Version 51C

Version 51C - Support new Firmware & Multi Sources. Both works for New TCP and UDP Tally Protocol. for Windows (Mac & Linux Coming Soon)

Version 4.9c - Now With SuperSources

Version 4.9c - Now With SuperSources with fully working TCP Protocol and UDP Tally Protocol and fix bug (PVW still2 doesnt work before)

Version 4.9a

New Improvement TCP / UDP Protocol
Now responds to "handshake" protocol from Clients (software control)
Adding Transition Type (dip, wipe, mix)

Version 4.7a (UDP Integrated)

Version 4.7a
Now support UDP Tally Protocol for experimental use.
Check the "Bind Client UDP" to get continuosly packet from Switcher (emulator)
Uncheck to get the UDP packet by request ( send repeatly by manual)

Available For Windows And Mac. Linux coming soon!

You can try the tally protocol by using tes_tally_osee_udp.bin and upload it to your esp8266 nodemcu or similar board.
Add the Red Led vcc on pin 12 and Green led vcc on Pin 14. All leds GND = GND board pin.

After upload, search and connect to the ESP Access point "OseeTallyLight", with the ssid password "oseegostream".
Then open your smartphone and browse the ip 192.168.4.1 to access the setup webmenu.
Enter your WiFi ssid, password, select your desired tally number and Switcher ip address ( make sure the switcher are connected on the same wifi network's lan port)
save and restart to boot the new configuration, done!

you can follow step by step how to upload to your board here:
https://github.com/VQey/OseeGoController

First Release Version

Final Version:
4th release Windows Version - Updating TCP Connection
3rd Release MaxOS Version - Updating TCP Connection
3rd Release Linux Version - Updating TCP Connection

Added:
Client List
Cut - Auto - Loop Sequence
Go Stream Monitor (by János Szücs - Great man!) now support