Installation

Installation

Requirements

• WeeWX 5.0 or later
• Python 3.7 or later
• Hardware that pushes its readings. See Protocols for the six protocols supported.

There are no other requirements: no pip packages and no compiler.

Install

weectl extension install https://github.com/hilman2/weewx-ultimate-push/releases/latest/download/weewx-ultimate-push-0.13.0.zip
sudo systemctl restart weewx

The installer sets station_type, writes the [UltimatePush] section, configures the rain counter, and enables the web interface with a token generated for this machine.

weectl station reconfigure also offers UltimatePush in its list.

To install from a clone instead:

git clone https://github.com/hilman2/weewx-ultimate-push.git
weectl extension install weewx-ultimate-push

Point the hardware at it

Ecowitt, Froggit, Misol

In WS View Plus: Weather Services, page through to Customized.

Field	Value
Protocol Type	Ecowitt
Server IP / Hostname	the machine running WeeWX
Path	/ unless you set path
Port	8000 unless you changed it
Upload Interval	60

Ambient Weather

In awnet: Device Settings, then the custom server fields.

Field	Value
Server IP / Hostname	the machine running WeeWX
Path	/data/report/ unless you set path
Port	8000
Protocol	Ambient
Upload Interval	60

Weather Underground

Set the server to the machine running WeeWX and the port to 8000. The path is fixed in the firmware and cannot be changed, so leave path out of the driver section. ID and PASSWORD can be anything you like; set password in the driver section to the same thing and uploads that do not present it are refused.

A Fine Offset console under Weather logger or HP1001 firmware speaks the metric dialect of this protocol. It is recognised on its own; read the wind note in Protocols before trusting the wind speed.

WeatherFlow

Nothing to point. The hub broadcasts on UDP 50222 whether or not anybody is listening. The driver has to be told to open that socket:

[UltimatePush]
    protocols = ecowitt, weatherflow

Both the hub and WeeWX have to be on the same network segment, because a broadcast does not cross a router.

Acurite and LaCrosse

Neither bridge can be told where to post. Both need their maker's hostname pointed at the machine running WeeWX:

Hardware	Hostname to redirect
Acurite smartHUB, Access	hubapi.myacurite.com
LaCrosse LW301, LW302	box.weatherdirect.com

How is up to your network. A dnsmasq entry, a rewrite on the router, or an entry in the DNS server the bridge uses. See Hardware.

Both bridges post to port 80, so WeeWX has to listen there, which needs root. Running WeeWX as root is not a good trade. Put a reverse proxy in front instead, or redirect the port with a firewall rule:

iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8000

Check before starting WeeWX

python -m user.ultimatepush --port 8001

Point the station at port 8001 for one upload, then change it back. The command prints which protocol it was, what arrived, what it could not place, which database columns are missing, and which of those already hold readings. Running it changes nothing.

Start

sudo systemctl restart weewx
sudo journalctl -u weewx -f

Within one upload interval the log shows:

INFO user.ultimatepush.driver: Driver version is 0.13.0, listening with weewx.listener for Ecowitt, Ambient Weather, Acurite, LaCrosse LW30x, Weather Underground
INFO weewx.listener: Listening for HTTP requests on *:8000
INFO weewx.engine: Starting main packet loop.

Then, on the first upload, which catalog it was read with:

INFO user.ultimatepush.driver: Reading ecowitt uploads with the 'ecowitt' catalog, 532 fields.

Followed by any fields waiting for a decision. See Field map.

Set the station up

Open the address the log reported. If nothing has uploaded yet, the page asks for a name and the hardware type, and displays the settings to enter into the console. With a station already recording, a second one is set up the same way and becomes an extra sensor without being asked. See Stations.

Rain

None of this hardware reports the rain since the last upload. It reports running counters, and the installer configures StdWXCalculate to difference dayRain, which suits four of the six protocols. WeatherFlow requires none of this. LaCrosse requires input = totalRain. The driver logs a warning at startup if the setting does not suit the protocols you enabled.

Upgrade

weectl extension install https://github.com/hilman2/weewx-ultimate-push/releases/latest/download/weewx-ultimate-push.zip
sudo systemctl restart weewx

Your [UltimatePush] section is left unchanged. Read the changelog first if you skipped versions: a field that moves is listed there.

Uninstall

weectl extension uninstall ultimate-push
weectl station reconfigure

Select another station type when asked. The database keeps everything it collected.