Cruiser 5.1.0 (Beta) #671
Replies: 37 comments 78 replies
-
|
With all these new panel options and the fact, that winter is starting and "real navigation" is limited to (I assume) just a few users: do you see a chance to display all the panels configured to be shown during "Navigation" also for the simulation use case @devemux86? Right now, after selecting "Simulate navigation" all panels are hidden except for these: 
|
Beta Was this translation helpful? Give feedback.
-
|
Most features can also be tested with the "Walking" or other profile. |
Beta Was this translation helpful? Give feedback.
-
|
This means "No", right? 😉 |
Beta Was this translation helpful? Give feedback.
-
|
Correctly, simulation is just a special view of navigation, |
Beta Was this translation helpful? Give feedback.
-
|
@devemux86 I am planning to have vacation in January and February and to do some trips during that time. Might it be interesting that I install that beta and test? You know that I am not driving a motorbike, but a car... |
Beta Was this translation helpful? Give feedback.
-
|
@Maverikk65 You can install the Beta over the current version. |
Beta Was this translation helpful? Give feedback.
-
|
Multi-route GPX (from BaseCamp) working nicely 🕺 |
Beta Was this translation helpful? Give feedback.
-
|
@MotoUKRider Thanks for the feedback. This is the new rewritten "Import" process, let's see what you all think of it. |
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b2 is available:
|
Beta Was this translation helpful? Give feedback.
-
|
Do I really have to hit "Record" now three times, when I start a route and e.g. want 1) GPS, 2) Trip A and 3) Trip B to start counting? And also three times again if I want to stop? Am I the only one who finds this super uncomfortable? Or am I maybe the only one who hasn't understood how all these panels are supposed to work now!?? 🤔 |
Beta Was this translation helpful? Give feedback.
-
|
(this is mentioned in the "Travel time" announcement) Auto recording of all panels in navigation / follow still exists, but is set separately from visibility:
|
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
When calculating routes online with GRAPHOPPER and Open Route Service, the following happens:
There are no problems with OSRM and Valhalla. |
Beta Was this translation helpful? Give feedback.
-
|
Only CycleStreets and OSRM do not support no-go areas. |
Beta Was this translation helpful? Give feedback.
-
|
By the way, a quick question: shouldn't no-go areas be in the collection "Tracks / Areas"? Even by name it fits better here than to points (Favorites). I know it's a point with a radius, but... that's the definition of area 😃 |
Beta Was this translation helpful? Give feedback.
-
|
These are points like the favorites, so they belong to same category. This should also cover most cases and calculates much faster the routes compared to no-go polygons. |
Beta Was this translation helpful? Give feedback.
-
|
Maybe we could name the other category to "Tracks / Polygons". Or revert to its old name "Tracks". |
Beta Was this translation helpful? Give feedback.
-
|
@devemux86 Whatever you call it, the most important thing is that we have no-go and it works perfectly. Thanks for that 👍 |
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b3 is available:
|
Beta Was this translation helpful? Give feedback.
-
|
Thanks a lot for bringing back the speed recording. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Why do you blame Cruiser (and Emux as well) again and again??? 2D view is NOT horrible. You made the proposal to re-introduce 3D. Okay, then please wait or enter the Mapsforge community in order to push the development. But please stop flooding this forum with your inappropriate opinion. Thanks. Edit: Okay, you have deleted your post... |
Beta Was this translation helpful? Give feedback.
-
|
I can't find any accusations in GSArider's post. It's just an opinion that you can simply let stand in a democracy. You don't have to share it. I also sorely miss 3D in V5, but I still want development to continue. The good thing is that you can use both versions, V4 and V5 on different smart phones. I can live with that. |
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b4 is available:
|
Beta Was this translation helpful? Give feedback.
-
|
The menu after tapping the distance/time panel in Polish should be different: If you decide to use the "Start/Stop" naming, you won't have to translate it into Polish, because it's the same 😁 |
Beta Was this translation helpful? Give feedback.
-
|
@Ciutnik Thanks for the translations. Before changing any English texts, I want first to finish the Chinese language by @Ptckh. |
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b5 is available:
|
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b6 is available:
|
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b7 is available:
|
Beta Was this translation helpful? Give feedback.
-
|
@Ciutnik Thanks, I will change the translation. |
Beta Was this translation helpful? Give feedback.
-
|
After installing this update the panel order is lost. It happened with some previous updates as well. Bug or feature? 😉 |
Beta Was this translation helpful? Give feedback.
-
|
@kds112 It is needed when we add / remove panels. 🙂 |
Beta Was this translation helpful? Give feedback.
-
|
I tried to reorder the panels but after saving nothing happened, the order stayed unchanged...? |
Beta Was this translation helpful? Give feedback.
-
|
@kds112 Thanks, it will work properly in the next update. |
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b8 is available:
|
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b9 is available:
|
Beta Was this translation helpful? Give feedback.
-
|
Hi,
What format does this HGT support, why do I use a 1 arc second .hgt file
made by myself, I can't recognize it
…On Sat, 23 Nov 2024 at 21:13, Emux ***@***.***> wrote:
Cruiser 5.1.0-b9 is available
<https://www.dropbox.com/scl/fo/0pi1svwz14rl49l2gldqr/ANVb1vCX3ezM-cuXr532fFY?rlkey=3lt3t50tinxdsdkfz0py1t4ec&st=e2snb8iu&dl=0>
:
- Various improvements
—
Reply to this email directly, view it on GitHub
<#671 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BFKDQI4I7WWXZK3MJD4PGP32CB5PJAVCNFSM6AAAAABRWKH45KVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMZVG4YTGMI>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
@Ptckh Maybe it's easier to first test other hillshading data with desktop Cruiser via menu "Map | Open HGT". |
Beta Was this translation helpful? Give feedback.
-
|
We use hillshading data 3" available on our Mapsforge download server. 3" data exist for the whole world and should be sufficient and fast for most cases. To use other hgt data, you can clear the "hgt2" dir in Cruiser storage folder and put there your hgt files. |
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b11 is available:
|
Beta Was this translation helpful? Give feedback.
-
|
Hello!! I'm developing a renderstheme, I would like to check if it works in Cruiser but when I go to the theme settings window the app closes,both the official version and in Beta . In Oruxmaps and Locus Maps it works Correct .I leave here the link to my blog where it can be downloaded, when possible please let me know what I need to correct.Thank you |
Beta Was this translation helpful? Give feedback.
-
|
@troNpo Thanks for the report and the map theme! Desktop Cruiser does not close, but does not open the layers screen. It is better to use an xml editor that has xml validation, it warns you when xml is not correct. The map theme has an error, so this is the cause of the problems.
Also when xml has empty body, close it properly, instead of |
Beta Was this translation helpful? Give feedback.
-
|
@troNpo If you run desktop Cruiser on the command line, it warns you about errors in the theme: You can run desktop Cruiser on the command line with: |
Beta Was this translation helpful? Give feedback.
-
|
Thank you! Once the errors indicated have been corrected, it works correctly.Unfortunately my resources to develop themes are very limited, I only have an Android phone, a code editor and the map apps to verify the results.I use this website to format and detect errors in the xml https://appdevtools.com/xml-formatter |
Beta Was this translation helpful? Give feedback.
-
|
@troNpo About the hill shading in the layers menu, I reverted this change. As no theme uses it, you can also avoid it so it is the same as other themes. |
Beta Was this translation helpful? Give feedback.
-
|
Well it will be the best, Because the result is not the expected one, it does not work as a switch for the shading layer, what it does is amplify the magnitude of the existing hat. |
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b12 is available:
|
Beta Was this translation helpful? Give feedback.
-
|
What about a new release or new features to come first? 🙃 |
Beta Was this translation helpful? Give feedback.
-
|
@kds112 If everything is ok, a new release will probably be made soon. |
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b13 is available:
|
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b14 is available:
|
Beta Was this translation helpful? Give feedback.
-
|
This means that if I zoom out while driving, all the poi's will remain visible, no matter what zoom level?
|
Beta Was this translation helpful? Give feedback.
-
|
Wow! Many thanks. Emus @devemux86 you are genius! I installed the new version right now and will drive 450km later today in the evening... (mostly autobahn of course, but also 1 hour on the roads...). For me it is very good that it does not rotate --- I already had some situations where I got disoriented in Copilot when I zoomed out to much and a little bump gave me an additional rotation and I got totally lost... ;-) Thankfully I am not flying, only driving... |
Beta Was this translation helpful? Give feedback.
-
|
@umpfmpf We must give priority first to stability and performance. If want to examine the map, pause navigation and everything works as before. |
Beta Was this translation helpful? Give feedback.
-
|
@0709wiwiwi |
Beta Was this translation helpful? Give feedback.
-
|
@umpfmpf Displaying a large number of favorites could be useful in route planning when browsing the map. To use nearby favorites in navigation (like fuel stations), it is better to hide them and select "Use in navigation". |
Beta Was this translation helpful? Give feedback.
-
|
Will you release a 5.1 version or will you go directly to 5.2 beta? 5.2 was already announced several times... |
Beta Was this translation helpful? Give feedback.
-
|
Development of new features does not stop! 🙂 5.1 will be released, then 5.2 will be Beta for testing. |
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b15 is available:
|
Beta Was this translation helpful? Give feedback.
-
|
hi,
[image: da9217bbee1fc0ed778b809abad7fd2c.png]
…On Mon, 9 Dec 2024 at 16:45, Emux ***@***.***> wrote:
Cruiser 5.1.0-b15 is available
<https://www.dropbox.com/scl/fo/0pi1svwz14rl49l2gldqr/ANVb1vCX3ezM-cuXr532fFY?rlkey=3lt3t50tinxdsdkfz0py1t4ec&st=e2snb8iu&dl=0>
:
- Various improvements
—
Reply to this email directly, view it on GitHub
<#671 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BFKDQI764ZLUGH2GR52Z2UL2EVKCFAVCNFSM6AAAAABRWKH45KVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNJQGU2DCMA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
@Ptckh Please use the browser to attach screenshots. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, See the attachment please.
…On Mon, 9 Dec 2024 at 21:29, Emux ***@***.***> wrote:
@Ptckh <https://github.com/Ptckh> Please use the browser to attach
screenshots.
—
Reply to this email directly, view it on GitHub
<#671 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BFKDQIZ6FPDURGW34D3DL5L2EWLNJAVCNFSM6AAAAABRWKH45KVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNJQHA2DGNQ>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
@Ptckh There is no attachment. Also please write details about what you report. |
Beta Was this translation helpful? Give feedback.
-
|
There's a garbled code. |
Beta Was this translation helpful? Give feedback.
-
|
@Ptckh It works here on Linux with OpenJDK 17. What Java do you use? Try OpenJDK from here. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, I configured JDK8 and now I'm switching to JDK21 |
Beta Was this translation helpful? Give feedback.
-
|
When planning bicycle routes (built-in bike profile), I use BRouter offline, but there are no alternatives offered. Was it always like this? I have it set to 2 alternatives. |
Beta Was this translation helpful? Give feedback.
-
|
It really is so! I didn't think to check this on other profiles... 🙂 |
Beta Was this translation helpful? Give feedback.
-
|
@Ciutnik This could be because of the latest BRouter code. I informed @afischerdev here: |
Beta Was this translation helpful? Give feedback.
-
|
@devemux86 Thanks for reporting the issue to the BRouter developers. I hope they fix it quickly. |
Beta Was this translation helpful? Give feedback.
-
|
This is fixed by @afischerdev in BRouter and will be included in the next Cruiser update. @Ciutnik Thanks again for the report! 👍 |
Beta Was this translation helpful? Give feedback.
-
|
I would like to thank both of you gentlemen @devemux86 & @afischerdev for the quick fix 🙂👍 |
Beta Was this translation helpful? Give feedback.
-
Cruiser 5.1.0-b16 is available:
|
Beta Was this translation helpful? Give feedback.
-
|
Hi, I'm using cruiser,OSRM to intelligently plan a route and I'm finding that there is a lack of elevation information so that there is no way to calculate the cumulative ascent and descent, is it possible to add the elevation? Thanks.
…---- Replied Message ----
| From | ***@***.***> |
| Date | 12/13/2024 18:55 |
| To | ***@***.***> |
| Cc | ***@***.***>,
***@***.***> |
| Subject | Re: [devemux86/cruiser] Cruiser 5.1.0 (Beta) (Discussion #671) |
Closed #671 as resolved.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
@Ptckh OSRM does not provide elevation information in the calculated routes. Better use another router, like BRouter (offline) that has many more options. Cruiser 5.2.0 is on Google Play: |
Beta Was this translation helpful? Give feedback.
-
|
Ok, thank you.
---- Replied Message ----
| From | ***@***.***> |
| Date | 1/12/2025 16:43 |
| To | ***@***.***> |
| Cc | ***@***.***>,
***@***.***> |
| Subject | Re: [devemux86/cruiser] Cruiser 5.1.0 (Beta) (Discussion #671) |
@Ptckh OSRM does not provide elevation information in the calculated routes.
Better use another router, like BRouter (offline) that has many more options.
Cruiser 5.2.0 is on Google Play:
#701
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Cruiser 5.1.0 (Beta) is available:
Speed limit panel new implementation #452 (comment)
(Settings | Navigation | Panels)
Panel to display the compass accuracy #667
(Settings | Application | Panels)
Panel to display the GPS recording time #660
(Settings | Application | Panels)
BRouter (offline) use distant waypoints for off-road routes #204 (comment)
(see the link for instructions)
BRouter (offline) turn instruction improvements #622
Import GPX with waypoints, route, track selection #44 (comment)
(see the link for instructions)
Extend route option during import #548
What's here? (offline local search) #644
(see the link for instructions)
Elevate Winter map theme (OpenAndroMaps) #676 (comment)
Chinese language #669 and voice navigation
Desktop extra keyboard shortcuts #309 (comment)
Improved map rendering
Many improvements
Beta Was this translation helpful? Give feedback.
All reactions