Repository navigation
Osmo Client 1.6.2
Steadier Multiview with two cameras on a shared Wi-Fi network, Osmo Pocket 3 live view and gallery fixes, and a Record button and capture-mode menu on every Multiview tile. Found and tested with a real Osmo Nano and Osmo Pocket 3 streaming side by side.
Unofficial and independent: not affiliated with, endorsed or sponsored by DJI.
Fixed
- A Multiview camera froze while still showing as connected. With two cameras on one network, a command packet occasionally gets lost, and the camera then ignored every later command (an Osmo Pocket stops its video about 10 s after it last hears from the app). Lost commands are now sent again, so the picture and the controls keep going.
- Osmo Pocket 3: no picture, a frozen picture, or restarts in a loop after a reconnect. The Pocket 3 sends a keyframe only when its stream starts, and the stream keeps running between connections. A new connection now joins the running stream: the moving parts show at once and the whole picture builds up within a few seconds.
- Osmo Pocket 3 gallery sometimes showed no files. The camera can send the end of its file list before the list itself; the app now waits for the whole list. It also lists all the Pocket 3's files, not only the newest ones.
- Switching between cameras on a shared network: the previous camera always goes back to its own Wi-Fi, the network search no longer disturbs another camera the app is using, and joining the network no longer gives up when the camera takes a few seconds to answer.
New
- Multiview: every tile, the active camera's too, has its own Record button and a capture-mode menu (Video, Slow-mo, Timelapse, Hyperlapse, Low-Light / Super Night, Photo). A camera left in Photo mode is switched to Video when you record from Multiview.
- Gallery on a shared network: the Gallery says at once that it needs the camera's own Wi-Fi (on a shared network the camera lists its files but sends no thumbnails or downloads), with a button to switch.
- Diagnostics for live view problems: set
OSMO_VIDEO_DUMPto a folder before starting the app to save each camera session there; see Troubleshooting.
Install
See the README.