-
Notifications
You must be signed in to change notification settings - Fork 41
Supported Hardware
With WebThings, Mozilla aims to create interoperability and user choice on the Internet of Things. Mozilla does not endorse any particular smart home product or brand, but here are the devices and protocols which have been tested so far with the WebThings Gateway.
Note: This list is far from complete. There are many more devices which are compatible which have not been added to this list by developers or users.
- Raspberry Pi 1 Model B
- Raspberry Pi 1 Model B+
- Raspberry Pi 2 Model B
- Raspberry Pi 3 Model B (RPi 3 models recommended)
- Raspberry Pi 3 Model B+
- Raspberry Pi 3 Model A+
- Raspberry Pi 4 Model B
- Raspberry Pi Zero W
- Digi XStick2 (XU-Z11) - link1, link2
- ConBee Zigbee USB stick
- ConBee II Zigbee USB stick
- iTead Zigbee USB stick ($4)
- Zwave.me UZB Stick
- Aeotec Z-Stick (Gen5) - note the Z-Stick Gen 5 isn't recognized when plugged in directly to the Raspberry Pi 4. Some hubs seem to allow it to work. In particular, it works for me using this one as an unpowered hub.
- Zooz S2 USB Stick
- Any OpenZWave compatible dongle should work, but have not all been tested
Note: Additional adapters can be supported via add-ons, which are being added all the time.
- Cree Bulbs
- Develco Motion Sensor
- Develco Window Sensor
- GE ZB4101 - On/Off Light and Small Appliance Module
- GE ZB3101 - Dimmer Lamp Module
- IKEA TRÅDFRI Bulbs
- IKEA TRÅDFRI Wireless Control Outlet
- IKEA TRÅDFRI Dimmer button
- INNR Smart Bulb Colour - RB 285 C
- INNR Smart Bulb Comfort - RB 278 T
- INNR Smart filament Bulb white - RF 265
- Keen Smart Vents
- LUPUS Small Zigbee Temperature Sensor
- Müller-Licht tint white+color Candle
- OSRAM Smart+ Plug EU
- OSRAM Lightify Tunable White Bulb (73674)
- OSRAM Outdoor Flex Multicolor
- Philips Hue Bulbs (requires a remote to factory reset)
- Sengled Zigbee Bulbs
- SmartThings Power Outlet (UK & US)
- SmartThings Multipurpose Sensor
- SmartThings Multipurpose Sensor (2016)
- SmartThings Motion Sensor
- SmartThings Motion Sensor (2016)
- SmartThings Water Leak Sensor
- SmartThings Button
- Sylvania SMART+ Smart Plug 729222-A
- Sylvania SMART+ ZigBee 2 Button Dimming Switch
- Sylvania SMART+ Adjustable White Bulb (71831)
- Yale YRD226 Deadbolt (Zigbee)
- Cheap Zigbee On/Off Controller From eBay
- Nue Smart ZigBee Light Dimmer Switch Model HGZB-01A
- GLEDOPTO RGB + CCT LED Controller
- Zen Thermostat
- Centralite HA 3156105 Thermostat (Zigbee)
- SAGE doorbell sensor
- D-Link Smart Door/Window Sensor (DCH-B112)
- Sonoff Zigbee DIY Smart Switch- BASICZBR3
- Many other Zigbee smart plugs, sensors, switches and bulbs using the Home Automation profile should also work. Please add devices you have tested to this wiki page.
The following Xiaomi devices have been seen working, but most of the battery powered Xiaomi devices do not follow the Zigbee spec, and may or may not work reliably. Some devices will work for a while after paired, but then stop working. This may depend on the other "router" devices found on the Zigbee network. Apparently, Xiaomi is addressing this and some newer devices are Zigbee 3.0 compliant. See: https://community.smartthings.com/t/original-aqara-xiaomi-zigbee-sensors-contact-temp-motion-button-outlet-leak-etc/113253/1103
- Xiaomi Aqara WSDCGQ11LM temperature/pressure/humidity (square) (lumi.weather)
- Xiaomi MCCGQ01LM door and window sensor (lumi.sensor_magnet)
- Xiaomi WXKG01LM Smart Wireless Switch (lumi.sensor_switch)
- Xiaomi RTCGQ01LM IR Motion Sensor (lumi.sensor_motion)
- Xiaomi RTCGQ11LM IR Motion Sensor (lumi.sensor_motion.aq2)
- Xiaomi RTCGQ01LM (round) (lumi.sensor_ht)
- Aeotec Smart Switch 6
- Aeotec Smart Dimmer 6
- Devolo Smartmetering Plug
- Fibaro Wall Plug 2 FGWPF-102-ZW5
- GE ZW4103 - Plug-in Smart Switch
- GE 12730 - Fan Control In-Wall Switch
- GoControl Z-Wave Bulb
- Heiman Smoke Sensor HS1SA-Z
- Inovelli NZW31 Dimmer Switch + Repeater
- Inovelli NZW37 2 Channel Dual Smart Plug Only channel 1 is detected
- Inovelli OM71V 1 Channel Smart Plug - Outdoor Rated
- Leviton VRPA1 - Plug-in Outlet Module The VRPA1 apepars to have been superceded by the DZPA1.
- Neo Coolcam smart power Plug
- Neo Coolcam motion sensor 2 - Motion, temperature and lux,
- Neo Coolcam water sensor
- Spetu water/natural gas valve switch
- Honeywell TH8320ZW1000 Thermostat
- Yale YRD110 Deabbolt (ZWave)
- ZLINK Plug-In Appliance Module ZL-PA-100
- Many other Z-wave smart plugs, sensors, switches and bulbs should also work. Please add devices you have tested to this wiki page.
- Etekcity
- Eufy
- Foscam
- Foscam R2 IP camera (supports ONVIF)
- LG
- LIFX
- Logitech
- Meross
- Nanoleaf
- Netatmo
- Philips Hue
- Bulbs -- using Zigbee to Wi-Fi bridge
- Indoor motion sensor -- shows up as three devices
- Dimmer switch
- Roku
- Sengled
- Sonos
- TP-Link
- Wemo
- Yeelight
- Flic Buttons
- See HomeKit and Other below
Most Wi-Fi and BLE devices should work. Below is a list of tested devices.
Note: Devices typically need to be unpaired from iOS (or their Android app) before using them with the gateway.
- Smart plugs
- iDevices Switch
- Koogeek P1 - Note that this is the US/EU version supported by "Homekit" Adapter
- Eve Energy
- Bridges
- Light bulbs
- Sensors
- Buttons
- Koogeek KLUP1 The UK version after flashing with Tasmota supported by the Tasmota Adapter
- Arlec Smart Plug PC190HA (AU) -Instructions
- Raspberry Pi GPIO
- Raspberry Pi I2C
- Wi-Fi developer hardware
- Bluetooth developer hardware
- Nordic nRF52 Developer Kit, Thingy52, ...
- Nordic nRF51 BBC micro:bit (using MicroBlocks VM on board connecting to MicroBlocks add-on on gw)
- Arduino (Mega256 + [STM32] boards)
- Microblocks
- Serial devices
- Pimoroni Blinkt!
- X10