mega-20260720

Release mega-20260720

This is a massive release, where quite a lot of ESPEasy has been changed.
The main changes are in the way how networking is handled and support for lots of new Espressif MCU's is added like the ESP32-P4, -C5, C61.

In the start post of this long 'test build' issue is a lengthy summary of most of the changes.

I would also like to thank all testers for the extremely valuable feedback during the quite lengthy testing process!

Backup settings before updating!

It is strongly adviced to make a backup of the settings of an older ESPEasy node and make sure to have access to the ESPEasy node when updating to this version as the network settings conversion may not cover 100% of all possible configurations in the field.
Some ESPEasy nodes getting updated to this version may need a power cycle after updating.

Changes in mega-20260720 (since mega-20260125):

Gijs Noorlander (9):

• [MFRC522] Speedup reading tag
• [network] Fix wifi#connected and wifi#disconnected events
• [network] Fix typo in event
• [Network] Add AT command write to PPP modem
• [Network] Add connected/disconnected event handling for all interfaces
• [network] Reduce CPU load + fix init NW interface event names
• [MQTT] Fix merge issues
• [Build] Change ESP8266 normal and collection builds to core 3.1.2
• [Build] Enable BUILD_NO_DEBUG for 2nd heap ESP8266 normal builds

TD-er (612):

• [WiFi] Split WiFi code specific for ESP8266 and ESP32
• [Cleanup] Get rid of ESP32-IDF code for IDF3.x or older
• [Cleanup] Fix spelling error in filename
• [WiFi] First part of moving code around to restructure WiFi code
• [WiFi] Start using simplified state machine for WiFi
• [WiFi] Restructure ESP32/ESP8266 code
• [WiFi] Allow connecting to hidden SSID network
• [WiFi] Fix build issue due to enum naming conflict
• [IPv6] Disable IPv6 for ESP32-C2
• [PSRAM] Free GPIO-16 and -17 on ESP32-classic when no PSRAM present
• [PSRAM] Fix build on ESP-IDF 5.1 + add special case of ESP32-picoD4
• [PSRAM] Cleanup code
• [PSRAM] Fix solo1 builds
• [WiFi] Add some debug log to track GotIP event
• [WiFi] Fix not showing /setup page
• [WiFi] Update to latest ESP-IDF SDK + handle gotIP event on ESP8266
• [WiFi] Fix event handling for WiFi on ESP32
• [WiFi] Fix start AP for setup
• [WiFi] Call WiFi_AP_Candidates.force_reload() on saving security setting
• [PSRAM] Use PSRAM for logs, events and controller queues
• [Memory] Fix freeing of allocated strings
• [Memory] Add small optimization in free_string() to prevent copying
• [ESP-IDF] Update to latest Arduino 3.1.2 for LittleFS builds
• [ESP-SDK] Update to ESP32/Arduino 3.1.3
• [ESPEasy p2p] Add node-IDs for new Espressif SoC models
• [WiFi] Fix processing connected event
• [ESP8266] Fix crash on processing log with weblog enabled.
• [Cleanup] Simplify generating sysinfo page
• [ESP8266] Fix crash on ESP8266 SDK 2.7.4
• [ESP8266] Balance more what should be allocated on 2nd heap
• [Build] Fix build issues on ESP32-xx
• [Memory] Make memory allocation on ESP8266 2nd heap more stable
• [Memory] Move C001 and C002 queue elements to 2nd heap (ESP8266)
• [Memory] Move other controller queue elements to 2nd heap (ESP8266)
• [ESP32S3] Fix bootloop on ESP32S3 with OPI PSRAM
• [WiFi] Fix not setting wifi as initialized too often
• [Memory] Improve memory usage on Strings and task data
• [Memory] Fix crashes on ESP32-S2 with 8M PSRAM
• [WiFi] Fix setting dynamic WiFi TX power
• [Cleanup] Optimize parsing system variables
• [Rules] Fix broken math parsing
• [WiFi] Fix (re-)connecting after WiFi connection lost
• [WiFi] Fix build error on ESP8266
• [Cleanup] Uncrustify WiFi/Network code
• [WiFi] Fix reconnecting + WiFi scan
• [ESP-IDF5.4] Prepare for ESP-IDF5.4 with Arduino 3.2.0
• [Eastron] Speed up parsing Modbus RTU messages
• [Serial] Add setXxBufferSize functions
• [ESP-IDF5.3] Update to latest Arduino/ESP-IDF5.3 version
• [timing stats] Simplify and speedup collecting timing stats
• [1-wire] Fix ESP8266 builds not fitting in IRAM
• [ESP32-C5] Add preliminary support for ESP32-C5 with dual band WiFi
• [ESP32-C5] Minor tweaks formatting used WiFi protocol
• [ESP32-C5] Fix file name error for platformio_esp32c5_envs.ini
• [ESP-IDF] Update to latest SDK/IDF
• [ESPtool] Prepare use of esptool v5.0.0
• [ESP32-S2] Change ADC for ESP32-S2 back to 13 bit
• [ESP-IDF] Revert to older build due to broken UART support
• [ESP32-C5] Add hardware specific info about ESP32-C5
• [Build] Get rid of all ESP32-SPIFFS builds
• [Build] Fix display ESP32 build
• [build] Change ESP32 IRExt builds to LIMIT_BUILD_SIZE
• [ESP32-C61] Start adding support for new SoC & generalize WiFi features
• [ADC] Fix not setting attenuation on internal ADC
• [ESP-IDF] Update to latest IDF/Arduino code for IDF 5.5
• [MFRC522] Speed-up detecting cards + make error recovery more stable
• [MFRC522] Improve range of reader
• Add HTML_Print and PrintToString helpers
• [MFRC522] Simplify board reset during init
• [MFRC522] Allow to dump card info to debug logs
• [MFRC522] Do proper timing for communicating with card
• [Rules] Fix processing variables with index > 2^31
• [Log] Add PrintToLog helper
• [Build] Add ESP32C5 to release.yml build script
• [ESP-IDF] Update to latest SDK version
• [MFRC522] Speedup reading by acting on interrupt pin
• [PWM motor] Speedup acting on limit switch interrupt
• [Web flasher] Update esp web tools to 8.1.10 to support ESP32-C5
• [PubSubClient] Update to new fork PubSubClient3
• [PubSubClient3] Speedup publish large messages using buffer
• [Build] Fix failed build due to missing include
• [ESP32-C5] Add option to force WiFi band 2.4/5 GHz
• [PubSubClient3] Add check for nullptr in CHECK_STRING_LENGTH
• [Controller] Fix crashes on MQTT callback calls
• [Network] Start adding Network config page
• [Network] Continue adding network config page
• [Network] Rename NetworkAdapter to NetworkDriver
• [Network] Start on initial first WiFi STA/AP drivers
• [Network] Add webform load/save for WiFi STA and AP
• [Network] Fix looping over CONTROLLER_MAX instead of NETWORK_MAX
• [ESP32P4] Add preliminary support for ESP32P4
• [ESP32P4] Fix crashes when trying to connect to WiFi
• [ESP32P4] Add more warnings for specific GPIO pins
• [Cleanup] Fix JS issues
• [Network] Add ETH config page + tweak Network Page
• [ESP32-P4] Add OTA update command for ESP32C6 WiFi firmware
• Merge branch 'mega' into bugfix/WiFi_state_machine
• [Network] Split ESP32P4 code from other MCUs
• [Network] Fix Ethernet on ESP32P4 + allow multiple active interfaces
• [Network] List all IP-addresses per network interface
• [Network] Process info based on NetworkInterface baseclass when possible
• [Network] Show Network Interface flags
• [PPP Modem] Add framework for new PPP Modem network interface
• [ESP32P4] Add extra HW serial ports supported by ESP32P4
• [Network] Split ETH into RMII and SPI + add template for PPP modem
• [Storage] Add generic key/value store to simplify data storage
• [Storage] Add load function for new key/value store
• [Storage] Add save function for new key/value store
• [Network] Add NetworkSettings type to store network interface settings
• [Network] Fix build issues
• [Network] Uncrustify new code
• [Storage] Add NWPluginData_base & optimize key/value store
• [Storage] Add tests for key/value store
• [Storage] Fix issues storing/loading from key/value store
• [Storage] Remove 0-termination for strings from raw stored data
• [Storage] Use key value store for storing network interfaces
• [PPP Modem] Add modem parameters to NW005 + fix compile issues
• [PPP modem] Add more settings + simplify key/value/store use
• [PPP modem] Add APN/Pin settings + show modem status
• [PPP Modem] Show more cell info + correct reported RSSI/BER values
• [Storage] Fix build on ESP8266 builds
• [PPP modem] Remove PPP Modem plugin from ESP32-C3 as there isn't support
• [PPP Modem] Fix build on LIMIT_BUILD_SIZE ESP32 builds
• [PPP Modem] Add UE Cell info + fix ESP32C2 build
• [PPP Modem] Disable PPP Modem plugin for 4M flash builds due to size
• [Build] Fix ESP32C6 builds
• [Build] Remove "CDC" from all env names due to linker issues
• [ESP-IDF] Update IDF 5.5 builds (P4/S3) to latest version
• [Network] Allow crash detection to turn off network interfaces
• [ESP32P4] Set Ethernet as default on ESP32P4 builds
• [PubSubClient] Update to latest lib version
• [PubSubClient3] Speedup publish large messages using buffer
• [Storage] Fix storing bool types
• [Controller] Fix bug not being able to add controller
• [Cleanup] Rename CPlugin and NWPlugin calls to make clear where used
• [Network] Add WiFi/AP when not present in settings + limit options
• [Plugin] Rename PluginCall functions to use same convention as controllers
• [PPP Modem] Make PPP.begin() non-blocking by running in RTOS task
• [PPP Modem] Initialize C-code to NULL instead of nullptr
• [Network] Fix saving WiFi STA & WiFi AP settings
• [Network] Add route prio to network overview
• [Network] Move network plugin code to new ESPEasy::net namespace
• [Network] Move ESPEasy::net namespace code to new folder structure
• [Network] Move global runtime data to new ESPEasy::net namespace
• [Network] Move more WiFi related code into ESPEasy::net::wifi namespace
• [Network] Move Network code to ESPEasy::net namespace
• [Network] Disable ETH for ESP32-xx Display builds to make builds fit
• [Network] Fix ESP32-classic display build with ETH disabled
• [Network] Move EthernetParameters to ESPEasy::net namespace
• [Network] Move MetworkMedium to new ESPEasy::net:: namespace
• [Network] Move WiFiAPcandidates files to ESPEasy::net::wifi namespace
• [Network] Fix setting up last network/controller entry
• [Network] Move WiFi init code to NW001_WiFi_STA plugin
• [MQTT AutoDiscovery] Fix merge issues
• [PPP modem] Make init of PPP modem more reliable
• [Network] Show connected duration in more readable format
• [Network] Add networkenable / -disable commands + fix for controllers
• [Controller] Fix proper checking when calling CPLUGIN_xxx functions
• [Network] Fix build on ESP8266
• [Controllers] Call [C/NW]PLUGIN_EXIT before _INIT when saving settings
• [Tasks] Fix scheduled Plugin Task Timer & proper task exit/init
• [Build] Fix failing ESP8266 custom build
• [Build] Reduce build size for ESP8266 builds
• [ESP-IDF] Update to latest ESP-IDF/Arduino for ESP32-xx
• [PPP Modem] Disable PPP Modem on platforms that don't support it
• [Network] Add mechanism to restore cached DNS servers
• [Network] Fix ESP8266 build + add log when DNS is restored from cache
• [Network] Fix mangled DNS servers when switching default route interface
• [Network] Trigger checking for DNS server on default NW-IF after event
• [Network] Make connected info more consistent among network interfaces
• [Network] Move common code to collect connection stats to base class
• [Network] Add test to see if we can track interface traffic count
• [Build] Fix ESP32 build due to missing include
• [Network] Show connection info for each interface
• [Network] Reduce code duplication showing connection info
• [Build] Fix ESP-IDF 5.5 platform to specific one before pip -> uv change
• [WiFi] Show WiFi Auth mode in connection info
• [Network] Start removing connected checks from WiFi/Eth EventData
• [Network] Clean up code duplication handling network events
• [Controller] Make connection timeout dynamic per host & networkinterface
• [Network] Remove more legacy WiFiEventData code
• [Network] Cleanup + add charts for RSSI/TX-pwr, traffic, etc.
• [Network] Fix ESP8266 build issues
• [Network] Fix build on ESP8266 1M build
• [Build] Reduce build size on ESP8266 builds
• [Build] Fix copy/paste error on ESP32 builds
• [Network] Fix corrupting settings on ESP8266
• [Network] Add Route Prio setting for each network interface (ESP32-xx)
• [Network] Fix access control check for accessing web config
• [Network] Add column with interface number to Network overview page
• [Network] Fix NAPT forwarding when client connects/disconnects
• [Network] Show connected clients to AP + cleanup charts/stats
• [cleanup] Remove duplicate code in xPlugin tables
• [network] Fix 'Enable' checkbox consistency & bootloop with AP disabled
• [Network] Fix crashes when toggling WiFi/AP on/off
• [network] Show detailed received IPv6 info in the logs
• [Network] Fix ESP8266 build
• [Network] Fix merge-conflict on ESP32-build
• [ESP-IDF] Move to IDF5.5 for all ESP32-xx builds
• [Build] Fix missing include
• [Build] Define BUILD_NO_DEBUG for Collection_E builds
• [ESP-IDF] update to latest ESP-IDF5.5
• [Build] Define BUILD_NO_DEBUG for all collection builds
• [USBCDC] Fix USB-CDC for ESP32S2 builds
• [Build] Define BUILD_NO_DEBUG for ESP32 Collection A builds
• [Network] Fix collecting RX/TX traffic data
• [Network] Add FEATURE_NETWORK_TRAFFIC_COUNT to toggle tracking traffic
• [Network] Add FEATURE_NETWORK_STATS to toggle collecting network stats
• [Network] Fix reported traffic RX/TX Bytes
• [USBCDC] Properly fix USB CDC issues on ESP32-S2
• [Build] Define BUILD_NO_DEBUG for Display builds
• [Network] Fix xxx#Connected / #Disconnected events
• [Build] Fix merge issues
• [WiFi] Fix WiFi reconnect issues
• [RC522] Add support for 7-byte NFC UIDs
• [webUI] Move Hardware tab before Network tab
• [Build] Fix merge issue
• [SysVars] Fix showing variables with hex number as index
• [MFRC522] Add immediate event on tag removal
• [LAN867x] Add support for LAN867x Ethernet controller (RMII)
• [Network] Exit all networks before reboot
• [WiFi] Fix scanning WiFi returns no networks found
• [Network] Fix showing stats and connection info
• [WiFi] Fix reported WiFi enc. mode on ESP8266
• [WiFi] Clear uses of WiFiEventData for ESP8266 builds
• [Eth] Clear uses of EthEventData for ESP32 builds
• [Build] Fix ESP8266 build
• [WiFi] Fix wifi reconnect (on ESP32)
• [WiFi] Fix internal WiFi state matching real connected state.
• [Network] Log got IP events
• [Network] Add checks to see if _netif is a valid pointer
• [Network] Make logging gotIPv6 events not do memory allocation
• [NeoPixel] Make NeoPixelSendStatus use less memory allocations
• [MQTTDiscovery] Reduce mem alloc MQTT_DiscoveryPublishWithStatusAndSet
• [Network] Remove unused base_class check for NWPluginData structs
• [Network] Add ESPEasy event when network is enabled/disabled
• [Log] Only process log to serial when in "Arduino RTOS task"
• [WiFi] Make sure WiFi actually is disconnected when trying to reconnect
• [MQTT] Only try to run background MQTT connect when connected to network
• [CSS] Tweaks for newly added Network tab
• [web UI] Change tab icons to be more uniform and working on Apple
• [WiFi] Fix automatic redirect on Captive Portal
• [MQTT] Reduce work/memory in background task, use xTaskDelay as required
• [WiFi AP] Fix switching between NAPT and Captive Portal
• [Build] Reduce bin size for ESP32 collection builds
• [Provision] Fix not able to provision files
• [PPP modem] Fix crash when PPP modem is enabled but not present
• [Docs] Add stubs for documenting new Network design
• [TaskValueSet] Fix setting 64-bit int values to a dummy task
• [CacheReader] Fix reading cache files from CacheController
• [CacheReader] Add support for 64bit ints + output as events
• [CacheReader] Fix continue reading after crash/reboot
• [CacheReader] Fix incorrect settings array index
• [CacheReader] Fix incorrect settings array index
• [CacheReader] Fix incorrect settings array index
• [Cleanup] Only show MQTT connected stats on enabled controller
• [CacheReader] Fix reading cache files when files are missing
• [PPP modem] Add DTR pin option to regain access to modem in CMUX mode
• [Cleanup] Simplify managing key-value representation in web UI / JSON
• [JSON] Simplify writing JSON page
• [JSON] Fine-tune + speedup generating JSON
• [Log] Use new streaming JSON writer to generate web log
• [Cache Controller] Use new JSON functions to generate cache_json
• [JSON] Fine tune new JSON generation functions
• [Cleanup] Wrap #ifdef WEBSERVER_NEW_UI.. around functions only used then
• [JSON] Change handle_sysinfo_json() to use new JSON formatting functions
• [JSON] Fix pretty-print generated JSON + add createChild() option
• [JSON] Use new createChild function
• [JSON] Simplify code + reduce build size due to less dependencies
• [JSON] Add option to print JSON to String + convert Domoticz JSON
• [Build] Set ESP8266 IR builds to esp8266/Arduino 3.1.2
• [Build] Fix custom_IR_ESP8266_4M1M build
• [C009 FHEM] Use new JSON code to generate response
• [Cleanup] Remove no longer used to_json_object_value functions
• [Cleanup] Reduce bin size: unsigned long to uint32_t and long to int32_t
• [JSON] Move KeyValueWriter_JSON to src/Helpers/
• [Network] Use new WebForm writer for gathering network adapter info
• [Network] Cleanup code + generate more network info using new K/V writer
• [JSON] Add same info on network adapters & sysinfo & JSON page
• [Build] Fix ESP8266 build fail due to variable type mismatch
• [Build] Reduce bin size by disabling logs in BUILD_NO_DEBUG builds
• [Build] Fix failed custom ESP8266 build, disable CustomProvisioning
• [Build] Disable C014 (Homie) and C017 (Zabbix) for ESP8266 Collections
• [Build] Disable more logs with BUILD_NO_DEBUG on ESP8266
• [Build] Fix failing build hard_SONOFF_POW_4M1M
• [Build] Fix build errors on RISC-V like ESP32-C2/C3/C5/C6
• [Build] Fix build error on safeboot builds
• [Build] Set BUILD_NO_DEBUG for all NeoPixel builds to make builds fit
• [Build] Fix failing max_ESP32c5_8M1M_LittleFS_ETH builds
• [Cleanup] Reduce bin size & simplify ValueStruct
• [ESP-IDF] Update to latest Arduino/ESP-IDF
• [Log] Simplify web log buffering
• [Log] Speedup finding 'next' log element to process
• [Build] Fix ESP8266 build fail as std::make_unique is not (yet) known
• [WebLog] Send many log messages in chunks of 200 msec.
• [TLS] Update TLS to be able to use ECDHE_ECDSA_AES_128_GCM_SHA256 cipher
• [TimingStats] Add stat to measure time spent processing MQTT messages
• [TLS-MQTT] Automatic switch to ECDSA when error is 296 (TLS handshake)
• [Provision] Add option to store (WiFi) credentials to separate file
• [Build] Fix build issues on ESP8266
• [WiFi Setup] Store credentials via setup page to separate file
• [TAR] Fix creating unusable TAR files when backup all
• [WiFi AP] Fix generating correct events when WiFi AP turns on/off
• [WiFi] Fix starting AP when no credentials present or known APs found
• [Log] Convert all ESPEasy console output to LOG_LEVEL_NONE log entry
• [Log] Serial Console pulls logitems when UART buffer is ready + colorize
• [Log] Fix log output to webflasher console + colorize LogEntry output
• [Log] Clearly mark commands in log + source of the command
• [Log] Cleanup and simplify log level code
• [Log] Make syslog to use the new log queue + fix syslog crashes
• [Log] Fix build on ESP8266 + log level label in console + syslog format
• [ChartJS] Use new JSON key-value-writer + cleanup ChartJS code
• [Cleanup] Rename Sp_KeyValueWriter to Up_KeyValueWriter
• [ChartJS] Cleanup forcing "null" on NaN values in JSON
• [Cleanup] Simplify use of LabelType
• [ESP8266] Fix build issues due to older compiler for ESP8266 2.7.4
• [Cleanup] Make nearly all of sysinfo page use new KeyValueStruct writers
• [Cleanup] Make ESP8266 builds fit again + tweak reducing generated HTML
• [Climate] Remove P169 (AS3935 lightning Detector) from ESP8266 builds
• [Build] Revert ESP-IDF/Arduino to make Solo1 and ESP32-P4 build again
• [Cleanup] Simplify ValueStruct to reduce bin size + speed up processing
• [ESPEasy] Increase nr of ints in EventStruct
• [PPP modem] Show mobile provider name from SIM card
• [ValueStruct] Reduce memory allocations on short strings
• [LogEntry] Reduce LogEntry struct to 16 bytes per log item in memory
• [ValueStruct] Fix order initialization members
• [KeyValueStruct] Add standard Unit-of-Measure units
• [WebForm] Show bool types from key/value struct as checkmark
• [ValueStruct] Fix edge case crash copying values.
• [Build] Wrap calls to setUnit in #if FEATURE_TASKVALUE_UNIT_OF_MEASURE
• [ChartJS] Make charts appear on the full width and responsive
• [Charts] Remove no longer needed chart height/width & cleanup code
• [ESPEasy p2p] Cleanup use of std::unique_ptr + p2p data structs
• [Ethernet] Set hostname when Ethernet device is started
• [Build] Reduce build size by disabling GitHub copy button for ESP8266
• [ESP32-P4] Fix WiFi/Eth issues on ESP32-P4 + optimize memory allocations
• [Units Of Measure] fix merge issues PR #5419
• [ESP32P4] Disable USB HWCDC to fix ESPEasy console for ESP32P4
• [ESP-Hosted] Show more info on ESP-Hosted-MCU WiFi (ESP32-P4)
• [ESP-Hosted] Make sure hostname is set on ESP-Hosted-MCU before DHCP
• [IPv6] Add option to enable/disable IPv6 per network adapter
• [JSON] Write empty "Sensors" array when no tasks defined
• [Eth] Move duplicate code to shared functions to display info
• [ETH] Remove left-over code duplication after split RMII/SPI adapters
• [ESPEasy Console] Fix console on both HWCDC and Serial0
• [Network] Make connected check more direct when starting connection
• [Build] Fix flush() vs. clear() as it differs between ESP8266 and ESP32
• [Build] Make normal_ESP8266_1M_VCC not fail building (still too big)
• [Build] Fix build issue due to missing forward decl. of enum
• [Sysinfo] Add missing Unit-of-measure on file system size
• [Ethernet] Add already setup Ethernet when upgrading ESPEasy
• [Sysinfo] Hide WiFi info when no WiFi is enabled
• [Network] Start adding JSON import/export Network settings per adapter
• [Build] Disable Framed OLED on 1M ESP8266 Normal builds due to size
• [Network] Add networkexportconfig command to export to JSON
• [Network] Add NetworkImportConfig command
• [Eth] Store settings for RMII and SPI Ethernet to KV-store
• [Ethernet] Allocate unused ETH interface support multiple ETH instances
• [Ethernet] Fix saving settings to KVS
• [Network] Restart services (e.g. ESPEasy p2p) when default route changes
• [ESP-IDF] Update to latest Arduino/IDF code with fix for SPI Eth MAC
• [ESP8266] Fix failing ESP8266 build
• [Build] Remove _LittleFS and _ETH from build names due to linker issues
• [Build] Fix build fail with builds without Ethernet support
• [ESP32-P4] Disable OTA update for ESP-HOSTED-MCU on ESP32P4 for now
• [Build] Enable custom_remove_include to not build ignored libs
• [Web Flasher] Update script to generate webflasher for new build names
• [Network] Simplify ETH Event handling + update ESP-IDF/Arduino 3.3.3
• [Build] Limit package building to use Python 3.13
• [Build] Fix Solo1 builds
• [Ethernet] Fix loading RMII Eth settings from KVS
• [Ethernet] Fix loading SPI Ethernet settings from KVS
• [Ethernet] Cleanup showing GPIO conflicts/usage
• [Ethernet] Remove no longer needed commands to setup ETH
• [Ethernet] Make Periman reported conflicts the reported conflicts
• [Network] Remove obsolete code from Config and Tools->Advanced page
• [ESP32-C61] Add initial support for ESP32-C61
• [Collection] Remove P038 and P095 from ESP32 Collection builds
• [ESP32-solo1] Add flags to fix IDF5.5 issues for 'esp32-solo1' boards
• [ESP32-P4] Add chip-variant option to support P4 rev 1 and rev 3
• [Build] Speed up builds, add not used libs to lib_ignore
• [WebFlasher] Add support for ESP32-C5/C61 for the webflasher
• [ESPEasy p2p] Add IDs of not yet supported ESP MCUs
• [ESP32-P4/-C61] Update Arduino/IDF to support ESP32-C61 & ESP32-P4 preV3
• [ColorCode] Add NetworkEnable/Disable commands to ColorCode JavaScript
• [WiFi] Fix check for available credentials only in device specific file
• [Network] Fix processing network events on disconnect + simplify check
• [webflasher] Add 'chipVariant' to distinguish ESP32-P4 variants
• [Hardware Info] Show differences between ESP32-C6H4 and ESP32-C6H8
• [Cleanup] Mark unused members in SettingsStruct
• [WiFi] Cleanup WiFi/AP settings + simplify when to start AP mode
• [Build] Fix failed minimal ESP8266 build
• [Build] Fix solo1 builds due to wrongly set LTO flags
• [WebUI] Simplify adding HTML form fields
• [WiFi] Simplify WiFi AP fallback scenarios
• [Build] Fix failing ESP8266 builds
• [P180] BusCmd_Helper processing I2C commands via cmd subcommand was locked out
• [C023] Clone C018 code to C023
• [C023] Remove links to RN2483 code
• [C023] Add initial support for Dragino LA66 LoRaWAN module
• [C023] Add querying LA66 + receive downlink messages
• [C023] Add option to trigger events via downlink messages + code cleanup
• [C023] Fix timeout reading from LoRa + set ClassC after joined
• [C023] Cleanup LoRa AT-command controller + fix parse responses
• [WiFi] Add link to ESP-Hosted-MCU firmware builds
• [C023] Add initial support for RAK3172 LoRaWAN (m5stack AtomDTU)
• [C023] Cleanup AT-command LoRaWAN
• [C023] Add support for RAK3172 LoRaWAN (m5stack AtomDTU)
• [ESP-IDF] Update to latest ESP-IDF/Arduino
• [USBCDC] Simplify code defining USBCDC(TinyUSB) vs. HWCDC
• [C023] Remove debug log
• [Bug] Fix formatToHex_wordarray
• [Network] Enable Network Stats when plugin stats are also enabled
• [WiFi] Fix reconnecting when connection gets interrupted
• [Network] Fix enable/disable IPv6 per network interface
• [Build] Make syslog optional to reduce build size
• [Build] Add flags to disable webserver JSON or syslog to reduce bin size
• [OLED] Fix: 128×64 shows only left half in display_A builds (#5469)
• [Web Flasher] Fix generated web flasher manifest JSON
• [Serial Console] Fix outputting data to USBCDC port for ESP32S2
• [TimingStats] Tweak timing stats for console output
• [Domoticz] Fix Domoticz MQTT outputting svalue wrapped in quotes
• Update README.md
• [Build] Fix failing custom build (#5485)
• [Build] Fix failing custom build (#5485)
• [ESP-IDF] Update to latest 1901-1318-5.5 platform build
• [Build] Fix compile issues
• Revert "[ESP-IDF] Update to latest 1901-1318-5.5 platform build"
• [Sysinfo] Show free space on file system
• [ESP-IDF] Update to latest IDF/Arduino code to test if P4 builds work
• [Build] Fix non-ESP32P4 builds with latest ESP-IDF/Arduino
• [Build] Set BUILD_NO_DEBUG for Climate-A builds to make them fit again
• [SPI] Fix returning 'other' SPI bus for user defined SPI
• [Interfaces] Split SPI and I2C config into new Interfaces page
• [WebUI] Add some icon to Interfaces tab + minor tweaks
• [ESP-IDF] Update to latest ESP-IDF/Arduino SDK
• [Web UI] Change icon for Interfaces
• [Build] Try to reduce build size for ESP8266 minimal, disable I2C/SPI
• [Build] Fix failing neopixel_ESP8266_1M_Domoticz build
• [Build] Fix failing minimal_IRext_ESP8266_4M1M
• [Build] Fix failing build safeboot_ESP32c2_4M_LittleFS
• Update generate_web_flasher_manifest.py fix showing C6 in list
• [Network] Add 'Fallback Network Interface' concept.
• [Network] Fix failing build on ESP8266
• [Network] Start documenting Fallback Network Interface
• [WiFi] Make WiFi AP act as fallback device when set as such.
• [USB-CDC] Fix USB disconnect on reboot for USB-JTAG/CDC boards
• [USB-CDC] Fix USB disconnect on reboot for USB-JTAG/CDC boards
• [TM1637] Fix timing issues for ESP32-builds for P073 TM1637
• [TM1637] Fix timing issues for ESP32-builds for P073 TM1637
• [Direct GPIO] Add missing function decl. for ESP8266
• [Direct GPIO] Add missing function decl. for ESP8266
• [ESP8266 build] Fix failing custom ESP8266 build using Custom.h
• [ESP8266 build] Fix failing custom ESP8266 build using Custom.h
• [WiFi] Fix setting hostname before starting WiFi on ESP8266
• [WiFi] Fix build on ESP8266 SDK 2.7.4
• [WiFi] Set ESP8266 hostname each time before starting WiFi.begin()
• [TM1637] Fine tune signal timing
• [TM1637] Fine tune signal timing
• [TM1637] Make clock timing more constant + fix end of transmission mark
• [TM1637] Make clock timing more constant + fix end of transmission mark
• [TM1637] Pull DIO pin low before switching to input for ACK
• [TM1637] Pull DIO pin low before switching to input for ACK
• [TM1637] Change init procedure not calling directGPIO at init
• [TM1637] Change GPIO toggling to toggle input/output + enable pull-up
• [TM1637] Fix proper timings for start/end sequence
• [TM1637] Change init procedure not calling directGPIO at init
• [TM1637] Change GPIO toggling to toggle input/output + enable pull-up
• [TM1637] Fix proper timings for start/end sequence
• [ESP-IDF] Switch to latest ESP-IDF / Arduino SDK & GCC 15.2
• [Build] Fix failing build for minimal_core_274_ESP8266_1M_OTA_FHEM_HA
• [Build] Fix failing build for minimal_core_274_ESP8266_1M_OTA_FHEM_HA
• [Build] Reduce build size by tweaking compile flags
• [Build] Fix mDNS builds + failing FEATURE_MQTT_TLS=0 & HTTP_TLS=1
• [ESP32-P4] Fix failing ESP32-P4 build due to upstream ESP-IDF changes
• [mDNS] Fix mDNS on ESP8266
• [ESPEasyP2P] Add ESP32-S31 as node ID to be recognized as ESP type
• [Serial Console] Fix showing console output in VScode
• [Console] Fix sluggish reply on console input + allow disable color logs
• [Git] Add sdkconfig.* to .gitignore
• [GPIO] Fix GPIO re-assign on ESP32 previously used by serial
• [Build] Add missing changes for disable colorize logs
• [ESP-IDF6.0] Add support for latest IDF6.0
• [mDNS] Properly destruct MDNS objects when updating
• [SPI Eth] Fix SPI Ethernet using correct SPI bus
• [ESP-IDF] Revert to IDF 5.5.3
• [SPI] Fix build on ESP32C3
• [SPI] Simplify SPI code + fix SPI bus selection
• [Build] Fix build missing #if FEATURE_SD
• [Web UI] Fix selected disabled item not getting saved
• [SPI] Fix potential uninitialized spi gpio pins
• [WiFi-AP] Extend WiFiAPmode command to toggle WiFi-AP without disable it
• [P169] AS3935 Lightning Detector was missing from Climate B builds
• [Network] Fix starting fallback interfaces if all are fallback on ESP32
• [mDNS] Add mDNS for ESP32 builds
• [mDNS] Update ESP32 mDNS lib + improve handling fallback AP on ESP8266
• [Docs] Update links to datasheets + TR of supported ESP chips
• [Docs] Fix frequency of ESP32-S31 + ESPEasy supported since
• [Docs] Fix rendering supported CPUs table
• [mDNS] Add flag to toggle mDNS
• [Network] Reduce includes in network code
• [Network] Fix failing custom_beta_2ndheap_ESP8266_4M1M
• [Network] Reduce number of includes in WiFi/Network code
• [Build] Fix hard_SONOFF_POW_4M1M build
• [Cleanup] Reduce number of includes
• [Build] Fix failing build collection_C_ESP32_IRExt_4M316k
• [WiFi] Fix odd WiFi behavior on ESP8266
• [Build] Reduce size of custom ESP8266 build
• [ESP8266] Simplify device info functions on ESP8266
• [ESP8266] Define more bus specifics for ESP8266 in esp8266_soc_caps.h
• [Cleanup] Add 'override' to virtual controller queue functions
• [Cleanup] Add 'override' to virtual functions libs changed for ESPEasy
• [Cleanup] Fix failing builds due to different virtual function sigs
• [Network] Cleanup code + show connection info on ESP8266 adapter page
• [Cleanup] Comment unused NWPluigin functions
• [mDNS] Disable mDNS in builds as it is considered unstable
• [WiFi] Fix initial WiFi setup via soft-AP
• [Build] Fix missing include for ESP32 builds
• [WiFi] Fix uncrustify messing up wifiChannels table
• [WiFi] Fix captive portal and initial setup for ESP32-S2
• [WiFi] Fix crash on saving WiFi settings with active network connections
• [WiFi] Add OTA update for ESP-Hosted-MCU on ESP32-P4
• [sendToHttp] Fix SendToHttp HTTPS command using HTTPClientLight
• [Build] Fix include for ESP8266 builds
• [sendToHTTP] Fix sendToHTTP using the new lib for https. (revuew by Ton)
• [ESP-IDF] Update to latest ESP-IDF/Arduino
• [RMII Eth] Fix setting clock mode + document NW config import/export
• [Docs] Update ESP-Chips table
• [ESP32P4r3] Add support for ESP32-P4 rev3
• [Eth] Fix static IP for Ethernet
• [Build] Fix missing include on minimal_core_312_ESP8266_1M_OTA_Domoticz
• [Build] Fix missing include for collection_H_ESP32_IRExt_4M316k build
• [WiFi] Fix slowdown issues using Eth on ESP32-P4 with WiFi off
• [WiFi] Make Captive Portal more intuitive and only act when connected to AP
• [WiFi] Fix continuous logs flood + fix check for no credentials
• [Build] Fix ESP8266 build
• Fix syslog packets contain only a prefix (#5538)
• [ETH] Fix setting static IP for Ethernet network interfaces
• [Build] Remove normal_beta_ESP8266_16M_LittleFS
• [Build] Fix missing include
• [WiFi] Fix static IP for WiFi
• [WiFi] Fix static IP for ESP8266
• [ESP32S2] Add MAX 8M1M build for ESP32-S2
• [ESP-IDF] Update to latest IDF/Arduino code
• [Sysinfo] Fix reporting used sketch size on sysinfo page
• [Console] Fix setting correct TX buffer size + add checks + cleanup
• [WiFi] Fix setting init/exit/gotIP flags on Network interfaces
• [ESP32S2] Fix using UART/USBCDC on ESP32S2
• [WiFi] Fix some minor WiFi issues when saving settings (still 5min wait)
• [WiFi] Fix WiFi reconnect + event duplicates on ESP8266
• [ESP32P4] Fix crashes on older ESP-HOSTED-MCU fw & detection 32M flash
• [32M flash] Fix including all 'MAX' plugins for 32M flash builds
• [ESP-Hosted-MCU] Fix OTA URL + speedup log output to serial
• [ESP32-P4] Enable WiFi STA interface on factory reset
• [Webflasher] Add 32M builds to the page generator script
• [Webflasher] Use flash size detection to simplify MAX build selection
• [webflasher] Cleanup Python script to generate page + set to 460800 baud
• [DirectGPIO] Use low-level HAL commands from ESP-IDF for ESP32-xx
• [PubSubClient3] Update to latest MQTT Client PubSubClient3
• [Network] Improve response time on network disconnect for MQTT client
• [Network] Add setting whether to collect network stats (ESP32-only)
• [ESP32S2] Improve free RAM on ESP32S2
• [Network] Fix crash saving network interface settings with p2p active
• [TM1637] Fix ESP8266 not working with TM1637 (#5541)
• [ESP32S3] Fix random crashes on ESP32S3 with PSRAM
• [WiFi] Fix using all set WiFi credentials
• [AccessControl] Fix checking for allowed IP range
• [ESP8266] Fix ESP8266 builds missing include
• [WiFi AP] Fix really stupid error setting WiFi AP static IP
• [ESP-IDF] Update Arduino/ESP-IDF to latest version
• [WebFlasher] Update webflasher to 12.2.4
• [Network] Fix route setting priority (ESP32-only)
• [Network] Fix properly clearing runtime data when starting nw interface
• [Arduino 3.3.9] Update to latest espressif32/Arduino 3.3.9
• [Docs] Add link to Supported Features and Peripherals on ESP32-xx
• [AccessControl] Fix checking for allowed IP access of webinterface
• [Build] Fix custom build missing an include for Metrics.cpp
• [Build] Fix sort custom vars on ESP8266
• [SysVarSort] Only sort system variables on ESP32 due to build size
• [WiFi] Fix stack overflow crash when no credentials set
• [WiFi] Simplify state machine for WiFi STA
• [WiFi] Update WiFi state diagrams
• [WiFi] Simplify WiFi STA state machine
• [WiFi] Cleanup STA state machine code
• [WiFi] Add state diagrams to WiFi documentation
• [Network] Simplify connected/disconnected and enabled/disabled events
• [PWM] Disable fade for ESP32 PWM for now.
• [SendToHttps] Fix crash and actually working + connect timeout
• [Build] Fix failing ESP32C2 Safeboot build.
• [SendToHttps] Log HTTP return code even on BUILD_NO_DEBUG
• [Forms] Add optional changed bool to simplify checking for changes
• [Webserver] Remove code duplication send start of page
• [Webserver] Remove & simplify duplicate code send end of page
• [PPP] Show info even when no connection to provider is active
• [PPP Docs] Add documentation on NW005 PPP Modem
• [PPP Docs] Add description and some tips regarding power
• [Docs] Add documentation for WiFi STA/AP + reformat other network docs
• [Docs] Describe WiFi modes and Passive/Active scan
• [WiFi] Simplify passive/active scan note
• [Docs] Describe rest of WiFi settings
• [Docs] Fix section/subsection marking on PPP page.
• [Docs] Remove empty 'Description' subsection from NW001 page
• [Docs] Add missing documentation for WiFi AP + cleanup network docs
• [Network] Add option to append NW interface name to hostname
• [Docs] Add link of ESP32-Arduino supported features per ESP32-variant
• [Cleanup] Set development/debug log as LOG_LEVEL_DEBUG
• [Network] Add "Append Name to Hostname" to import/export
• [Network] Fix import/export for WiFi STA and AP
• [Docs] Document the Network overview tab
• [Docs] Document the devsecurity.dat file
• [Docs] Add missing network overview tab screenshot
• automatically updated release notes for mega-20260720

Ton Huisman (166):

• [SPI] Add support for multiple SPI buses
• [P095] Enable support for configurable SPI bus
• [P104] Enable support for configurable SPI bus
• [P116] Enable support for configurable SPI bus
• [P141] Enable support for configurable SPI bus
• [P172] Enable support for configurable SPI bus
• [P162] Enable support for configurable SPI bus
• [P162] Fix compilation for ESP8266
• [P125] Enable support for configurable SPI bus
• [P118] Enable support for configurable SPI bus
• [P111] Enable support for configurable SPI bus (and reformat source)
• [P099] Enable support for configurable SPI bus
• [P096] Enable support for configurable SPI bus
• [P039] Move (nearly) all code to PluginStrucs files
• [P039] Enable support for configurable SPI bus
• [SPI] Show SPI Bus selector also if only second bus enabled
• [SPI] Fix initialization for standard FSPI bus
• [SPI] Improvements in cross-bus GPIO config validation
• [Storage] Add settings for External EEPROM
• [SPI] Rename SPI1 object to SPIe to avoid conflict for ESP32-Classic builds
• [SPI] Code improvements, separate SPI functions, re-init SPI when saving Hardware page
• [P039] Fix compiler warning (nested comments)
• [MQTT] Reconnect on unexpected network interruptions
• [SPI] Disconnect SPI GPIO pins also when not using them
• [P116] Fix GPIO display on Devices page, no default GPIO pins for ESP32
• [P095] Fix GPIO display on Devices page, fix typos, no default GPIO pins for ESP32
• [SPI] Rename settings variable for better usage indication (review comment)
• [MQTT] Cancel background connection request after 2 minutes when still not connected
• [MQTT] Fix reconnect on unexpected network interruptions
• [Discovery] Avoid setting the timeout more than once
• [MQTT] Use client timeout for delay between connection attempts
• [Build] Fix missing FEATURE_SD check
• [P132] Additional support for INA226, INA228, INA230, INA231 and INA260
• [P132] Fix some typos
• [P132] Fix some more typos
• [P132] Fix one more typo and clean up code
• [P132] Add INA231 to plugin name
• [P132] Update documentation
• [P132] Fix conversion rate settings for INA228
• [P132] Fix defaults for INA228
• [P132] Update documentation for INA228 conversion rates
• [P132] Refactor Shunt settings and add more high-current options
• [P132] Update documentation for extended Shunt setting
• [P132] Fix rounding for 400A shunt
• [P132] Better selector-descriptions for shunt values
• Merge branch 'mega' of https://github.com/letscontrolit/ESPEasy into feature/SPI-add-support-for-multiple-buses, fix conflicts
• [P135] Bugfix: Correct Discovery VTypes
• [SPI] Add SPI bus selector to SPI Ethernet plugin
• [MQTT] Bugfix: Import wasn't initiated and handled correctly
• [Cleanup] Remove Provisioningxxx fall-back commands and other fixes
• [Docs] Fix some small typos
• [Log] Restore EVENT: (some event) in logging for BUILD_NO_DEBUG builds
• [Log] Restore ACT : (rules action) in logging for BUILD_NO_DEBUG builds
• [P073] Bugfix: Display stays blank after upgrade without settings-save (#5475)
• [P132] Improve calculation accuracy determining shunt microVolt factor
• [P132] Only read measurement when conversion is ready
• [P132] Enable extended features for Energy build ESP8266 for now
• [Build] Fix compilation with Custom.h and TLS on ESP32
• [Fixes] Various fixes and improvements Feb 2026
• [CI] Fix github yaml syntax issues
• [P132] Fix MQTT Discovery for Power setting
• [Docs] Fix warnings and doc-build errors, remove deprecated plugin from conf.py
• [P104] Add font with Cyrillic characters in high-ASCII area
• [P104] Updated documentation for Cyrillic font
• [P104] Updated Cyrillic ext. font with more elaborate character set
• [P104] Updated Cyrillic ext. font with a more visually pleasing character set
• [SPI] Add support (check) for ESP32-C61 in getSPIBusCount()
• [P180] Set Cache-name field by default when empty for better performance, docs updated
• [Docs] Use pioarduino plugin instead of PlatformIO for VSCode
• [Docs] Fix error in internal commands list so it is visible again
• [Build] Disable unneeded 'page will reload' messages
• [Docs] Fix typo
• [Feature] Split Interfaces page into separate tab per interface
• [Build] Remove unneeded ifdef check
• [UI] Add support for collapsible sections on web pages
• [Interfaces] Add collapsible sections for I2C and SPI configuration
• [Build] Fix compiler warnings
• [UI] Fix minor display issue
• [UI] Add support for collapsible sections on web pages
• [Docs] Move Interfaces and Network docs to more appropriate locations
• [Docs] A few textual updates
• [P104] Improved Cyrillic font
• [UI] Improved css when used on small screens
• [UI] Improved css when used on small screens, more updates
• [UI] Improved css when used on small screens, more updates
• [P104] Update Cyrillic font doc screenshot
• [P104] Improved Ë and ë in the Cyrillic set to align with the other Cyrillic characters, and updated screenshot
• [UI] Improved css to have a pointer cursor and some spacing around the Details... label
• [UI] Fine-tune css for nicer menu tabs in dark mode
• [UI] Revert: Fine-tune css for nicer menu tabs in dark mode
• [UI] Fine-tune css for nicer menu sub-tabs (Interfaces)
• [UI] Fine-tune css fixes by @chromoxdor
• [UI] Compatibility css fix by @chromoxdor
• [Docs] Separate ESP32 and ESP8266 status
• [Docs] Separate status for ESP32 and ESP8266 on each page
• [Docs] Small update on excluded plugins
• [Docs] Small updates for supported chips
• [Docs] Small updates for supported chips
• [UI] Disable the Interfaces/Modbus subtab for now, as it's still TODO
• [Docs] Update documentation
• [Build] - Ignore clangd configuration file
• [Build] Add P047 (Moisture sensors) to Climate B, as mentioned in the docs
• [Advanced] Remove I2C ClockStretchLimit note
• [Network] Fix missing reload-indicator for Network Driver selector
• [Docs] Corrections for some recent changes
• [Docs] Expand description for creating a Custom build
• [Docs] Expand description for creating a Custom build, small typo fixes
• [Bugfix] [I2C] Connection-check failure didn't correctly disable the plugin
• [P180] [BusCmd] Allow rules variables in get/read and put/write (bus) commands
• [Build] Use pioarduino also on Github builds
• [Build][GH] Bump github-scripts plugin from v8 to v9
• [Build] Rename library.json for HeatpumpIR to avoid constant re-installs of (outdated version) IRremoteESP8266
• [P180] [BusCmd] Allow rules variables in read and put/write (bus) commands
• [P180] Process I2C commands synchronous when called from rules and other internal sources
• [P180] Update documentation
• [P180] [BusCmd] Allow rules variables in read and put/write (bus) commands
• [P180] Update documentation
• [Build] Create separate ESP32P4 binaries zip in release script
• [Fixes] %iswifi% report status value instead of boolean
• [Metrics] Add network traffic data TX/RX bytes and frames (Prometheus)
• [Docs] Fix typo
• [Ni]otifications] Add usesTLS flag to attributes and show in PluginList
• [Ni]otifications] Add usesTLS flag to attributes and show in PluginList
• [Network] Add define to select factory-default network adapter
• [Custom] Add some missing #define variables to Custom-sample.h
• [Network] Fix struct initialization
• [Settings] Fix waring for VariousBits_2
• [Network] Add size-check for NetworkDriverStruct
• [Custom] Add secure Cloudflare DNS entries
• [Docs] Fix missing column for LoopTimerSetAndRun
• [Build] Add C5 4MB Custom, 16MB MAX and 32 MB MAX32 and P4 32MB MAX32 builds
• [Build] Fix a few typos in 32MB board definitions
• [Build] Missed a typo in 16MB board definition
• [Dist] Update Espressif Flash Download tool to v3.9.10
• [Build] Update documentation
• [Network] Allow network interfaces to be enabled on factory reset
• [Network] Fix small typo
• [P180] Add documentation for TCA9554 I/O extender to control relays
• [P073] Fix build with P073_DEBUG and BUILD_NO_DEBUG enabled
• [Build] uv: Activate the PENV, then install missing requirements there
• [C016] Remove Experimental label, clean up initialization
• [Network] Initially collapse the Statistics section of the page
• [Metrics] Only export metrics when stats enabled
• [Build] Fix comment
• [Network] Allow to not default-enable WiFi interface
• Revert: [Metrics] Only export metrics when stats enabled
• [Docs] Fix link to I2C Bus settings
• [Console] Accept all valid ASCII characters for input
• [Build] Fix install-requirements script on Windows
• [UI] Update icon for Tools tab
• [P039] Fix for initialization error
• [SysVars] List variables numerically sorted
• [SysVars] Sort alphabetic values too (though they come in already sorted)
• [Docs] Suggest VSCode plugin TODO Highlight as Todo Tree doesn't work anymore without an external tool
• [Docs] Update VSCode plugin list
• [C005] Add note MQTT Auto Discovery not enabled in ESP8266 builds
• [Bugfix] Improve initialization of Task Interval
• [Bugfix] Partial revert for saving Task Interval
• [Bugfix] Include PLUGIN_FORMAT_USERVAR values for json updates
• [PLUGIN_FORMAT_USERVAR] Allow optional value display formatting by setting ParN[idx] to 1
• [P126][P129] Code optimization by moving ul2stringFixed to StringConverter_Numerical
• [P126][P129] Code optimization using ceilf instead of ceil, fix conditional compile error
• [Docs] Small typo P124
• [Bugfix] Limit humidity to 100% after applying temperature compensation
• [UI] DevicesPage: Hide Controllers if no values to send
• [Docs] Clarification about Collection builds including Normal plugin set, mention 32MB flash units

andbad (18):

• Update _P036_FrameOLED.ino
• Add new display configuration for 72x40 resolution
• Add case for pix72x40 resolution handling
• Update p036_resolution enum values
• Add new display option '72x40' to OLed_helper
• Fix enum values for p036_resolution
• Reorder resolution options in OLED frame
• Fix formatting of optionValues array in FrameOLED
• Reorder display size options in OLed_helper.cpp
• Remove and re-add 72x40 resolution configuration
• Update OLedFormSizes call to include element count
• Update OLedFormSizes to use optionsSize parameter
• Add default parameters to OLedFormSizes function
• Refactor FormSelectorOptions initialization
• Fix formatting of enum value for p036_resolution
• Fix formatting in P036_data_struct.h
• Add 72x40 OLED size to changelog
• Add 72x40 size

chromoxdor (35):

• Update for the HTTP Response Parser
• minor changes
• Update HTTPResponseParser.h
• Update HTTPResponseParser.h
• HttpResponseParser fix:prevent race condition
• [ESP8266] Enable CORS globally
• [CSS] Future CSS for Wi-Fi & Interfaces tab
• no need here
• [CSS] small update
• Update HTTPResponseParser.cpp
• Update HTTPResponseParser.cpp
• update colorcode files
• Update HTTPResponseParser.cpp
• FIX json?showpluginstats
• Update espeasy.min.js
• [ESP8266] Enable CORS globally (Update)
• [LOG] add filter
• [LOG] refining the filter
• [LOG] revert changes for plugin_sets
• [LOG] add filter field for older builds
• [LOG] reverting accidents
• [LOG] autoscroll fix, code reduction
• [LOG] Removed unnecessary code.
• [LOG+DevicePage_JS] refining the device page JS
• [JS] update WebStaticData.h
• [LOG] Fix for the minified JS
• Delete fetch_and_parse_log.min.js
• [PWM] Fix led flickering
• [PWM] undoing 16-bit changes
• Update Hardware_PWM.cpp
• [PWM] add ledcReadFreq(pin) for comparison
• [PWM] multipin state tracking
• Update Hardware_PWM.cpp
• [PWM] using ledcRead()
• [PWM] reduce function

dependabot[bot] (3):

• Bump actions/download-artifact from 7 to 8
• Bump actions/upload-artifact from 6 to 7
• Bump actions/checkout from 6 to 7

yosinn1-blip (2):

• docs: fix received spelling in docs
• docs: fix occurrence spelling in docs