Repository navigation
Settings
blacksheep8732 edited this page Sep 18, 2026
·
2 revisions
Every setting on the Settings page – with its default. Number fields are checked when saving; an invalid value is not stored and "Invalid value, not saved: …" appears at the top.
| Field | Default | Meaning |
|---|---|---|
| Backup interval (hours) | 24 |
how old a device's last backup may get before a new one is taken automatically (1–8760) |
| Keep max backups / device | 0 |
keep only the newest n backups, 0 = all |
| Delete older than days | 0 |
delete older backups, 0 = never |
| Field | Default | Meaning |
|---|---|---|
| Enable auto-update globally | off | master switch. The device's own Auto-update must be on as well → Firmware Updates |
| Field | Default | Meaning |
|---|---|---|
| Default scan subnet | (empty) | pre-filled range for Scan subnet, e.g. 192.168.178.1/24; empty = 192.168.178.1/24
|
| Field | Default | Meaning |
|---|---|---|
| Check interval (minutes) | 5 |
how often all devices are queried (online status, version, clock). 0 disables it – status is then only updated during backups. Takes effect immediately, no restart. |
| Field | Default | Meaning |
|---|---|---|
| Target URL | (empty) | ntfy topic, Gotify address or webhook; empty = event log only |
| Format | ntfy |
ntfy, Gotify or JSON-Webhook
|
| Notify from level | Warning | lower levels are not sent |
| Keep events (days) | 30 |
delete older event log entries, 0 = never |
Details: Notifications
| Field | Default | Meaning |
|---|---|---|
| Broker host | (empty) | address of the MQTT broker; only then MQTT scan appears |
| Broker port | 1883 |
|
| Username / Password | (empty) | broker login. The password is stored encrypted and never shown again: leave empty = kept, Clear password = removed |
| Group topic | tasmotas |
your devices' group topic; with tasmotas the legacy sonoffs is asked too |
| Auto-scan before scheduled backup | off | look for new devices via MQTT before every automatic backup run |
| Field | Default | Meaning |
|---|---|---|
| Language | German | interface language |
| Timezone | Europe/Berlin |
for all displayed times, backup file names and the time zone sync |
| Theme | auto | light, dark or follow the operating system |
| New admin password | – | leave empty = keep the current password |