Ultimate CAN Scanner v0.2.5

Windows x64 self-contained build of Ultimate CAN Scanner — no .NET runtime install required.

This release is a ZIP, not a single .exe. It bundles a small 32-bit helper for the Tactrix
J2534 bridge (see below), which has to sit in a j2534host folder beside the app. Unzip the whole
folder and keep it together.

New in v0.2.5

• Tactrix OpenPort 2.0 support (J2534). Tactrix ships only a 32-bit PassThru driver
  (op20pt32.dll), which this 64-bit app can't load directly. It now reaches it through a bundled
  32-bit bridge host: pick the J2534 adapter, choose OpenPort 2.0, and connect — RX/TX,
  decode and gauges work as with any backend. Any other 32-bit-only J2534 driver works the same way;
  64-bit J2534 drivers still run in-process. The device list shows each driver's mode
  (e.g. op20pt32.dll — 32-bit (via bridge)).
• Live Gauges: "only signals with data in log". A new gauge-panel checkbox hides CAN IDs and
  signals that have no data in the loaded log, so the checklist and gauges show only what the capture
  actually contains. Requires a log loaded; off by default.

Adapter backends

Ixxat VCI4, OBDX Pro (USB/WiFi/BLE), any generic SAE J2534 PassThru device (64-bit in-process
or 32-bit via the bridge), and GVRET / ESP32RET (USB serial or WiFi TCP).

Install / run

1. Download UltimateCanScanner-win-x64.zip and unzip it.
2. Run UltimateCanScanner.exe from the unzipped folder — keep the j2534host folder next to it
   (only needed for 32-bit J2534 drivers like Tactrix; harmless otherwise).

Notes: 64-bit only. The Ixxat backend needs the HMS Ixxat VCI driver; J2534 backends need the
vendor's PassThru driver installed (Tactrix: the OpenPort 2.0 drivers).