Skip to content

Model 2

unknown edited this page Nov 10, 2026 · 3 revisions

Setup

  • Download and unzip latest version of nebula Model2 Emulator (v1.1a)

  • Edit the file EMULATOR.INI to change your graphic preferences (resolution, fullscreen, etc...)

  • Open U-Shoot.exe, and select the wanted game in the GUI :

    Select the Model2 Emulator to run. Both EMULATOR.EXE and emulator_multicpu.exe are supported

    Set specific game options if needed (see Available Options)

  • Start the game, either by the GUI button or directly with a command line (see U-Shoot command line parameter

  • Some games need proper calibration the first time you run them (see Controls)

Available Options

  • X Scaling : Change Axis X scalling computing
  • NoInputs : Disable all inputs mods if checked, keeping only outputs available

Controls

U-Shoot is trying to pre-calibrate the games so that your guns will always be correctly aligned with the aim. But some of the games couldn't be patched that way. In that case, go into TEST mode and proceed to gun calibration.

⚠️ Emulator need to be closed via Emulator> Exit menu in order to properly save calibration data to NVRAM

Game Title Command
Behind Enemy Lines Calibration Needed
Gunblade New-York Calibration Needed
Rail Chase 2 No Calibration Available
The House of the Dead Calibration Needed
Virtua Cop Calibration OK
Virtua Cop 2 Calibration OK

Crosshairs and white-flash removal

When using U-Shoot, genuine crosshair will be removed as they won't be in line with the aim.
To use custom crosshairs, use the m2emulator button in the GUI to install some scripts allowing to switch crosshair visibility.

White-flash removal scripts can also be installed if needed.

Savefile location

Emulated game data (TEST MENU changes, etc..) are located in the NVDATA directory inside the emulator main folder

U-Shoot command line parameters

Game Title Command
Behind Enemy Lines -game=M2_Bel.xml
Gunblade New-York -game=M2_GunbladeNY.xml
Rail Chase 2 -game=M2_RailChase2.xml
The House of the Dead -game=M2_Hotd.xml
Virtua Cop -game=M2_Vcop.xml
Virtua Cop 2 -game=M2_Vcop2.xml

Notes

  • When using U-Shoot, all emulator controls for these games will be replaced by the ones from U-Shoot settings. This includes TEST, COIN, etc...
  • To use native Emulator input system and just fetch outputs with U-Shoot, check the NoInputs option in the game configuration
  • Rail Chase 2 aim will be off...and the game has no gun calibration option
  • Native outputs from Behind Enemy Lines (gun motor, lamps) are not available

Main program Wiki :



Game specific wiki :


Clone this wiki locally