Skip to content

ESU ECoS

Jump to bottom
Frans Jacobs edited this page Nov 23, 2025 · 1 revision

Choose ESU ECoS. JCS can automatically detect the ESU ECoS on the network using mDNS.

command-station-ECoS-pre

Click on the Discover button to start the discovery process. If you run JCS on Windows you might get the following security warning message:

jcs-install-Windows-beveiligingsmelding

Allow the use of the network.

When you run JCS on Linux it might be necessary to change the firewall to allow the mDNS service.

linux-firewall-config

When the ESU ECoS is discovered the IP Address of the CS should appear:

Click on the Check Button to check the connection. When successful the background of the IP Address should change to green. Click on the Connect button to connect to the ECoS. The screen will show the properties of the ECoS.

command-station-ECoS-discovered

JCS assumes that the number of feedback modules is configured on the ECoS. Click on the Update Button to synchronise the feedback modules between the ECoS and JCS.

plan_v

Clone this wiki locally