Skip to content

Supported controllers

Tom-Bom-badil edited this page Sep 15, 2026 · 1 revision

The integration supports the SAMSON TROVIS 557x controller family as well as several compatible OEM controllers based on the same platforms.

Which devices and entities appear in Home Assistant depends not only on the controller model, but also on the hydronic system (aka system code number, Anlagenkennziffer) and the functions configured in the controller.

Note

Support means that the controller model and its documented hydronic configurations are known to the integration.

Not every supported model has already been tested on real hardware. The currently available test hardware is listed below.

SAMSON TROVIS controllers

Controller Rk1–Rk3 control circuits Rk4 / DHW Documented hydronic systems Test status
SAMSON TROVIS 5573 2 ✓ 29 Supported
SAMSON TROVIS 5573-1 2 ✓ 29 Supported
SAMSON TROVIS 5575 2 ✓ 33 Supported
SAMSON TROVIS 5576 2 ✓ 52 ✅ Live tested
SAMSON TROVIS 5578 3 ✓ 90 ✅ Live tested
SAMSON TROVIS 5578-E 3 ✓ 95 Supported
SAMSON TROVIS 5579 3 ✓ 85 ✅ Live tested

What do Rk1–Rk4 mean?

Rk is the abbreviation used by SAMSON for a control circuit (Regelkreis).

Rk1, Rk2 and Rk3 are technical controller slots. Depending on the selected hydronic system, they can be used as heating circuits, pre-control circuits or, in some configurations, as a buffer-tank circuit. Solar is handled separately.

Rk4 is reserved for domestic hot water (DHW). It is only shown in Home Assistant when the configured hydronic system actually uses it.

The number in the table therefore describes what the controller hardware can support - it does not mean that every installation will show all of these circuits.

➡️ Learn more about Rk1–Rk4 and your TROVIS configuration

Compatible OEM controllers

A number of controllers sold by other manufacturers have the same technical platform as the SAMSON TROVIS and use the same underlying controller technology. Currently these OEM models are known:

Controller TROVIS profile Rk1–Rk3 Rk4 / DHW Documented system configurations Notes
SAUTER EQJW126F001 TROVIS 5573 1 - 1 Rk1 and system 1.0 only
SAUTER EQJW146F001 TROVIS 5573 2 ✓ 29
SAUTER EQJW146F002 TROVIS 5573-1 2 ✓ 29
SAUTER EQJW246F002 TROVIS 5578 3 ✓ 90
SAUTER EQJW246F003 TROVIS 5578-E 3 ✓ 95
YADOS YADO|MATIC 01 TROVIS 5575 2 ✓ 33
YADOS YADO|MATIC 01-0003 TROVIS 5575 2 ✓ 33
YADOS YADO|MATIC 03 TROVIS 5573 2 ✓ 29
YADOS YADO|MATIC 03-1003 TROVIS 5573-1 2 ✓ 29
YADOS YADO|MATIC 08 TROVIS 5578 3 ✓ 90 TROVIS 5578-1114 platform
PEWO PCR06 TROVIS 5575 2 ✓ 33

Important

The OEM models above are supported based on the currently available technical documentation, but have not yet been verified on real hardware. If you own one of these controllers, your feedback would be especially useful!

➡️ Help us test another controller

Is the controller not listed?

There may be additional OEM controllers on the market that are based on a supported TROVIS platform.

If your controller is not listed here, please do not simply select another model because it looks similar. Open a discussion and provide:

  • manufacturer and exact model name,
  • a photo of the controller or type label if possible,
  • the available technical manual,
  • information about its Modbus interface.

➡️ Create a discussion

We can then check whether it maps safely to one of the supported TROVIS profiles.

german Wiki - Start english


english Bauanleitungen

Schritt 1 - Kabel

Schritt 2 - Adapter

Schritt 3 - Schnittstelle

Schritt 4 - Regler

Schritt 5 - Erster Test

🔥 Update: Weitere Adapter


english Home Assistant Integration

🚀 Getting started

🔌 Using the integration

🧑‍💻 Technical reference

🔢 Related projects


english SmartHomeNG Plugin


german2 Anhang: Info-Sammlung

Clone this wiki locally