Ultimate CAN Scanner v0.2.1

Windows x64 self-contained single-file build of Ultimate CAN Scanner — one .exe,
no .NET runtime install required.

Adapter backends: Ixxat VCI4, OBDX Pro (USB/WiFi/BLE), and any generic SAE J2534
PassThru device (loaded from the installed vendor DLL).

New in v0.2.1

Transmit

• Rolling / alive counters — tick Roll on a TX-list entry (auto-ticked for
  counter-named signals) to send it as a rolling counter: every transmitted frame increments
  it and it wraps at the DBC min/max. Queue the counter alongside the message's data signals
  and Repeat All.
• Live value edits while repeating — editing the raw data box, the DBC signal value, or a
  TX-list entry now updates the running cyclic stream in place (no stop/start).

Live Gauges

• Deselect individual signals within an enabled CAN ID (not just all-or-nothing per ID).
• Blank gauges when stale switch — clear a gauge to "—" when its message stops arriving
  (~1.5 s) instead of holding the last value (off by default).

Filter

• The CAN ID filter (v0.2.0) now also gates log replay — filtered-out IDs aren't
  transmitted onto the bus / broadcast over TCP, not just hidden from the trace grid.

Install / run

1. Download UltimateCanScanner.exe.
2. Run it — no unzip, no install.

Notes: 64-bit only — 32-bit J2534 drivers are listed but not loadable. The Ixxat backend
needs the HMS Ixxat VCI driver installed; the J2534 backend needs the vendor's 64-bit PassThru
driver installed. First launch may take a moment as the single-file bundle self-extracts.