-
-
Notifications
You must be signed in to change notification settings - Fork 8
M 2000C
Basic support: the PCN (navigation control/display) and a summarized caution-light panel are shown on the CDU, with PCN lights mapped to the CDU LEDs. The AGP32 gear panel receives live gear-position, warning, clock, and chronograph data.
| Device | What it shows |
|---|---|
| CDU (MCDU / PFP3N / PFP7 / PFP4) | PCN coordinates/PREP/DEST, a condensed caution list, PCN status LEDs |
| AGP32 | Gear position lights + warning, UTC clock, chronograph |
- PCN display — the left/right coordinate windows plus the PREP and DEST numbers.
- Caution panel — the cockpit Caution Light Panel (CLP) is listed on the CDU, colour-coded by severity (advisory / warning / critical).
The PCN panel lights drive the CDU LEDs:
| CDU LED | PCN light |
|---|---|
| FM1 | ALN (alignment) |
| RDY | PRET (ready) |
| FM | NDEG |
| IND | MIP |
| FM2 | SEC |
| FAIL | UNI |
No dedicated brightness control.
The AGP32 gear panel shows live gear-position, warning, clock, and chronograph data:
| AGP32 LED | Meaning |
|---|---|
| Gear 1 (left) green | Left main gear down-and-locked |
| Gear 2 (nose) green | Aux gear down-and-locked |
| Gear 3 (right) green | Right main gear down-and-locked |
| UNLK triangles (all three) + red arrow | CONF panel red warning / gear lever light |
The AGP32 UTC clock is read from the cockpit clock needle positions and shown as HH:MM:SS,
in 12-hour format. Seconds are derived from the sub-minute position of the minute hand
(the cockpit clock has no separate second hand).
The cockpit chronograph needle sweeps 0–15 minutes; it is shown as MM:SS
(e.g. 01:45 = 1 min 45 s).
FCU/EFIS and PAP3 stay idle — the M-2000C does not publish speed, heading, or altitude.