Exocolonist v1.1

Fixed some locations not sending, spread out friendship requirements so not as many are required early game.

Full Changelog: v1.0...v1.1

Exocolonist v1.0

Woo! Version 1.0!

Locations

• Unlocking each job is a location
• Picking up each consumable once is a location
• If enabled (friendsanity), every 10 friendship points is a location
• If enabled (datesanity), every character you date is a location
• If enabled (perkanity), every skill perk is a location
• Special events such as "Save Tammy" are locations

Items

• Progressive Years allow you to play another year. If you do not have enough Progressive Years, the game will end after glow of the highest year you have unlocked (you can always reload the autosave after you see the ending screen)
• Each job is an item you need to receive to do that activity
• If enabled (perksanity), each skill perk is an item. You will not be able to raise a skill past a perk you have received. So if you haven't received a Progressive Empathy Perk, you will not be able to level up your Empathy past 33
• Consumables are used as filler items

Other features

• Building rando causes building entrances to be randomized with each other. There is an option in the game settings to make the flag in front of the building match what is inside
• Character rando causes character's locations to be randomized with each other
• Universal Tracker works without a yaml

Todo

• Groundhogs are not cleared automatically or saved per slot

Full Changelog: v0.3.3...v1.0

Exopelago v0.3.3

Auto connect from save game data

Receive consumables sent since save was generated when reloading it

Exocolonist Setup Guide

Requirements

Exoloader

Exopelago

Exocolonist Mod Instructions

Windows

0. Back up your Groundhogs.json file located in C:\users\user\Documents\Exocolonist.
   THIS FILE WILL BE OVERWRITTEN and contains what achievements and characters you have unlocked on the main menu.
   This file is located in /path/to/your/steamapps/compatdata/1148760/pfx/drive_c/users/steamuser/Documents/Exocolonist in Linux.
1. Download Exoloader and extract it into your Exocolonist game folder.
2. Download Exopelago and extract it.
3. Copy the contents of Exopelago's CustomContent folder into the CustomContent folder in your game directory.
   The file structure should be Exocolonist/CustomContent/Exopelago/
4. Copy Exopelago.dll, Archipelago.Multiclient.net.dll, and Newtonsoft.json.dll into the BepInEx/plugins/ folder.
5. Launch the game.
6. Open the settings menu and click the buttons to set the Archipelago IP, port, slot, and password.
7. Click connect and enjoy!

Linux

1. Tell Steam to use compatibility mode.
   This game does have a native Linux release, but BeInEx needs the Windows release.
2. Launch the game at least once to build the Proton prefix.
3. Install and open Protontricks.
   If needed, select the version of Steam you want to use (native vs flatpak).
4. Select the game.
   It may take Protontricks a couple minutes to open the next window.
5. Click Select the default wineprifix and click OK.
6. Select Run winecfg and click OK.
7. Navigate to the Libraries tab.
8. In the textbox, enter winhttp and click Add.
9. Click OK at the bottom.
10. Follow Windows instructions and enjoy!

Full Changelog: v0.3.2...v0.3.3

Exopelago v0.3.2

Add option to match flags to randomized building entrances

Allow user to complete the Marz soysweet quest month 1 (talk to Tammy three times)

Attempt to fix groundhogs leaking from vanilla to modded

Fix perks not showing up on the left menu immediately when unlocked

Exocolonist Setup Guide

Requirements

Exoloader

Exopelago

Exocolonist Mod Instructions

Windows

0. Back up your Groundhogs.json file located in C:\users\user\Documents\Exocolonist.
   THIS FILE WILL BE OVERWRITTEN and contains what achievements and characters you have unlocked on the main menu.
   This file is located in /path/to/your/steamapps/compatdata/1148760/pfx/drive_c/users/steamuser/Documents/Exocolonist in Linux.
1. Download Exoloader and extract it into your Exocolonist game folder.
2. Download Exopelago and extract it.
3. Copy the contents of Exopelago's CustomContent folder into the CustomContent folder in your game directory.
   The file structure should be Exocolonist/CustomContent/Exopelago/
4. Copy Exopelago.dll, Archipelago.Multiclient.net.dll, and Newtonsoft.json.dll into the BepInEx/plugins/ folder.
5. Launch the game.
6. Open the settings menu and click the buttons to set the Archipelago IP, port, slot, and password.
7. Click connect and enjoy!

Linux

1. Tell Steam to use compatibility mode.
   This game does have a native Linux release, but BeInEx needs the Windows release.
2. Launch the game at least once to build the Proton prefix.
3. Install and open Protontricks.
   If needed, select the version of Steam you want to use (native vs flatpak).
4. Select the game.
   It may take Protontricks a couple minutes to open the next window.
5. Click Select the default wineprifix and click OK.
6. Select Run winecfg and click OK.
7. Navigate to the Libraries tab.
8. In the textbox, enter winhttp and click Add.
9. Click OK at the bottom.
10. Follow Windows instructions and enjoy!

Full Changelog: v0.3.1...v0.3.2

Exopelago v0.3.1

Made changes to installation instructions and changed the folder structure.

Exocolonist Mod Instructions

Windows

0. Back up your Groundhogs.json file located in C:\users\steamuser\Documents\Exocolonist.
   THIS FILE WILL BE OVERWRITTEN and contains what achievements and characters you have unlocked on the main menu.
   This file is located in /path/to/your/steamapps/compatdata/1148760/pfx/drive_c/users/steamuser/Documents/Exocolonist in Linux.
1. Download Exoloader and extract it into your Exocolonist game folder.
2. Download Exopelago and extract it.
3. Copy the contents of Exopelago's CustomContent folder into the CustomContent folder in your game directory.
   The file structure should be Exocolonist/CustomContent/Exopelago/
4. Copy Exopelago.dll, Archipelago.Multiclient.net.dll, and Newtonsoft.json.dll into the BepInEx/plugins/ folder.
5. Launch the game.
6. Open the settings menu and click the buttons to set the Archipelago IP, port, slot, and password.
7. Click connect and enjoy!

Linux

1. Tell Steam to use compatibility mode.
   This game does have a native Linux release, but BeInEx needs the Windows release.
2. Launch the game at least once to build the Proton prefix.
3. Install and open Protontricks.
   If needed, select the version of Steam you want to use (native vs flatpak).
4. Select the game.
   It may take Protontricks a couple minutes to open the next window.
5. Click Select the default wineprifix and click OK.
6. Select Run winecfg and click OK.
7. Navigate to the Libraries tab.
8. In the textbox, enter winhttp and click Add.
9. Click OK at the bottom.
10. Follow Windows instructions and enjoy!

Exopelago v0.3.0

Now with fewer bugs and more confusion!

Added the ability to force card battles to always be on as a yaml setting.

Added building rando.

• Unfortunately exiting the building that leads to expeditions will always bring you back to the expeditions hut.
• This also involved deleting the glow gate to prevent softlocks where you get stuck at the expeditions hut outside during glow with no way to rest.
• The glow gate is now interactable during months 1 and 2.

Added character shuffle, now characters on the main map change places with each other.

• All Stratos characters are available from the start

Groundhogs are now properly separated between AP worlds, even if you have multiple slots in the same world.

Fixed a lot of logic issues.

Full Changelog: v0.2.0...v0.3.0

Exopelago v0.2.0

New instructions for this release, AP connection is now in the settings menu.

Exocolonist Setup Guide

Requirements

Exoloader
Exopelago

Instructions

Windows

1. Download Exoloader and extract it.
2. Copy the contents of the Exocolonist folder into your Exocolonist game directory.
3. Download Exopelago and extract it.
4. Copy the contents of the Exoloader folder into the CustomContent folder.
   The file structure should be Exocolonist/CustomContent/Exopelago/
5. Copy Exopelago.dll, Archipelago.Multiclient.net.dll, and Newtonsoft.json.dll into the BepInEx/plugins/ folder.
6. Launch the game.
7. Open the settings menu and click the buttons to set the Archipelago IP, port, slot, and password.
8. Click connect and enjoy!

Linux

1. Tell Steam to use compatibility mode.
   This game does have a native Linux release, but BeInEx needs the Windows release.
2. Launch the game at least once to build the Proton prefix.
3. Install and open Protontricks.
   If needed, select the version of Steam you want to use (native vs flatpak).
4. Select the game.
   It may take Protontricks a couple minutes to open the next window.
5. Click Select the default wineprifix and click OK.
6. Select Run winecfg and click OK.
7. Navigate to the Libraries tab.
8. In the textbox, enter winhttp and click Add.
9. Click OK at the bottom.
10. Follow Windows instructions and enjoy!

Exopelago v0.1.1

Perksanity bugfix and documentation update

There are likely logic bugs and possible game bugs, please create an issue or message the Exocolonist thread in the AP Discord if you find any!

Setup

Requirements

Exoloader
Exopelago

Instructions

Windows

1. Download Exoloader and extract it.
2. Copy the contents of the Exocolonist folder into your Exocolonist game directory.
3. Download Exopelago and extract it.
4. Copy the contents of the Exoloader folder into the CustomContent folder.
   The file structure should be Exocolonist/CustomContent/Exopelago/
5. Copy Exopelago.dll, Archipelago.Multiclient.net.dll, and Newtonsoft.json.dll into the BepInEx/plugins/ folder.
6. Copy connectionInfo.json into your Exocolonist folder next to Exocolonist.exe.
7. Edit connectionInfo.json with your server, port, slot name, and password.
8. Launch the game and enjoy!

Linux

1. Tell Steam to use compatibility mode.
   This game does have a native Linux release, but BeInEx needs the Windows release.
2. Launch the game at least once to build the Proton prefix.
3. Install and open Protontricks.
   If needed, select the version of Steam you want to use (native vs flatpak).
4. Select the game.
   It may take Protontricks a couple minutes to open the next window.
5. Click Select the default wineprifix and click OK.
6. Select Run winecfg and click OK.
7. Navigate to the Libraries tab.
8. In the textbox, enter winhttp and click Add.
9. Click OK at the bottom.
10. Follow Windows instructions and enjoy!

What's randomized?

Locations

Every job you can unlock is a location.

Friendsanity

If enabled, each multiple of 20 friendship points for each character is a check.

Datesanity

If enabled, dating each character is a check.

Perksanity

If enabled, each skill perk is a check. Additionally, skills will be locked so you cannot progress past a perk you don't have. As an example, if you have perception perk 1 you can level your perception to 66. But if you have no perks, you can only level the skill to 33.

Special events

Right now the special events are

• Save Tammy
• Save Tonin
• Rescue Eudicot
• Save Mom
• Save Dad
• Save Hal
• Adopt Vriki
• Adopt Hopeye
• Adopt Robot
• Adopt Unisaur
• Become Governor
• Help Marz become Governor

Items

You can receive job unlocks and consumables to use in card battles or as gifts for characters. If perksanity is enabled, you will also receive progressive skill perks.

Progressive Years

In order to age up you will need to receive a progressive year. For example, if you only have 3 progressive years the game will end (but not goal) when you age up to 14.

Exopelago v0.1.0

The first alpha release of Exopelago for the game I Was a Teenage Exocolonist.

There are likely logic bugs and possible game bugs, please create an issue or message the Exocolonist thread in the AP Discord if you find any!

Setup

Requirements

Exoloader
Exopelago

Instructions

Windows

1. Download Exoloader and extract it.
2. Copy the contents of the Exocolonist folder into your Exocolonist game directory.
3. Download Exopelago and extract it.
4. Copy the contents of the Exoloader folder into the CustomContent folder.
   The file structure should be Exocolonist/CustomContent/Exopelago/
5. Copy Exopelago.dll, Archipelago.Multiclient.net.dll, and Newtonsoft.json.dll into the BepInEx/plugins/ folder.
6. Copy connectionInfo.json into your Exocolonist folder next to Exocolonist.exe.
7. Edit connectionInfo.json with your server, port, slot name, and password.
8. Launch the game and enjoy!

Linux

1. Tell Steam to use compatibility mode.
   This game does have a native Linux release, but BeInEx needs the Windows release.
2. Launch the game at least once to build the Proton prefix.
3. Install and open Protontricks.
   If needed, select the version of Steam you want to use (native vs flatpak).
4. Select the game.
   It may take Protontricks a couple minutes to open the next window.
5. Click Select the default wineprifix and click OK.
6. Select Run winecfg and click OK.
7. Navigate to the Libraries tab.
8. In the textbox, enter winhttp and click Add.
9. Click OK at the bottom.
10. Follow Windows instructions and enjoy!

What's randomized?

Locations

Every job you can unlock is a location.

Friendsanity

If enabled, each multiple of 20 friendship points for each character is a check.

Datesanity

If enabled, dating each character is a check.

Perksanity

If enabled, each skill perk is a check. Additionally, skills will be locked so you cannot progress past a perk you don't have. As an example, if you have perception perk 1 you can level your perception to 66. But if you have no perks, you can only level the skill to 33.

Special events

Right now the special events are

• Save Tammy
• Save Tonin
• Rescue Eudicot
• Save Mom
• Save Dad
• Save Hal
• Adopt Vriki
• Adopt Hopeye
• Adopt Robot
• Adopt Unisaur
• Become Governor
• Help Marz become Governor

Items

You can receive job unlocks and consumables to use in card battles or as gifts for characters. If perksanity is enabled, you will also receive progressive skill perks.