Open Claude in Chrome

Official Claude in Chrome gives you 58 blocked domains and two browsers.
Open Claude in Chrome gives you the whole web.
_{Clean-room reimplementation of Anthropic's browser extension. No blocklist. Any Chromium browser. 100% feature & performance parity.}
_{by noemica}

What's different · Install · Imitation learning · Architecture · Demo · How I built it

_{Watch Claude navigate Tinder, Reddit, and Robinhood — sites the official extension can't reach.}

The official Claude in Chrome extension gives Claude Code full browser automation — as long as you stay within Anthropic's allowlist of "safe" sites. Open Claude in Chrome is a clean-room reimplementation that strips the restrictions while keeping all 21 MCP tools and matching the official extension's performance.

What's Different

	Claude in Chrome	Open Claude in Chrome
Domain blocklist	58 blocked domains across 11 categories	No blocklist. Navigate anywhere.
Browser support	Chrome and Edge only	Any Chromium browser (Chrome, Edge, Brave, Arc, Opera, Vivaldi, etc.)
Source code	Closed source	Open source (MIT)
Tools	21 MCP tools	Same 21 MCP tools
Performance	Baseline	Identical

Blocked Domains in the Official Extension

Category	Blocked Sites
Banking	Chase, BofA, Wells Fargo, Citibank
Investing/Brokerage	Schwab, Fidelity, Robinhood, E-Trade, Wealthfront, Betterment
Payments/Transfers	PayPal, Venmo, Cash App, Zelle, Stripe, Square, Wise, Western Union, MoneyGram, Adyen, Checkout.com
BNPL	Klarna, Affirm, Afterpay
Neobanks/Fintech	SoFi, Chime, Mercury, Brex, Ramp
Crypto	Coinbase, Binance, Kraken, MetaMask
Gambling	DraftKings, FanDuel, Bet365, Bovada, PokerStars, BetMGM, Caesars
Dating	Tinder, Bumble, Hinge, Match, OKCupid
Adult	Pornhub, XVideos, XNXX
News/Media	NYT, WSJ, Barron's, MarketWatch, Bloomberg, Reuters, Economist, Wired, Vogue
Social Media	Reddit

Open Claude in Chrome has none of these restrictions.

Does it actually match the official extension?

Yes — and rather than assert it, here is a benchmark. Read the full study →

17 arms, each run over the same 12 held-out tasks from the REAL web-agent benchmark, same model and effort throughout (Sonnet, medium). What it found:

Parity, out of the box. The official extension and this harness, both cold, are statistically indistinguishable: 2.04 vs 1.95 min/task and 31.4 vs 32.6 turns, at p=0.44 and p=0.67 on a paired permutation test, with identical accuracy. They differ only in per-action overhead — 0.31s vs 0.12s per browser action, 2.7× less.
A higher ceiling. The best method in the study lands 23% fewer turns and 15% less time than the official extension, at 11/12 tasks passed against 8/12. Distil prior runs into a short per-site recipe, put it in the task prompt, and start from a warmed-up session.
What actually helps. Mounting raw prior experience on disk costs more than it returns (the agent spends 3.5× longer before its first browser action); compressing it into the prompt is what pays. Context is the dominant latency term at +1.9s per turn per 100k tokens, so more context is not free.
Recordings. This harness records raw, four-track browser traces and defers the analysis; Claude Cowork analyses each recording at capture time and keeps only the result. Distilled the same way by the same model, the raw recordings win both regimes — 6.6 fewer turns and 6.4 fewer minutes when the material has to fit in a prompt (p=0.012, p=0.008).

Caveats are in the writeup, not hidden: the task set saturates, one task's grading is ambiguous, and repeat runs of an identical configuration vary by 10–20%, so treat single-digit differences as noise.

Architecture

Default:

Claude Code <--stdio MCP--> mcp-server.js <--TCP--> native-host.js <--native messaging--> Extension <--> Browser

Code mode / hybrid (additive — mcp-server.js is reused unchanged as the upstream):

Claude Code <--stdio MCP--> server-{codemode,hybrid}.js
                              |  spawns + proxies via MCP
                              v
                            mcp-server.js (child) <--TCP--> native-host.js <--native messaging--> Extension <--> Browser
                              ^
                              |  HTTP tool-callback
                              |
                            workerd (wrangler dev sidecar)
                              |  Worker Loader → V8 isolate
                              v
                            sandboxed Worker runs LLM-written code

Three components:

Extension — Manifest V3 with CDP-based browser automation (all 21 tools)
MCP Server — Node.js process started by Claude Code, exposes tools via MCP
Native Messaging Host — Bridge between the MCP server and the extension

The codemode and hybrid servers add a fourth piece — a wrangler dev subprocess hosting a Cloudflare Worker that runs the LLM-generated code in a V8 isolate. The Worker calls back to the proxy over HTTP for actual tool execution, which is forwarded to the unchanged upstream mcp-server.js.

Installation

One flow, top to bottom, turns everything on — all 21 browser tools, execute_code, and the imitation-learning recorder.

Prerequisites

Node.js v18+
Any Chromium browser (Chrome, Edge, Brave, Arc, Opera, Vivaldi, etc.)
Claude Code v2.1.80+ (the recorder needs channels; browser automation alone works on v2.0.73+)
An OpenAI API key (used to transcribe recording narration)

Step 1: Install dependencies

npm install --prefix host
npm install --prefix host/codemode/worker

The second one is not optional: it provisions the sandbox that execute_code runs in. Skip it and the server falls back to fetching wrangler over the network on every cold start, which is the most common reason execute_code fails to come up.

Step 2: Load the extension

Go to chrome://extensions (or brave://extensions / edge://extensions)
Enable Developer mode
Click Load unpacked and select the extension/ directory
Copy the extension ID shown under the extension name

Step 3: Register native messaging

./install.sh <your-extension-id>

If you use multiple browsers, pass all IDs: ./install.sh <chrome-id> <brave-id> <arc-id>

Step 4: Restart your browser

Close all windows and reopen. The browser reads native messaging host configs on startup.

Step 5: Set your OpenAI key and enable the microphone

Right-click the extension icon → Options. Both of these are required before recording:

Paste your OpenAI key and click Save & validate (transcribes your narration).
Click Enable microphone and allow the browser prompt. The recorder captures audio in a background page that can't show a permission prompt itself, so you grant mic access once here; otherwise recordings capture no voice.

Step 6: Add the server to Claude Code

The hybrid server exposes everything: all 21 tools directly, execute_code alongside (the model picks per call), and the recording channel.

claude mcp add open-claude-in-chrome-hybrid -- node /absolute/path/to/host/codemode/server-hybrid.js

Find the absolute path with echo "$(pwd)/host".

Step 7: Launch with recording enabled

Channels are a research preview, so start Claude Code with the development flag (the name is the server from step 6):

claude --dangerously-load-development-channels server:open-claude-in-chrome-hybrid

Accept the one-time prompt and keep the session open — channels inject into a live interactive session, not claude -p. That's it: browser automation and recording are both on.

Verification

Start a new Claude Code session and run both checks.

1. Browser control — confirms the extension, native host and MCP server are wired up:

Navigate to reddit.com and take a screenshot

Reddit loads. No domain restriction.

2. The execute_code sandbox — confirms the wrangler sidecar is live:

In a single execute_code call: create a new tab, navigate to reddit.com, click
the first post, then go back to the listing and give me every post title except
the top three.

You should get the titles back from one tool call rather than a click-screenshot-click sequence. If the first attempt reports the sandbox is still starting, wait a few seconds and ask again — the sidecar boots in the background and the first call can arrive before it is ready. If it never comes up, see Keeping execute_code running.

Keeping `execute_code` running

Where it runs. execute_code evaluates your JavaScript in a Cloudflare Worker (a V8 isolate) hosted by a workerd sidecar that the MCP server starts with wrangler dev. That sidecar is a child process of the MCP server, which Claude Code itself spawns. There is no separate daemon, nothing to start by hand, and nothing that outlives Claude Code. It binds 127.0.0.1 on a free port, runs out of host/codemode/worker, and keeps its state in a per-variant, per-PID directory under your temp dir so the codemode and hybrid servers can run at the same time without racing each other.

Its lifetime is the MCP server's lifetime. It is spawned in the background at server start so MCP startup never blocks on it (budget: 60s to boot, typically 3–5s), and it is torn down on SIGTERM/SIGINT/exit and when Claude Code closes the stdio pipe. So restarting or reconnecting the MCP server always gives you a fresh sidecar.

There is no health check and no auto-restart. If the sidecar dies mid-session, execute_code stays down until the MCP server restarts. That is the behaviour to recognise: browser tools still work, only execute_code fails.

To keep it reliable:

Install the worker's dependencies (Step 1, or ./install.sh). Without host/codemode/worker/node_modules the server falls back to npx --yes wrangler, which needs the network on every cold start. This is the single most common cause of a sandbox that "sometimes isn't there".
Recover with /mcp in Claude Code. Reconnecting restarts the MCP server, which respawns the sidecar.

If that doesn't take, clear strays and reconnect:

pkill -f "server-hybrid|server-codemode"; pkill -f wrangler

Confirm it's up. The server logs [wrangler] Ready on http://127.0.0.1:<port> and then sandbox prewarmed in <n>ms. pgrep -fl wrangler should show one process per registered codemode/hybrid server.
Expect partial degradation, not failure. If the sandbox never comes up the 21 passthrough tools keep working and only execute_code errors, so a broken sidecar looks like "code mode stopped working", not "the browser stopped working".

Server variants

The hybrid server from Step 6 is the superset and the one the install steps assume. Two leaner variants exist if you want them, and they can coexist — register more than one.

Default — the 21 tools, nothing else:

claude mcp add open-claude-in-chrome -- node /absolute/path/to/host/mcp-server.js

Code mode — three tools: execute_code, screenshot, zoom. The model writes JS that calls chrome.* (the typed API for all 21 tools) in a sandboxed Cloudflare Worker, collapsing multi-step flows into one round trip:

claude mcp add open-claude-in-chrome-codemode -- node /absolute/path/to/host/codemode/server-codemode.js

Both of these carry the same sandbox as hybrid, so Keeping execute_code running applies to them too. Recording is only on the hybrid server.

Imitation Learning (Recording)

Teach Claude Code a browser task by doing it once. The extension records an expert rollout in two synchronized tracks — what you did (clicks, typing, scrolling, resolved to durable element anchors) and why (your spoken narration, transcribed) — across every tab, then hands the recording to a live Claude Code session over a channel. Claude reads the rollout and carries out the task, extrapolating to sister tasks. Enabled by the Installation flow above. Full design: docs/imitation-learning-alignment.html.

Record

Tell the session you're about to teach it something.
Click the toolbar icon to start. The badge walks a fixed pipeline: … (booting the mic, ~2.5s) → REC (talk now). Clicks during … are ignored.
Act and narrate out loud. Hold Alt while clicking to demonstrate an action without it firing (override/mask mode).
Click the icon again to stop. The badge shows … while the recording is transcribed and saved — clicks are ignored until the paste-able reference lands on your clipboard and the icon shows 📋. Only then is the icon live again. Paste the reference into Claude Code to point it at the recording. (If a Claude session with the channel is connected, it's also notified automatically and the tooltip says so — but the clipboard copy happens either way.)

Recorded sessions are browsable under the extension's Options page (all captured data, disclosed in layers), each with its own Copy reference button.

Verify recording works

The minimum end-to-end check, the recorder's equivalent of the reddit test above. Do it in a session launched per step 7.

In the Claude Code session, say: "I'm going to teach you something — wait for my signal."
Click the toolbar icon (badge shows REC). Navigate to any page, click a couple of things, and say two or three sentences out loud about what you're doing. Click the icon again to stop.
Confirm:
- The icon shows a 📋 and the reference is on your clipboard (paste it anywhere to check — it points at the recording folder).
- Options → Recorded sessions shows the session with events > 0, utterances > 0, a working audio player, a frame count, and your words under Narration.
- trace.json and images/ exist under ~/.config/open-claude-in-chrome/recordings/<recording_id>/.
- If a channel session is connected: a <channel … event="recording_complete" …> message appears and Claude acknowledges it and reads the trace.

If utterances is 0 or there's no audio, the mic wasn't enabled — redo Installation step 5. If nothing saved (no 📋), the native host isn't running — rerun ./install.sh <extension-id> and restart the browser. If no channel message appears, the session wasn't launched with the flag in step 7 (or a stale MCP server is running — pkill -f "server-hybrid" and reconnect with /mcp).

The real test (beyond the minimum): one narrated rollout of a task, then a sister task — same shape, different specifics — that Claude completes unaided from the recording. That's the proof the trace teaches rather than replays.

Status & limitations

The MCP channel, the recording_ack round-trip, the primary→client event routing, the transcription + track merge, and the native-host file writes are validated outside the browser; the in-browser capture, mic, and stop pipeline are wired and awaiting your live pass above. Known v1 choices:

The bundle is written by the native host (a Node process with filesystem access) to ~/.config/open-claude-in-chrome/recordings/<id>/ — trace.json, SCHEMA_v0.md, and images/. No chrome.downloads, so no OS save dialog, and it saves whether or not Claude is connected.
Four tracks: behavior (discrete actions), cursor (raw trajectory), images (240p frames captured on events, ≤1/sec), narration. All references and files are just data; the agent reads what it wants.
The viewer keeps small copies of the audio and frames in IndexedDB (the Options page can't read the on-disk files). Long recordings accumulate; a "keep last N" cleanup is a later refinement.
The capture layer is purpose-built (anchors + effects + heuristics), not a vendored rrweb.

Code Mode Test Client

A self-explanatory in-browser test suite for comparing default / code-mode / hybrid behavior across the kinds of flow they each should excel at. Lives in scratch/test-form/.

Serve it

cd scratch/test-form
python3 -m http.server 8765

Open http://localhost:8765/. The page is a four-challenge suite the agent works through end-to-end:

Single-Screen Form — everything visible in one screenshot. A model that captures the layout once should be able to batch all clicks + types + submit into a single round trip.
Multi-Step Wizard — three steps where step 2's fields depend on step 1's choice. Forces screenshot → action → screenshot, no batching across steps.
Repeat Submissions — the same Challenge 1 form, submitted three times with different values. Coordinates don't change; this is where pre-planned batching pays off most.
Click Sequence — a 3×3 grid plus a randomly-generated ordering. Every coordinate is visible at once; the model can batch nine sequential clicks from one screenshot.

Completion is non-ambiguous: the suite ends on a green "All Challenges Complete" banner with a per-challenge wall-clock table. A sticky progress header on every page shows the current challenge number and a ✓ for each completed one.

Run the experiment

YOU MUST NOT USE THE FOLLOWING TOOLS IN ANY CAPACITY: form_input || javascript_tool

TASK:
Open http://localhost:8765/ on a new tab and complete every challenge on the page. Follow the on-page instructions until you reach the "All Challenges Complete" banner.

For the MCP use only (not any of the other ocic MCPs): open-claude-in-chrome||open-claude-in-chrome-codemode||open-claude-in-chrome-hybrid

What to look for across the three MCP variants:

Challenge 1: ratio of screenshots to actions. Default tends to look-act-look-act; code-mode/hybrid should look once then batch.
Challenge 2: all three should look comparable — visual feedback is required between steps regardless of MCP.
Challenge 3: this is where the gap should open. One screenshot up front, then three batched form-fills in code-mode/hybrid vs. fresh look-act loops in default.
Challenge 4: similar. Coordinates fixed, sequence visible. Code mode batches the nine clicks; default clicks one at a time.

If the model still uses direct tools on the second submission, that's a signal the execute_code description needs tuning — see host/codemode/common.js (buildExecuteCodeDescription) and the per-server EXTRA_NOTES.

Results

Final Results Table

Available Tools

Every tool, its purpose, and its parity with the official Claude in Chrome extension:

✓ — in parity with Claude in Chrome (same interface, same behavior)
✗ — present but diverges (a stub, or a capability gap — see the notes)
(blank) — a new tool with no Claude in Chrome equivalent

Tool	Purpose	Parity
`tabs_context_mcp`	Get tab group context	✓
`tabs_create_mcp`	Create a new tab	✓
`tabs_close_mcp`	Close a tab	✓
`navigate`	Navigate to URL, back, forward	✓
`computer`	Mouse, keyboard, screenshot, zoom	✓
`read_page`	Accessibility tree with element refs	✓
`get_page_text`	Extract article/main text	✓
`find`	Find elements by text/attributes	✓
`form_input`	Set form values by ref	✓
`javascript_tool`	Execute JS in page context	✓
`read_console_messages`	Console output (filtered)	✓
`read_network_requests`	Network activity	✓
`resize_window`	Resize browser window	✓
`file_upload`	Attach local file(s) to a file input (by ref)	✓
`upload_image`	Attach a captured screenshot to a file input (by ref)	✗
`gif_creator`	GIF recording	✗
`shortcuts_list`	List shortcuts	✗
`shortcuts_execute`	Run a shortcut	✗
`switch_browser`	Hand off automation to another Chromium browser	✗
`execute_code`	Run sandboxed JS that drives every tool via `chrome.*`
`update_plan`	Present a plan for approval
`recording_ack`	Confirm an imitation-learning recording event
`retranscribe_recording`	Re-run transcription for a failed recording

Notes on the divergences (✗):

file_upload matches Claude in Chrome's interface (paths, ref, tabId) but does not restrict sources to session-shared paths — any absolute path on this machine is accepted.
upload_image is file-input-only (target it by ref); Claude in Chrome additionally supports dropping an image at a coordinate (e.g. Google Docs).
gif_creator, shortcuts_list, and shortcuts_execute are stubs.
switch_browser releases the shared runtime for ~15s so another browser can take over, in place of Claude in Chrome's list_connected_browsers / select_browser pair.

Claude in Chrome tools not yet supported in Open Claude in Chrome

browser_batch — run several tool calls in one round trip. Open Claude in Chrome instead offers execute_code, which runs arbitrary JS driving the same tools in one call.
list_connected_browsers — enumerate attached browsers.
select_browser — pick which browser drives automation.
upload_image drop-at-coordinate — Open Claude in Chrome's upload_image attaches to a file input by ref only.

Updating After Code Changes

No build step. All files are plain JavaScript. After pulling or editing code:

What changed	What to do
`extension/background.js`, `extension/content.js`, `extension/manifest.json`, or `extension/recorder/*`	Reload the extension: `brave://extensions` > click the reload icon
`host/mcp-server.js`	Kill stale servers and reconnect: `pkill -f "node.*mcp-server"` then `/mcp` in Claude Code
`host/codemode/.js` or `host/codemode/worker/`	Kill the codemode server: `pkill -f "server-codemode\|server-hybrid"` and `pkill -f wrangler`, then `/mcp` in Claude Code
`host/native-host.js`	Restart the browser (close all windows, reopen)
`install.sh` or native host name changed	Re-run `./install.sh <extension-id>`, restart browser, re-add MCP

Quick reset (nuclear option)

If things are broken and you're not sure why:

# 1. Kill all MCP servers
pkill -f "node.*mcp-server"

# 2. Re-run install
./install.sh <your-extension-id>

# 3. Restart browser (close all windows, reopen)

# 4. Reload extension in brave://extensions

# 5. Reconnect in Claude Code
# /mcp

Multiple Sessions

Multiple Claude Code sessions can share the same browser extension. The first session becomes the "primary" (owns the TCP port), and subsequent sessions connect as clients through the primary. All sessions can use the browser simultaneously.

If a session disconnects, kill stale servers and reconnect:

pkill -f "node.*mcp-server"
# then /mcp in each Claude Code session

Troubleshooting

Extension not connecting

Verify the extension is loaded and enabled
Check that ./install.sh was run with the correct extension ID
Restart the browser completely (all windows)
Verify the native messaging host manifest exists:
- Chrome (macOS): ~/Library/Application Support/Google/Chrome/NativeMessagingHosts/com.anthropic.open_claude_in_chrome.json
- Brave (macOS): ~/Library/Application Support/BraveSoftware/Brave-Browser/NativeMessagingHosts/com.anthropic.open_claude_in_chrome.json
- Edge (macOS): ~/Library/Application Support/Microsoft Edge/NativeMessagingHosts/com.anthropic.open_claude_in_chrome.json

MCP server not found

Use an absolute path:

claude mcp add open-claude-in-chrome -- node /absolute/path/to/host/mcp-server.js

"Browser extension is not connected"

The MCP server started but the native host hasn't connected. Try:

Open any webpage (wakes the service worker)
Check service worker logs: chrome://extensions > "Inspect views: service worker"
Verify host/native-host-wrapper.sh exists

Tools fail immediately after reconnect

Stale MCP server processes from previous sessions may be holding the port. Fix:

pkill -f "node.*mcp-server"

Then /mcp in Claude Code to reconnect. The fresh server will bind the port and accept the native host connection.

Port conflict

Default port is 18765. To change:

Create ~/.config/open-claude-in-chrome/config.json:
```
{ "port": 19000 }
```
Restart browser and Claude Code

License

MIT

Built by Sebastian Sosa (Noemica)

Name		Name	Last commit message	Last commit date
REAL		REAL
benchmark		benchmark
docs		docs
extension		extension
host		host
scratch		scratch
.gitignore		.gitignore
LICENSE		LICENSE
README.md		README.md
install.sh		install.sh
package-lock.json		package-lock.json
refresh-mcp.sh		refresh-mcp.sh
test-prompt.md		test-prompt.md

Uh oh!

Latest commit

History

Folders and files

Repository files navigation