Repository navigation
Releases
Draftwright 0.5.0-rc13
Draftwright 0.5.0-rc13
This is a prerelease for evaluation. Inspect generated drawings, lint, and requirement reports before using them for manufacturing.
Since rc12
- Added per-view hidden-line visibility for principal and isometric views. A declared visible-only isometric keeps the orientation view without hidden-edge clutter, while the default remains unchanged. #2234
- Added a reproducible synthetic quotation-sheet comparison with an axial blind-hole section, supplied metadata, and requirement and layout diagnostics for #2233.
Known limitation
The original quotation STEP file and edited source were not available, so the comparison validates the declared workflow on a public synthetic turned part, not the exact customer drawing.
Install after publication with python -m pip install --pre draftwright==0.5.0rc13.
Draftwright 0.5.0-rc12
Draftwright 0.5.0-rc12
This is a prerelease for evaluation. Inspect generated drawings, lint, and requirement reports before using them for manufacturing.
Since rc11
- Fixed AP242 internal-thread PMI association when generic presentation callouts refer to different holes. Part-level prose no longer claims unrelated faces; unique M2/M4 designations can reconcile with their own structured face references, and ambiguous cases fail closed with diagnostics. #2232
Known limitation
- If multiple holes share the same thread designation and the producer does not explicitly link each descriptive property to its own shape aspect, prose ownership remains ambiguous and is reported rather than guessed.
Install after publication with python -m pip install --pre draftwright==0.5.0rc12.
Draftwright 0.5.0-rc11
Draftwright 0.5.0-rc11
This is a prerelease for evaluation. Inspect generated drawings, lint, and requirement reports before using them for manufacturing.
Since rc10
- Improved AP242 PMI completeness and placement: alternate datum views, source dimensions before generated pattern pitch, and removal of duplicate overall/coaxial-location dimensions. The Specify plate's previously missing 75 +0.1/0 and basic 60 callouts and position frames were verified on main. #2202, #2204, #2213
- Added editor-facing declaration lookup and annotation label boxes for picking. #2215
- Expanded bounded, coordinate-free layout overrides for authored dimensions and feature callouts, including side choices, OD/step/envelope/pocket/height lanes, and exact X/Y hole or pattern location lanes. Infeasible requests are reported rather than silently moved. #2216, stack #2229
- Added an explicit lint-free export option for disposable previews and an opt-in fixed-ink mesh cache for repeated interactive builds. Default exports still lint. On one Specify PMI plate replay, the cache reduced warm build time from 39.146 s to 26.540 s with matching annotation names and lint codes. #2214, #2217
Known limitations
- A requested annotation corridor is not guaranteed to fit; check reported drops and the finished drawing. Other recognized requirements can still be withheld or dropped with explicit diagnostics.
- Per-view incremental relayout is not included; it remains scoped under #2208.
Install after publication with python -m pip install --pre draftwright==0.5.0rc11.
Draftwright 0.5.0-rc9
Draftwright 0.5.0-rc9
This is a prerelease for evaluation. Inspect generated drawings and their lint and requirement reports before using them for manufacturing.
Since rc8
- Complete strip annotation ink must stay within the sheet. An authored PMI dimension whose witness lines would leave the page is dropped with a diagnostic instead of being drawn off-sheet; this also lets other authored dimensions use the freed space. #2191
- The authored pocket-wall location
75 +0.1/0is extracted and drawn from a proved face witness. Bore-axis location60is extracted from a plane-to-axis witness, and cylindrical position frames target the true face-on view. These changes improve source fidelity but do not guarantee every PMI item fits. #2193, #2194 - Automatic PMI layout skips scale trials whose bare principal projections cannot fit on the page and avoids a measured repack caused solely by a late table. There is no fixed runtime cap or relaxed completeness check. The #2192 Specify plate completed in 94.5 seconds in the measured run, versus the roughly ten minutes previously observed, and still reports four source-PMI drops. #2197
Known limitations
- The #2192 Specify plate remains incomplete: some authored PMI still cannot be placed and is reported, despite the corrected extraction and faster layout. #2192
- Other limitations listed in rc8 have not been claimed resolved by this release.
Install after publication with python -m pip install --pre draftwright==0.5.0rc9.
Draftwright 0.5.0-rc10
Draftwright 0.5.0-rc10
This is a prerelease for evaluation. Inspect generated drawings, lint, and requirement reports before using them for manufacturing.
Since rc9
- Avoid duplicate planned bore-axis locations when authored AP242 PMI already specifies the same physical location. #2201
- Preserve supported AP242 basic dimensions as boxed ink; unsupported or conflicting cases are reported rather than silently drawn as ordinary dimensions. #2200
- Let imported PMI dimensions use space held by a provisional section that will not render. On the Specify fixture, two of three previously missing authored 40 locations now place; one remains reported. #2203
- Recover A3 2:1 for the supplied PMI-enabled spindle after an optional section drops, and interleave generated datum-to-step dimensions with imported PMI in measured-span order. #2205
Known limitations
- The Specify plate still has a reported authored PMI no-room drop; #2192 remains open. The spindle fixture still has two recognized but missing step-length requirements. This RC does not claim either drawing is complete.
- Other limitations listed in rc9 remain unless addressed above.
Install after publication with python -m pip install --pre draftwright==0.5.0rc10.
Draftwright 0.5.0-rc8
Draftwright 0.5.0-rc8
This is a prerelease for evaluation. Inspect generated drawings and their lint and requirement reports before using them for manufacturing.
Since rc7
- Offset planar PMI witnesses: An AP242 dimension between parallel face groups is measured along their proved common normal, so sideways-offset face centres no longer make a valid size look diagonal. Unproved support and mismatched values still fail closed. #2186
- Authored dimension precedence: AP242 sizes and locations cover matching planned dimensions instead of being printed twice. On a turned profile, an authored baseline determines the scheme and uncovered shoulders are dimensioned from the same reference end. Bore callouts retain imported nominal precision or fit wording where the feature owner is proved.
Drawing.dimension_sources()exposes the source of each placed measurement. Ambiguous matches remain visible to lint. #2187
Known limitations
- A Document acquired with PMI annotations can still carry source AP242 tolerance overrides into a member whose PMI mode is
offorreport. #2188 - The reporter's private AP242 STEP specimens for these two fixes were unavailable for direct replay. The regressions use synthetic OCC geometry, authored IR, both planar extraction paths, finished drawings, and generated Sheet round trips.
- The CTC-01 automatic PMI arrangements remain incomplete; inspect their reported missing requirements.
- A forced A3 1:2 permissive GRM-03 document sheet can still omit datum A/B symbols when their source-normal corridors cannot fit. It retains the authored datum explanation in GENERAL NOTES and reports
pmi_dropped. - The dense CTC04 specimen yields an invalid drawing: the 150° angular annotation conflicts with two hole callouts, and some required outcomes cannot fit. #2167
- Dense CTC02 and CTC04 builds take longer than in rc3. #2166
- A STEP file that declares an older Part21 encoding level but contains raw UTF-8 text can prevent the Part21 parser from extracting available PMI. The drawing report marks this as an error. #1958
Install after publication with python -m pip install --pre draftwright==0.5.0rc8.
Draftwright 0.5.0-rc7
Draftwright 0.5.0-rc7
This is a prerelease for evaluation. Inspect generated drawings and their lint and requirement reports before using them for manufacturing.
Since rc6
- Imported datum placement: A datum tied to a side-view corridor that does not exist no longer aborts
build_drawing(..., pmi="annotate"). If no legal placement remains, the datum is reported aspmi_droppedwhile other PMI continues through the drawing. The regression test reproduced the crash before the fix and passed afterward; the reporter's private STEP file was unavailable for direct replay. #2183 - Validation: Two slow-test expectations were updated to match the current automatic view selection and GRM-03 A4 layout. The PR's required checks passed on its final head. #2183
Known limitations
- The CTC-01 automatic PMI arrangements remain incomplete; inspect their reported missing requirements.
- A forced A3 1:2 permissive GRM-03 document sheet can still omit datum A/B symbols when their source-normal corridors cannot fit. It retains the authored datum explanation in GENERAL NOTES and reports
pmi_dropped. - The dense CTC04 specimen yields an invalid drawing: the 150° angular annotation conflicts with two hole callouts, and some required outcomes cannot fit. #2167
- Dense CTC02 and CTC04 builds take longer than in rc3. #2166
- A STEP file that declares an older Part21 encoding level but contains raw UTF-8 text can prevent the Part21 parser from extracting available PMI. The drawing report marks this as an error. #1958
Install after publication with python -m pip install --pre draftwright==0.5.0rc7.
Draftwright 0.5.0-rc6
Draftwright 0.5.0-rc6
This is a prerelease for evaluation. Inspect generated drawings and their lint and requirement reports before using them for manufacturing.
Since rc5
- CTC-01 pitch and PMI: A single pitch gap is labelled with its value, without a
1×prefix. Source-specific AP242 diameter requirements stay attached to their physical pattern members, while the generic pattern callout retains count, THRU state, pitch, and location without repeating those sizes. #2173 · #2174 - GRM-03 manufacturing PMI: The STEP-stated knurl maximum diameter appears in both the manufacturing row and its linked leader. Source-scoped edge condition and face finish requirements appear with their STEP identity and are independently checked against the final drawing. #2179 · #2180
- GRM-03 A4 layout: Automatic layout can use A4 at 5:1 to keep all 17 required annotations, including the side-hole callout. Datum symbols stay local to their source faces when possible; the C0.5 label is kept clear of the narrow shaft; detail captions are separated from nearby callouts. Forced A4 at 2:1 reports remaining cramped conditions. #2181
- Validation: CTC-01 slow tests now follow the member-specific PMI identity and its generated Sheet script. #2178
Known limitations
- The CTC-01 automatic PMI arrangements remain incomplete; inspect their reported missing requirements.
- A forced A3 1:2 permissive GRM-03 document sheet can still omit datum A/B symbols when their source-normal corridors cannot fit. It retains the authored datum explanation in GENERAL NOTES and reports
pmi_dropped. - The dense CTC04 specimen yields an invalid drawing: the 150° angular annotation conflicts with two hole callouts, and some required outcomes cannot fit. #2167
- Dense CTC02 and CTC04 builds take longer than in rc3. #2166
- A STEP file that declares an older Part21 encoding level but contains raw UTF-8 text can prevent the Part21 parser from extracting available PMI. The drawing report marks this as an error. #1958
Install after publication with python -m pip install --pre draftwright==0.5.0rc6.
Draftwright 0.5.0-rc5
Draftwright 0.5.0-rc5
This is a prerelease for evaluation. Inspect generated drawings and their lint and requirement reports before using them for manufacturing.
Since rc4
- GRM-03 PMI: A structured external M3 thread can now attach to a turned tip when an evidenced 45° chamfer shortens its cylindrical face. Imported datum symbols attach to proven source faces, with planar leaders normal to the referenced surface and cylindrical attachments on the silhouette. #2169
- A4 layout: Sparse, annotation-heavy drawings use a demand-guided annotation profile in the normal single-build path. The GRM-03 PMI A4 example places the M3 requirement and its source-attached datum leader. #2169
- Release validation: The fixed A3 permissive-scale document test checks that a source-authored datum note survives when source-normal datum symbols cannot fit. The CTC01 lane canary's whole-test budget now covers its two individually bounded script runs. #2170 · #2171
Known limitations
- A forced A3 1:2 permissive GRM-03 document sheet can still omit datum A/B symbols when their source-normal corridors cannot fit. It retains the authored datum explanation in GENERAL NOTES and reports
pmi_dropped. Use the drawing's lint and requirement report to identify such incomplete results. - The dense CTC04 specimen yields an invalid drawing: the 150° angular annotation conflicts with two hole callouts, and some required outcomes cannot fit. #2167
- Dense CTC02 and CTC04 builds take longer than in rc3. #2166
- A STEP file that declares an older Part21 encoding level but contains raw UTF-8 text can prevent the Part21 parser from extracting available PMI. The drawing report marks this as an error. #1958
Install after publication with python -m pip install --pre draftwright==0.5.0rc5.
Draftwright 0.5.0-rc4
Draftwright 0.5.0-rc4
This is a prerelease for evaluation. Inspect generated drawings and their lint and requirement reports before using them for manufacturing.
Since rc3
- STEP intent reaches the drawing: Source material and general tolerance now populate the title block. Structured tapped-hole, thread, and knurl requirements survive import and are drawn, including through taps and turned external threads. Blind end-face tap drills gain their required callouts. #2160 · #2163
- More faithful annotations: Flatness values keep their stated precision, diametral position zones retain the diameter symbol, required datums can be placed, and repeated physical diameters or coincident hole patterns have distinct, traceable claims. #2159 · #2161 · #2165
- Drawing policy: Required feature callouts take priority over optional ink, and dimension ladders use exact placed ink for clearance. #1919 · #1809
- Dependency and maintainability: Quiddity 0.3.10 fixes thin-wall recognition failures. The engine also gained a shared lint driver, a canonical feature-family table, typed handoffs, smaller functions, and stronger test-shape guards. #2141 · #2142–#2155
- Release validation: The slow corpus checks now verify the current Quiddity 0.3.10 pattern/provenance behavior and report dense-layout failure explicitly. #2168
Known limitations
- The dense CTC04 specimen now yields an invalid drawing: the reported 150° angular annotation conflicts with two hole callouts, and some required outcomes cannot fit. The scale decision and lint name both hard overlaps and the missing requirements. #2167
- Dense CTC02 and CTC04 builds take longer than in rc3. The affected post-merge tests have a bounded 15-minute limit while the regression is investigated. #2166
- A STEP file that declares an older Part21 encoding level but contains raw UTF-8 text can prevent the Part21 parser from extracting otherwise available PMI. The drawing report marks this as an error. #1958
- On the GRM-03 PMI trial, an M3 external thread whose authored length includes a tip chamfer remains a raw PMI requirement, and datum A can be drawn with a leader that is not normal to its referenced face. Local corrections are under review and are not part of this prerelease.
Install after publication with python -m pip install --pre draftwright==0.5.0rc4.