NHD-C160100DiZ-FSW-FBW REV1C new driver ST75160i

[blankenshipbotron]

Hello All,
This display from Newhaven has a new driver NHD-C160100DiZ-FSW-FBW REV1C
I used the following in my code for REV1B for the ST7528 and it works good
U8G2_ST7528_NHD_C160100_F_HW_I2C u8g2(U8G2_R0, RST, SCL, SDA);

Please let me know if if anyone has used U8G2 with the ST75160 driver with
the NHD-C160100DiZ-FSW-FBW REV1C Display

https://newhavendisplay.com/content/specs/NHD-C160100DiZ-FSW-FBW.pdf
https://support.newhavendisplay.com/hc/en-us/articles/25842742613911-NHD-C160100DiZ-FSW-FBW-Rev1C-with-Arduino
https://newhavendisplay.com/content/docs/NHD-C160100DiZ-FSW-FBW_TransitionGuide.pdf

Thanks
mike

[blankenshipbotron]

I have NHD-C160100DiZ-FSW-FBW REV1C working, I had a coworker get it working with a ST75160 driver, remember REV1B will no longer work. According to him it requires a lot of changes, in any event if anyone needs it I can zip the package, sorry I do not understand the Git way to do this.

[olikraus]

Did you try the U8G2_ST75160_JM16096_F_HW_I2C constructor?
Maybe I could update the U8G2_ST75160_JM16096_F_HW_I2C device if I would have a picture how your display looks with the U8G2_ST75160_JM16096_F_HW_I2C. Maybe some constrast adjustments are required with setContrast() command.

[blankenshipbotron]

Hi Yes we tried U8G2_ST75160_JM16096_F_HW_I2C but could not get it to work. The mods my coworker did did work, but he said it may not be to the standard that you used. If needed I can send any of the files, I just need to know which one. He created a new contructor. mike

[olikraus]

I still think the changes to the U8G2_ST75160_JM16096_F_HW_I2C would be minimal to get it working.
At the moment I don't have time to work on this topic... maybe i get hands on such a device, then I could look into this by myself.
Anyhow, thanks for the info, that there is a new controller used by this display.

[blankenshipbotron]

Hi, I will try U8G2_ST75160_JM16096_F_HW_I2C again on my dev board and see if I can get anything. Thanks mike

…

________________________________ From: olikraus ***@***.***> Sent: Thursday, June 12, 2025 11:34 PM To: olikraus/u8g2 ***@***.***> Cc: Mike Blankenship ***@***.***>; Author ***@***.***> Subject: Re: [olikraus/u8g2] NHD-C160100DiZ-FSW-FBW REV1C new driver ST75160i (Issue #2619) You don't often get email from ***@***.*** Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> [https://avatars.githubusercontent.com/u/1084992?s=20&v=4]olikraus left a comment (olikraus/u8g2#2619)<#2619 (comment)> I still think the changes to the U8G2_ST75160_JM16096_F_HW_I2C would be minimal to get it working. At the moment I don't have time to work on this topic... maybe i get hands on such a device, then I could look into this by myself. Anyhow, thanks for the info, that there is a new controller used by this display. — Reply to this email directly, view it on GitHub<#2619 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASLJADYEQQXTT3T3ZHTN2SL3DJWFTAVCNFSM6AAAAABZWC5PBSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDSNRZGIZDQNZSG4>. You are receiving this because you authored the thread.Message ID: ***@***.***>