Repository navigation
home

Note
Note as of 09/2026:
After being online and growing for several years,
this Repo and its Wiki are currently undergoing a major revision.
You can expect broken links and moved files until the revision is finished.
Hinweis, Stand 09/2026:
Nachdem dieses Wiki viele Jahre online war und gewachsen ist,
unterliegt es nun einer gründlichen Überarbeitung.
Mit kaputten Links / verschobenen Dateien ist bis zum Ende der Überarbeitung zu rechnen.
DE Wozu dieses Projekt? |
EN What is this project about? |
|---|---|
|
Diese Reise begann 2014 auf der Suche nach tiefergehenden Informationen über meinen Pewo PCR06 Heizungsregler. Mein Ziel war das Lesen und Visualisieren der eingestellten Parameter sowie der Betriebsdaten in meinem damaligen Python-basierten SmartHomeNG Home Automation System.
Heute wird die Software für meine mittlerweile getauschte 5576-0003 entwickelt und auf meiner „Bastelstrecke“ (5578 + 5579) sowohl mit Modbus/TCP als auch Modbus/RTU getestet. Sie ist auf allen Modellen mit Modbus-Schnittstelle lauffähig (5571, 5573(-1),5575, 5576, 5578(-E)). Hinweis: Soll eine 5575 / ein Pewo PCR-06 angebunden werden, bitte diesen Hinweis beachten. Danke an @edomi-fan, der nach mehreren Jahren das Geheimnis dieses Modells endlich lüften konnte! Dieses Wiki soll weiterhin der Zusammenfassung von allen möglichen Informationen zu den verschiedenen Modellen sowie ihrer Anbindung dienen und gleichzeitig den Einstieg in das Thema „Modbus“ erleichtern (siehe Kapitel im Anhang). Das Wiki wurde über viele Jahre (bis ca. Mitte 2026) ausschließlich auf Deutsch geführt. Da im Rahmen von Umstellungen im Home Assistant Core (
SmartHomeNG / SmartVISU, 2017 |
This journey began in 2014 when I was looking for more detailed information about my Pewo PCR06 heating controller. My goal was to read and visualize its configuration parameters and operating data in my Python-based SmartHomeNG home automation system I was using at the time.
Today I develop the software for my TROVIS 5576-0003, which has replaced the original controller, and is tested on my dev setup (5578 + 5579) using both Modbus/TCP and Modbus/RTU. It runs on all models equipped with a Modbus interface (5571, 5573(-1),5575, 5576, 5578(-E)). Note: If you want to connect a 5575 / Pewo PCR-06, please read this note. Many thanks to @edomi-fan, who finally managed to uncover the secret of this model after several years of tinkering! This wiki is intended to also serve as a collection of information about the various controller models and how to connect them, while also providing an introduction to Modbus for readers who are new to the subject (see the chapters in the appendix). For many years (until around mid-2026), this wiki was maintained exclusively in German. However, when TROVIS was used as the first reference and example project for changes in Home Assistant Core (
HomeAssistant (YAML-config), 2025 |
DE Wie funktioniert das?
|
EN How does it work?
|
|---|---|
|
Grundsätzlich verfügen die Regler -je nach Modell- über verschiedene Schnittstellen:
In diesem Projekt wird der Systembus verwendet, um über Modbus sogenannte Register (16-Bit-Speicherplätze, engl. Parameters → PA1..n) und Schalter (Einzelbits, engl. Coils → CO1..n) mit den vorhandenen Einstellungen und Betriebswerten in regelmäßigen Intervallen auszulesen. Das Projekt besteht demzufolge aus zwei Teilen:
|
Depending on the model, the controllers provide several different interfaces:
In this project, the system bus is used to periodically read the controller's current settings and operating values via Modbus. These are stored in so-called registers (16-bit memory locations, referred to as Parameters → PA1..n) and coils (individual bits → CO1..n). Accordingly, the project consists of two main parts:
|
DE Was wird benötigt, und was kostet das?
|
EN What's required, and how much is it?
|
|---|---|
|
Um eine Kommunikation mit dem Regler aufzubauen, wird Folgendes benötigt:
Wenn man irgendwo also noch ein altes Netzwerk- oder Telefonkabel herumliegen hat, liegen die Kosten mit einem günstigen USB-Adapter unter 10 Euro; mit einem LAN-Adapter etwas höher bei ca. 20–40 Euro (je nach verwendetem Adapter). |
To establish communication with the controller, the following components are required:
So, if you already have an old network or telephone cable lying around, the total cost can be less than €10 when using an inexpensive USB adapter. With a LAN adapter, the cost is somewhat higher at around €20–40, depending on the adapter used. |
Disclaimer: Any information on this wiki is informal advice only. It is not supported nor endorsed by Samson, Sauter, YADOS, Pewo or any other equipment maker or OEM. There is no warranty expressed or implied: you take sole responsibility for everything you do with your heating controller.
-
Wozu dieses Projekt?
What is this project about?
-
Wie funktioniert das?
How does it work?
- Was wird benötigt? Kosten?
What's required? Costs?
- Supported controllers
- Connecting your TROVIS
- Installation and setup
- Current limits and migration
- Troubleshooting
- Architecture and internals
- Connections and transports
- Config flow and reconfiguration
- Coordinator and runtime updates
- Devices and entities
- Writing and write access
- Development and testing
- LAN/WLAN
USR-TCP232-T2, USR-TCP232-410S, USR-K7, USR-DR301 (Hutschiene), Elfin-EE10 (WLAN) - USB
AZDelivery FT232RL, Waveshare USB 2 RS232/485/TTL - ESP
ESP-01, Wemos D1 - SPS
S7 1200, Wago 750-889 - KNX
Masifi Modbus Gateway
- Edomi
- espHome/HomeAssitant
- FHEM
- HomeAssistant
- ioBroker
- KNX
- Loxone
- NodeRed
- openHAB
- SIMATIC Step7
- smarthomeNG
- Tasmota/MQTT
- Wago CODESYS