Skip to content

Outputs Settings

unknown edited this page Nov 10, 2026 · 1 revision

If the option is enabled, U-Shoot will retrieve and send out the game outputs status in order to command various lamp, motors, recoils etc....

To do so, it will behave just like MAME and data can be used to control LEDs/Motors thanks to one of the following software (please contact me if some are missing from the list) :

N.B:
This wiki will not cover how to use and configure those programs.
Tutorials are already available for Mame Hooker and Hook of the Reaper

All changes are saved into the /UserData/Config.xml file.

MAME-Type Outputs

Option Description
Disabled No outputs will be fetched and no output service (TCP or WM) will be running
Window Message Outputs Sends Outputs data by using old MAME / Mame Hooker way. Also work with OutputHooker
Network Outputs Sends Outputs data via a TCP network, much more modern way of doing thing
Can work with QMameHook, Hook of the Reaper and OutputHooker

Outputs timings

Delay between output refresh

This is how often U-Shoot will try to read the needed values into the game memory. 1 Millisecond beeing the lowest value possible, though the timing might not be respected by the OS because Windows is not a Real-Time system, an should not cause any load issue on most modern CPUs.

Lenght of custom [damage] generated output

This is how long the output signal will stay on if a player is hit. So how long the vibration/flash/light will be happening.

Lenght of custom [recoil] generated output

Depending on the lightgun feedback hardware (and software way of controlling it), tweaking these values will change how powerfull/fast the solenoid will act :

  • ON State pulse lenght : Higher values will result in stronger feedback, but the coil may heat faster.
  • OFF State pulse lenght : Mainly use for machinegun-like weapons. Lower values will result in quicker feedbacks, but if the value is not high enough, the coil may not be able to get back completely to it's previous state when a new pulse will come, and will seem to be stuck activated.

⚠️
Some lightguns (like Gun4IR) have a pulse-controlled solenoid, meaning the timings need to be set directly with the lightgun control system. In that case, lower DemulShooter ON/OFF states lenght as it will not directly control the solenoid directly - and can even mess with the proprietary control system.

Main program Wiki :



Game specific wiki :


Clone this wiki locally