Nearby POI panels new implementation

[devemux86]

Another issue are the poi near route. I use Fuel, Kamera and Cafe and Restaurant. Problem is, I only can use all at the same time. I use two anels, so is shows to much cafe. Maybe its possible to set fuel and camera on one side, and the others on the other side.

Originally posted by @Cinemannix in #799 (comment).

[devemux86]

Now it shows the next nearby POI from all selected types in the available selected panels.
So if there too many e.g. cafe, then the fuel stations will only appear when they are next.

We could do it a better way:

• When select 1 POI type in settings: display the selected number of panels

• When select >1 POI types in settings: display one panel for each POI type

So the next e.g. fuel station always appears regardless of how many cafe are next on route.

[bios4]

I principle:

Three panels displayed: press panel for POI type X --> menu opens for POI type Y; third panel opens no menu at all
More than three panels: press any panel (regardless the type) --> menu always opens for "parking"

[devemux86]

@bios4 Thanks for the quick report. It will work properly in the next update.

[bios4]

Thanks for the quick fix @devemux86, that seems to work now! 👍

I found out that (at least some) POI types are not properly translated when tapping the panel, e.g. ATMs, drinking water and parking spaces:

When there are names available for a certain POI (e.g. shop names or fuel station brands), these are displayed OK.
If there are just the categories to be shown, it seems the translations are not applied.

Any chance to get this fixed?

[devemux86]

@bios4 Thanks for the report, I will check it.

[devemux86]

@bios4 It will work properly in the next update.

[DolomitesTom]

is this also working in simulation mode or only while navigating? Can this tempolimit only be show when speed + limit threshold is exceeded? At least it doesn't show anything for me in simulation mode. I would like to test this "Blitzdings" (flash thing).

[devemux86]

too many POIs activated

@DolomitesTom Activate 1-2 POI types. Otherwise voice announcements may overlap each other.

And if want to make tests, activate only 1 POI type. Tests with everything enabled obviously cannot be done.
Especially if there is a voice announcement for a turn at the same time with the announcement of the POI.

[DolomitesTom]

hmm, had only 2 activated, but none was voice announced, also with only one activated, can this maybe be a limitation in simulation mode?

[devemux86]

@DolomitesTom I found an improvement and this should work in the next update.

[DolomitesTom]

unfortunately not, I see all panels and the new feature to show at least one of each is great, but don't hear any announcement for POIs. Normal direction announcements are working.

[devemux86]

@DolomitesTom Please check the time when the posts are written.

The post about the improvement in the announcement has a much later time than the post about the Beta 10.

So please wait for the Beta 11.

[devemux86]

• Nearby POI panels new implementation is available in Cruiser 5.5.2 #820