2 --> P3 --> P4 --> P5
    end

    subgraph oracle["The shipped server - with CrashOracle"]
        direction TB
        O1["Vectored exception handler sees<br/>the FIRST-CHANCE exception,<br/>before any catch (...)"]
        O2["Recorded"]
        O3["The regression suite checks the<br/>oracle after every test, so the test<br/>that provoked it FAILS"]
        O1 --> O2 --> O3
    end

    subgraph fuzzb["The fuzz build"]
        direction TB
        F1["ASan traps the FIRST<br/>out-of-bounds byte -<br/>reads as well as writes"]
        F2["libFuzzer stops, prints the report,<br/>writes the input to fuzz artifacts,<br/>exits 77"]
        F1 --> F2
    end

    BUG --> P1
    BUG --> O1
    BUG --> F1

Loading

Neither oracle replaces the other. ASan finds the bug in a target that runs the parser in isolation thousands of times a second; the crash oracle keeps the same class of bug visible in the real server, where the parser runs inside a catch (...) that would otherwise hide it. Building the fuzzer first would have produced findings nobody could confirm against a running server — which is why this item sat at "not started" while nine prerequisites went in ahead of it.

	Shipped Release build	Fuzz build
Exception model	/EHa (ExceptionHandling=Async)	/EHsc
catch (...) catches access violations	yes — that is the problem	no
CRT	dynamic (/MD)	static (/MT) — /MD cannot link against clang_rt.fuzzer at all
Allocator under test	the DLL CRT's	the static CRT's — worth remembering when reading a finding
ASSERT / HM_ASSERT	compiled out, unless built -Asserts (then reported as HM6364)	a no-op in the shim, matching Release, unless built -Asserts
Memory-error oracle	CrashOracle, a vectored exception handler	AddressSanitizer
What a finding looks like	a failed regression test naming the provoking test	exit code 77 plus the exact bytes

Building it

The one-time prerequisite is a clang toolchain alongside MSVC, with libFuzzer's and AddressSanitizer's runtime libraries. Two routes; the second is the one in use on this bench, and it is here first because it is the one that has actually been made to work end to end.

Portable LLVM, user-local, no elevation. This is what the build was verified against:

# ~820 MB download, ~2.5 GB extracted. Windows' own tar handles .xz and .zst.
$rel = Invoke-RestMethod 'https://api.github.com/repos/llvm/llvm-project/releases/tags/llvmorg-22.1.8' `
   -Headers @{ 'User-Agent' = 'hmailserver-build' }
$asset = $rel.assets | Where-Object name -eq 'clang+llvm-22.1.8-x86_64-pc-windows-msvc.tar.xz'
Invoke-WebRequest $asset.browser_download_url -OutFile "$env:TEMP\llvm.tar.xz"

$target = "$env:LOCALAPPDATA\Programs\LLVM-22.1.8"
New-Item -ItemType Directory -Force $target | Out-Null
tar -xf "$env:TEMP\llvm.tar.xz" -C $target --strip-components=1

$env:PATH = "$target\bin;$env:PATH"      # before build-fuzz.ps1

Nothing goes into Program Files, nothing is written to the registry, and it is removed by deleting one folder. That matters more than it sounds: the alternative below needs administrator rights, and winget install LLVM.LLVM is not a substitute because it has no user-scope installer at all (--scope user fails with "No applicable installer found") and its machine scope needs elevation.

Or the Visual Studio component, if you have administrator rights on the machine:

Visual Studio Installer → Modify → Individual components → C++ Clang tools for Windows (component id Microsoft.VisualStudio.Component.VC.Llvm.Clang)

& "${env:ProgramFiles(x86)}\Microsoft Visual Studio\Installer\setup.exe" modify `
    --installPath "${env:ProgramFiles(x86)}\Microsoft Visual Studio\18\BuildTools" `
    --add Microsoft.VisualStudio.Component.VC.Llvm.Clang --passive

That component ships the sanitizer runtimes too, and Find-ClangCl.ps1 prefers it via vswhere when it is present. It is second in this list only because it was not available here.

Three things that are not optional, each of which costs a build to rediscover

All three are already handled by build-fuzz.ps1; they are written down because the symptoms point somewhere unhelpful.

1. /D_DISABLE_STRING_ANNOTATION=1 and /D_DISABLE_VECTOR_ANNOTATION=1. Without them the link fails with lld-link: error: /failifmismatch: mismatch detected for 'annotate_string'. The prebuilt clang_rt.fuzzer library is compiled with MSVC STL's ASan container annotations off, and the STL stamps a /failifmismatch directive into every object recording which way it was built, so any translation unit that enables them refuses to link against libFuzzer. The cost is the container-overflow checks on std::string and std::vector; the only way to keep them is to rebuild compiler-rt from source to match.
2. The static CRT (/MT) is the default, because /MD cannot link at all — /failifmismatch: mismatch detected for 'RuntimeLibrary', since that same library is built against the static CRT. Consequence worth knowing when reading a finding: the allocator under test is the static CRT's, not the DLL's that the shipped server uses.
3. clang_rt.asan_dynamic-x86_64.dll must sit next to the executables even under /MT. A /MT target still imports it and still dies with 0xc0000135 (STATUS_DLL_NOT_FOUND) before running a single input. build-fuzz.ps1 copies it for both CRT choices; it used to copy only for /MD, on the reasonable-sounding but wrong assumption that a static CRT implies a static ASan.

And why the harness has its own stdafx.h

fuzz\harness\shim\stdafx.h is first on the include path so that a server source file's #include "stdafx.h" finds it instead of the real one. The real header #imports the ADO type library, which clang rejects outright — "#import of type library is an unsupported Microsoft feature" — and pulls in ATL; a parser needs neither. The shim also has to include Util/StdString.h, because server sources use String and AnsiString without including it themselves, relying on the precompiled header.

Watch out for a clang that is not this one. clang-cl turns up on PATH from all sorts of places — a Swift toolchain, an Android NDK, a Chocolatey LLVM — and those builds compile this code perfectly well but do not ship clang_rt.fuzzer-x86_64.lib. The symptom is LNK1181 twenty minutes into a build. build-fuzz.ps1 prefers the Visual Studio toolchain and checks for the runtime libraries before it compiles anything, so it fails immediately with the install instructions instead.

.\fuzz\build-fuzz.ps1

The build:

• finds clang-cl through vswhere and imports the MSVC environment itself, so it works from an ordinary PowerShell prompt (clang-cl links with link.exe and against the MSVC CRT, so that environment is not optional);
• compiles the five real Common\Mime sources (Mime, MimeChar, MimeCode, MimeType, CodePages) plus the five utility translation units they need (Charset, ByteBuffer, Unicode, RegularExpression, StringParser), with -fsanitize=fuzzer-no-link,address;
• links one executable per target with -fsanitize=fuzzer,address into fuzz\bin\;
• copies clang_rt.asan_dynamic-x86_64.dll next to the executables for both CRT choices, because a /MT target imports it too — see point 3 above, which is the bug this bullet used to repeat;
• regenerates the seed corpus from the real test messages.

It never builds hMailServer.sln, never runs its pre/post-build events and never touches the installed service, so it cannot disturb a regression run in progress.

Boost: two of the compiled translation units use header-only Boost (boost::regex in RegularExpression.cpp, boost::tokenizer and boost::lexical_cast in StringParser.cpp). The script picks them up from %hMailServerLibs%\boost_1_92_0 like the main build does, or from -BoostInclude <dir>. No Boost library is linked.

What build-fuzz.ps1 actually compiles

The harness is deliberately small: ten translation units and a shim, not the server.

flowchart LR
    subgraph shim["fuzz/harness/shim"]
        SH["stdafx.h - FIRST on the include path,<br/>so a server source's #include 'stdafx.h'<br/>finds this instead of the real one"]
        WHY["The real header #imports the ADO type<br/>library, which clang rejects outright,<br/>and pulls in ATL. A parser needs neither.<br/>The shim also includes Util/StdString.h,<br/>because server sources use String and<br/>AnsiString relying on the real PCH"]
    end
    subgraph mime["Common/Mime - the code under test"]
        M["Mime, MimeChar, MimeCode,<br/>MimeType, CodePages"]
    end
    subgraph util["Common/Util - what it needs"]
        U["Charset, ByteBuffer, Unicode,<br/>RegularExpression, StringParser"]
    end
    BOOSTH["Boost, header-only:<br/>boost::regex in RegularExpression,<br/>boost::tokenizer and lexical_cast<br/>in StringParser. Nothing linked"]
    CC["clang-cl<br/>-fsanitize=fuzzer-no-link,address"]
    LNK["lld-link<br/>-fsanitize=fuzzer,address"]
    T1["mime_message_fuzzer"]
    T2["mime_header_fuzzer"]
    T3["mime_decode_fuzzer"]
    DLL["clang_rt.asan_dynamic-x86_64.dll<br/>copied beside them for BOTH CRT choices -<br/>a /MT target still imports it and still<br/>dies 0xc0000135 without it"]

    SH --> CC
    M --> CC
    U --> CC
    BOOSTH --> CC
    CC --> LNK
    LNK --> T1
    LNK --> T2
    LNK --> T3
    DLL -.-> T1
    DLL -.-> T2
    DLL -.-> T3

Loading

It never builds hMailServer.sln, never runs its pre- or post-build events and never touches the installed service, so it cannot disturb a regression run in progress.

Running it

# a five-minute smoke test - do this first, and after any parser change
.\fuzz\run-fuzz.ps1 -Target mime_message_fuzzer -Minutes 5

# seconds: replay the seed corpus and everything previous runs kept, then exit
.\fuzz\run-fuzz.ps1 -Target mime_header_fuzzer -Replay

# overnight, four cores
.\fuzz\run-fuzz.ps1 -Target mime_message_fuzzer -Minutes 480 -Jobs 4

The three targets, and what each is for:

Target	Input	Why it is separate
mime_message_fuzzer	a whole message	MimeBody::Load is what every spooled message goes through, and the only entry point that recurses (nested multipart, nested message/rfc822). Also round-trips through Store() and re-parses, because the serialiser runs on attacker-controlled structure every time a rule rewrites a header.
mime_header_fuzzer	a header block	Headers are parsed far more often than bodies — IMAP FETCH ENVELOPE, BODY[HEADER], the rule engine and the DKIM signer all load headers alone. Smaller inputs mean a much higher execution rate and a deeper walk into folding and parameter parsing. Runs all three shapes production uses, including Utilities::GetMimeHeader's truncated length.
mime_decode_fuzzer	selector byte + payload	Spends every execution inside the codecs (base64, quoted-printable, RFC 2047 encoded words, RFC 2231 parameter continuations) instead of first having to produce a plausible header.

How long

Fuzzing is not a pass/fail gate you run once; it is a background process with a long tail. Useful budgets:

• 5 minutes per target after any change to Common\Mime or to something it calls. This re-runs the whole corpus and mutates around it, and it is fast enough to be habitual. It belongs in the same reflex as running the suite.
• A few hours the first time a target is ever run, and after a real change to the parser's structure. Watch the cov: counter in libFuzzer's output: while it is still climbing, the run is still learning. When it has been flat for an hour, more of the same is unlikely to help.
• Overnight with -Jobs 4 before a release that changed message handling.
• Between runs, keep the corpus. fuzz\corpus\<target>\ accumulates every input libFuzzer found interesting, and it is the single most valuable thing the exercise produces — a later run starts from that coverage instead of from scratch. It is machine-local and not committed.

Once a corpus gets large, minimise it before a long run. -merge=1 keeps only the inputs needed to hold the same coverage, which makes every subsequent execution cheaper:

mkdir fuzz\corpus\merged
.\fuzz\bin\mime_message_fuzzer.exe -merge=1 fuzz\corpus\merged fuzz\corpus\mime_message_fuzzer

Two practical notes

Antivirus. Exclude fuzz\ from real-time scanning. A run writes corpus entries and crash artifacts continuously — thousands of small files that each look like a malformed email — and this project has already lost whole regression runs to security software interfering with the test environment (build\preflight-tests.ps1 warns about the interference sources it can detect). A scanner that quarantines an artifact mid-run destroys the one thing a finding is worth: the exact bytes.

Do not run it on the mail server. The targets are ordinary user-mode processes and do not touch the service, but a fuzz run will happily use every core it is given.

Budgets at a glance

When	Command	Why that long
After any change to Common\Mime or something it calls	-Minutes 5, each target	Re-runs the whole corpus and mutates around it. Fast enough to be habitual — the same reflex as running the suite
Seconds, any time	-Replay	Replays the seed corpus and everything previous runs kept, then exits. This is what proves the committed regression inputs still do not crash
First time a target is ever run, or after a structural change	a few hours	Watch libFuzzer's cov: counter. While it climbs, the run is still learning; flat for an hour means more of the same will not help
Before a release that changed message handling	-Minutes 480 -Jobs 4, overnight	RELEASE.md step 8c requires 30 minutes per harness for a minor release; a message-handling release deserves more
Before a long run, once the corpus is large	-merge=1 into a fresh directory	Keeps only the inputs needed to hold the same coverage, so every later execution is cheaper

What to do with a finding

libFuzzer stops on the first finding, prints the report, and writes the input that produced it to fuzz\artifacts\<target>\crash-<sha1> (or timeout-, oom-, leak-). run-fuzz.ps1 prints the path and the reproduce command. The exit code is 77 for a finding; anything else non-zero means the target could not start or a flag was rejected.

The finding workflow, drawn

flowchart TD
    RUN["run-fuzz.ps1 stops.<br/>Exit code 77 = a finding.<br/>Anything else non-zero = the target<br/>could not start or a flag was rejected"]
    RUN --> REPRO["-Reproduce the artifact:<br/>one input, one execution,<br/>no mutation, no corpus"]
    REPRO --> DOES{"Does it<br/>reproduce?"}
    DOES -- no --> LEAK["State leaked between executions.<br/>That is itself a bug - in the harness<br/>or in the parser's static state.<br/>Chase it, do not shrug"]
    DOES -- yes --> KIND{"What kind<br/>of finding?"}

    KIND -- "heap-buffer-overflow READ,<br/>one or two bytes" --> READ["REAL. The easiest to dismiss,<br/>because in production the byte<br/>usually exists. Whether it faults<br/>depends on the allocator's mood,<br/>and the value read steers the parse"]
    KIND -- "stack-overflow" --> STACK{"Which frames<br/>repeat?"}
    STACK -- "MimeBody::Load" --> SREAL["REAL: the parser recurses once<br/>per nesting level with no depth limit"]
    STACK -- "hm_fuzz::ExerciseBody" --> SHARN["The HARNESS ran out of stack on a<br/>tree the parser survived.<br/>Lower kMaxTraversalDepth, file nothing"]
    KIND -- "timeout or oom" --> DOS["REAL, and for a mail server a<br/>remote denial of service rather than<br/>a performance note. Look for<br/>'budget goes non-positive,<br/>loop still appends'"]
    KIND -- "assertion abort" --> ASRT["Only possible on an -Asserts build.<br/>A violated internal invariant,<br/>not a crash. Different investigation -<br/>and not fixed by adding a check<br/>at the assert"]

    READ --> MIN
    SREAL --> MIN
    DOS --> MIN
    ASRT --> MIN["-minimize_crash=1<br/>4 KB of mutated mail usually<br/>becomes a dozen bytes"]
    MIN --> FIX["Fix it in Common/Mime"]
    FIX --> REACH{"Reachable over<br/>a protocol?"}
    REACH -- "yes - and most are" --> SUITE["Write a regression-suite test.<br/>A corpus entry only proves the process<br/>no longer dies, and only when somebody<br/>runs the fuzzer"]
    REACH -- no --> KEEP
    SUITE --> KEEP["Move the artifact into<br/>fuzz/regression/target/ and commit it.<br/>Byte-exact, marked binary -<br/>a reproducer whose line endings were<br/>normalised still looks like one and<br/>no longer reproduces anything"]

Loading

Three routes into the parser worth remembering when judging "reachable over a protocol", because they cover most findings: a header value reaches the RFC 2047 decoder through IMAP FETCH ENVELOPE; a Content-Disposition filename reaches the parameter decoder through the attachment API; a nested multipart reaches the recursion through plain SMTP delivery.

1. Reproduce it, deterministically.

.\fuzz\run-fuzz.ps1 -Target mime_header_fuzzer -Reproduce .\fuzz\artifacts\mime_header_fuzzer\crash-<sha1>

One input, one execution, no mutation, no corpus. If it does not reproduce, the finding depended on state that leaked between executions — which is itself a bug, in the harness or in the parser's static state, and worth chasing rather than shrugging at.

2. Work out what kind of finding it is, because three of the four kinds are routinely misread:

• heap-buffer-overflow READ of one or two bytes — the most common finding in this parser and the easiest to dismiss, because in production the byte being read usually exists (it is inside the same allocation's slack, or it is the NUL terminator's neighbour). Do not dismiss it. It is a real out-of-bounds read; whether it faults depends on the allocator's mood, and the value read steers the parse.
• stack-overflow — read the stack trace before filing. If the repeated frames are MimeBody::Load, that is a genuine finding: the parser recurses once per nesting level with no depth limit, so a small message can build a very deep tree, and a deep enough one exhausts the stack. If the repeated frames are hm_fuzz::ExerciseBody, the harness ran out of stack on a tree the parser survived; raise nothing and lower kMaxTraversalDepth instead.
• timeout / oom — a parser that stops making progress or allocates without bound is a remote denial of service, which for a mail server is a real vulnerability rather than a performance note. MimeEncodedWord::BEncode had a loop of exactly this shape, and it is the example to keep in mind because the cause was arithmetic rather than buffer handling: its block size was (MAX_ENCODEDWORD_LEN - charset_length - 7) / 4 * 3, and since that constant is 75, a charset name of 69 characters or more drove it to zero or below — a zero-size block means the loop makes no progress while appending an encoded-word header to its output every iteration, so it never terminated at all. The only guard was an ASSERT, compiled out of Release. Both BEncode and QEncode now fall back to the raw encoder when no legal encoded word can be built (if (nMaxBlockSize < 3)), and the reproducer lives in fuzz\regression\mime_decode_fuzzer\out-of-memory-mimeunicodeencoder-encodevalue, so every run re-proves it. Read the shape, not the location: the same "budget goes non-positive, loop still appends" pattern is what to look for in the next one.
• An assertion abort — only possible if the target was built with -Asserts. The shipped Release build compiles ASSERT to ((void)0), so an assertion failure is a violated internal invariant, not a crash. Interesting, but a different investigation, and not something to fix by "adding a check" at the assert.

3. Minimise the input. libFuzzer will shrink it for you, which usually turns 4 KB of mutated mail into a dozen bytes and makes the actual defect obvious:

.\fuzz\bin\mime_header_fuzzer.exe -minimize_crash=1 -runs=100000 `
    -exact_artifact_path=fuzz\artifacts\minimised .\fuzz\artifacts\mime_header_fuzzer\crash-<sha1>

4. Fix it in Common\Mime, and write a suite test if the bug is reachable over a protocol. Most of them are: a header value reaches the RFC 2047 decoder through IMAP FETCH ENVELOPE, a Content-Disposition filename reaches the parameter decoder through the attachment API, a nested multipart reaches the recursion through plain SMTP delivery. A corpus entry only proves the process no longer dies, only runs when somebody runs the fuzzer, and says nothing about the parser now doing the right thing. The regression suite runs on every release; the fuzzer does not.

5. Keep the input forever. Move the artifact into fuzz\regression\<target>\ with a name that says what it was, and commit it. Every run — including the seconds-long -Replay — re-executes it from then on. The rules are in fuzz\regression\README.md; the important one is that these files are byte-exact and marked binary in fuzz\.gitattributes, because a reproducer whose line endings got normalised still looks like a reproducer and no longer reproduces anything.

How the harness stays honest

Three decisions in the harness exist to stop it reporting things that are not bugs. They are worth knowing, because each one looks like a mistake until you know why:

• The input is copied and NUL-terminated before being handed to the parser. That is the production contract — File::ReadTextFile appends a NUL and LoadFromFile passes a length that excludes it — and MimeField::Load relies on it, reading one past the counted length in its folding loop. Handing libFuzzer's raw buffer straight in would report a heap overflow on nearly every input, all of them false.
• ASSERT is a no-op, matching Release. MimeBody::Load asserts that a multipart part has a non-empty boundary, which is one malformed message away; with asserts live, that would be the only finding you ever saw. The server's own HM_ASSERT (the lowercase assert sites were renamed to it on 5 September 2026) maps onto ASSERT in the shim, so -Asserts governs both spellings. The regression-suite counterpart is build\build.ps1 -Configuration Release -Asserts, where a violated assertion is reported as HM6364 rather than aborting, and the test that provoked it is the one that fails.
• The harness catches what production catches and nothing more. catch (...) in LoadFromFile means an escaping std::logic_error or std::bad_alloc is not a production crash, and letting it escape the target would call abort() and be reported as one. Memory errors are traps, not exceptions, so ASan still sees them first.

If a change to the harness starts producing large numbers of findings at once, suspect one of these three before believing the parser suddenly got worse.

What is not covered yet

• HTML, reached through the HTML-to-text conversion and message rewriting.
• iCalendar and vCard, reached through attachment handling.
• MimeBody::LoadFromFile's byte bookkeeping. The in-memory targets do not cover the body_byte_offset_ / body_byte_end_ arithmetic or the trailing-CRLF trim, which decide which bytes SaveAllToFile copies verbatim. Getting that wrong does not crash — it invalidates a DKIM body hash, which is arguably worse because nothing local notices. It needs File to serve bytes from memory; see the comment in fuzz\harness\fuzz_environment.cpp.
• Sieve, ManageSieve and the SMTP command parser. All three are untrusted input; none are wired to a target. The SMTP one is the most exposed.

Each of those is a new target next to the three that exist, not new infrastructure: the shim, the environment stubs and the build script are the part that was hard, and they are done.

Verified against the code

Checked 13 August 2026. Confirmed present and as described: /EHa (<ExceptionHandling>Async</ExceptionHandling>, both configurations in hMailServer.vcxproj) against the fuzz build's /EHsc; Common\Util\CrashOracle.{h,cpp}; MimeBody::LoadFromFile's catch (...) and its copy into Problematic messages; the three targets and the ten translation units build-fuzz.ps1 compiles; /MT as the default -RuntimeLibrary and the ASan DLL copied for both; _DISABLE_STRING_ANNOTATION / _DISABLE_VECTOR_ANNOTATION; Boost from %hMailServerLibs%\boost_1_92_0 or -BoostInclude; run-fuzz.ps1's -Target / -Minutes / -Jobs / -Replay / -Reproduce and -error_exitcode=77; kMaxTraversalDepth and hm_fuzz::ExerciseBody in fuzz_mime_common; mime_header_fuzzer's three shapes including Utilities::GetMimeHeader's truncated length; fuzz\.gitattributes marking regression/**, corpus/** and artifacts/** as -text -diff with regression/README.md put back to text.

One thing was stale and is now corrected in place: the BEncode example above was written in the present tense after the defect had been fixed. If you are updating this page, that is the failure mode to watch for — a document about finding bugs is the one most likely to keep describing them after they are gone.