Skip to content

Version 4.7a (UDP Integrated)

Choose a tag to compare

View all tags
@VQey VQey released this 02 Apr 04:01
· 9 commits to main since this release
OseeEmu
31d651e
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

Version 4.7a
Now support UDP Tally Protocol for experimental use.
Check the "Bind Client UDP" to get continuosly packet from Switcher (emulator)
Uncheck to get the UDP packet by request ( send repeatly by manual)

Available For Windows And Mac. Linux coming soon!

You can try the tally protocol by using tes_tally_osee_udp.bin and upload it to your esp8266 nodemcu or similar board.
Add the Red Led vcc on pin 12 and Green led vcc on Pin 14. All leds GND = GND board pin.

After upload, search and connect to the ESP Access point "OseeTallyLight", with the ssid password "oseegostream".
Then open your smartphone and browse the ip 192.168.4.1 to access the setup webmenu.
Enter your WiFi ssid, password, select your desired tally number and Switcher ip address ( make sure the switcher are connected on the same wifi network's lan port)
save and restart to boot the new configuration, done!

you can follow step by step how to upload to your board here:
https://github.com/VQey/OseeGoController

Assets 5
Loading