chore(deps): bump the github-actions group with 8 updates

[dependabot]

Bumps the github-actions group with 8 updates:

Package	From	To
github/codeql-action/init	4.36.2	4.37.6
github/codeql-action/autobuild	4.36.2	4.37.6
github/codeql-action/analyze	4.36.2	4.37.6
actions/configure-pages	5	6
actions/upload-pages-artifact	4	5
actions/deploy-pages	4	5
actions/setup-node	6	7
millionco/react-doctor	2.2.2	2.2.8

Updates github/codeql-action/init from 4.36.2 to 4.37.6

Release notes

Sourced from github/codeql-action/init's releases.

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

v4.37.3

No user facing changes.

v4.37.2

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

v4.37.1

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

v4.37.0

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

v4.36.3

No user facing changes.

Changelog

Sourced from github/codeql-action/init's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

... (truncated)

Commits

• 5595cca Merge pull request #4071 from github/update-v4.37.6-6a9359a1b
• ec9c757 Add change note for PR 4070
• 45c8742 Update changelog for v4.37.6
• 6a9359a Merge pull request #4070 from github/mbg/remote-address/change-file-default
• 065cdc0 Change DEFAULT_CONFIG_FILE_NAME
• f99dd5a Merge pull request #4066 from github/dependabot/npm_and_yarn/js-yaml-5.2.2
• 1804b21 Merge pull request #4068 from github/mergeback/v4.37.5-to-main-d1ba80a1
• 3020a2f Rebuild
• 93c3a5a Update changelog and version after v4.37.5
• d1ba80a Merge pull request #4067 from github/update-v4.37.5-1cd4d01d5
• Additional commits viewable in compare view

Updates github/codeql-action/autobuild from 4.36.2 to 4.37.6

Release notes

Sourced from github/codeql-action/autobuild's releases.

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

v4.37.3

No user facing changes.

v4.37.2

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

v4.37.1

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

v4.37.0

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

v4.36.3

No user facing changes.

Changelog

Sourced from github/codeql-action/autobuild's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

... (truncated)

Commits

• 5595cca Merge pull request #4071 from github/update-v4.37.6-6a9359a1b
• ec9c757 Add change note for PR 4070
• 45c8742 Update changelog for v4.37.6
• 6a9359a Merge pull request #4070 from github/mbg/remote-address/change-file-default
• 065cdc0 Change DEFAULT_CONFIG_FILE_NAME
• f99dd5a Merge pull request #4066 from github/dependabot/npm_and_yarn/js-yaml-5.2.2
• 1804b21 Merge pull request #4068 from github/mergeback/v4.37.5-to-main-d1ba80a1
• 3020a2f Rebuild
• 93c3a5a Update changelog and version after v4.37.5
• d1ba80a Merge pull request #4067 from github/update-v4.37.5-1cd4d01d5
• Additional commits viewable in compare view

Updates github/codeql-action/analyze from 4.36.2 to 4.37.6

Release notes

Sourced from github/codeql-action/analyze's releases.

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

v4.37.3

No user facing changes.

v4.37.2

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

v4.37.1

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

v4.37.0

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

v4.36.3

No user facing changes.

Changelog

Sourced from github/codeql-action/analyze's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

... (truncated)

Commits

• 5595cca Merge pull request #4071 from github/update-v4.37.6-6a9359a1b
• ec9c757 Add change note for PR 4070
• 45c8742 Update changelog for v4.37.6
• 6a9359a Merge pull request #4070 from github/mbg/remote-address/change-file-default
• 065cdc0 Change DEFAULT_CONFIG_FILE_NAME
• f99dd5a Merge pull request #4066 from github/dependabot/npm_and_yarn/js-yaml-5.2.2
• 1804b21 Merge pull request #4068 from github/mergeback/v4.37.5-to-main-d1ba80a1
• 3020a2f Rebuild
• 93c3a5a Update changelog and version after v4.37.5
• d1ba80a Merge pull request #4067 from github/update-v4.37.5-1cd4d01d5
• Additional commits viewable in compare view

Updates actions/configure-pages from 5 to 6

Release notes

Sourced from actions/configure-pages's releases.

v6.0.0

Changelog

• upgrade to node 24 @​salmanmkc (#186)
• Upgrade IA Publish @​Jcambass (#165)
• Add workflow file for publishing releases to immutable action package @​Jcambass (#163)
• pin draft release version @​YiMysty (#162)
• Bump espree from 9.6.1 to 10.1.0 @​dependabot (#160)
• Bump eslint-config-prettier from 8.8.0 to 9.1.0 @​dependabot (#143)
• Be more friendly to Dependabot @​yoannchaudet (#158)
• Bump eslint-plugin-github from 4.10.2 to 5.0.1 @​dependabot (#154)
• Bump braces from 3.0.2 to 3.0.3 in the npm_and_yarn group @​dependabot (#156)
• Bump undici from 5.28.3 to 5.28.4 @​dependabot (#145)

See details of all code changes since previous release.

Commits

• 45bfe01 Merge pull request #186 from salmanmkc/node24
• d8770c2 Update Node version from 20 to 24 in action.yml
• cb8a1a3 upgrade to node 24
• d560657 Merge pull request #165 from actions/Jcambass-patch-1
• 35e0ac4 Upgrade IA Publish
• 1dfbcbf Merge pull request #163 from actions/Jcambass-patch-1
• 2f4f988 Add workflow file for publishing releases to immutable action package
• 0d7570c Merge pull request #162 from actions/pin-draft-release-verssion
• 3ea1966 pin draft release version
• aabcbc4 Merge pull request #160 from actions/dependabot/npm_and_yarn/espree-10.1.0
• Additional commits viewable in compare view

Updates actions/upload-pages-artifact from 4 to 5

Release notes

Sourced from actions/upload-pages-artifact's releases.

v5.0.0

Changelog

• Update upload-artifact action to version 7 @​Tom-van-Woudenberg (#139)
• feat: add include-hidden-files input @​jonchurch (#137)

See details of all code changes since previous release.

Commits

• fc324d3 Merge pull request #139 from Tom-van-Woudenberg/patch-1
• fe9d4b7 Merge branch 'main' into patch-1
• 0ca1617 Merge pull request #137 from jonchurch/include-hidden-files
• 57f0e84 Update action.yml
• 4a90348 v7 --> hash
• 56f665a Update upload-artifact action to version 7
• f7615f5 Add include-hidden-files input
• See full diff in compare view

Updates actions/deploy-pages from 4 to 5

Release notes

Sourced from actions/deploy-pages's releases.

v5.0.0

Changelog

• Update Node.js version to 24.x @​salmanmkc (#404)
• Add workflow file for publishing releases to immutable action package @​Jcambass (#374)
• Bump braces from 3.0.2 to 3.0.3 in the npm_and_yarn group across 1 directory @​dependabot (#360)
• Make the rebuild dist workflow work nicer with Dependabot @​yoannchaudet (#361)
• Bump the non-breaking-changes group across 1 directory with 3 updates @​dependabot (#358)
• Delete repeated sentence @​garethsb (#359)
• Update README.md @​tsusdere (#348)
• Bump the non-breaking-changes group with 4 updates @​dependabot (#341)
• Remove error message for file permissions @​TooManyBees (#340)

---

See details of all code changes since previous release.

⚠️ For use with products other than GitHub.com, such as GitHub Enterprise Server, please consult the compatibility table.

v4.0.5

Changelog

• On API error, the error message will surface the API request ID @​TooManyBees (#324)
• Bump the non-breaking-changes group with 2 updates @​dependabot (#318)
• Bump the non-breaking-changes group with 1 update @​dependabot (#316)
• Bump the non-breaking-changes group with 3 updates @​dependabot (#314)
• Bump release-drafter/release-drafter from 5.25.0 to 6.0.0 @​dependabot (#311)

---

See details of all code changes since previous release.

⚠️ For use with products other than GitHub.com, such as GitHub Enterprise Server, please consult the compatibility table.

v4.0.4

Changelog

• Update api-client.js @​lmammino (#295)
• fix typo: compatibilty -> compatibility @​SimonSiefke (#298)
• Bump @​actions/artifact from 2.0.1 to 2.1.1 @​dependabot (#310)
• Update Dependabot config to group non-breaking changes @​JamesMGreene (#307)

---

See details of all code changes since previous release.

⚠️ For use with products other than GitHub.com, such as GitHub Enterprise Server, please consult the compatibility table.

v4.0.3

Changelog

... (truncated)

Commits

• cd2ce8f Merge pull request #404 from salmanmkc/node24
• bbe2a95 Update Node.js version to 24.x
• 854d7aa Merge pull request #374 from actions/Jcambass-patch-1
• 306bb81 Add workflow file for publishing releases to immutable action package
• b742728 Merge pull request #360 from actions/dependabot/npm_and_yarn/npm_and_yarn-513...
• 7273294 Bump braces in the npm_and_yarn group across 1 directory
• 963791f Merge pull request #361 from actions/dependabot-friendly
• 51bb29d Make the rebuild dist workflow safer for Dependabot
• 89f3d10 Merge pull request #358 from actions/dependabot/npm_and_yarn/non-breaking-cha...
• bce7355 Merge branch 'main' into dependabot/npm_and_yarn/non-breaking-changes-99c12deb21
• Additional commits viewable in compare view

Updates actions/setup-node from 6 to 7

Release notes

Sourced from actions/setup-node's releases.

v7.0.0

What's Changed

Enhancements:

• Add cache-primary-key and cache-matched-key as outputs by @​gowridurgad in actions/setup-node#1577
• Migrate to ESM and upgrade dependencies by @​gowridurgad in actions/setup-node#1574

Bug fixes:

• Remove dummy NODE_AUTH_TOKEN export by @​gowridurgad in actions/setup-node#1558
• Only use mirrorToken in getManifest if it's provided by @​deiga in actions/setup-node#1548

Documentation updates:

• Add documentation for publishing to npm with Trusted Publisher (OIDC) by @​chiranjib-swain in actions/setup-node#1536
• docs: Update restore-only cache documentation by @​priya-kinthali in actions/setup-node#1550
• docs: Update caching recommendations to mitigate cache poisoning risks by @​chiranjib-swain in actions/setup-node#1567

Dependency update:

• Upgrade @​actions/cache to 5.1.0, log cache write denied by @​jasongin in actions/setup-node#1569

New Contributors

• @​chiranjib-swain made their first contribution in actions/setup-node#1536
• @​deiga made their first contribution in actions/setup-node#1548
• @​jasongin made their first contribution in actions/setup-node#1569

Full Changelog: actions/setup-node@v6...v7.0.0

v6.5.0

What's Changed

• Update @​actions/cache to 5.1.0 and add security overrides for undici and fast-xml-parser by @​HarithaVattikuti in actions/setup-node#1579

Full Changelog: actions/setup-node@v6.4.0...v6.5.0

v6.4.0

What's Changed

Dependency updates:

• Upgrade @​actions dependencies by @​Copilot in actions/setup-node#1525
• Update Node.js versions in versions.yml and bump package to v6.4.0 by @​priya-kinthali in actions/setup-node#1533

New Contributors

• @​Copilot made their first contribution in actions/setup-node#1525

Full Changelog: actions/setup-node@v6...v6.4.0

v6.3.0

What's Changed

Enhancements:

• Support parsing devEngines field by @​susnux in actions/setup-node#1283

... (truncated)

Commits

• 8207627 Migrate to ESM and upgrade dependencies (#1574)
• 04be95c Add cache-primary-key and cache-matched-key as outputs (#1577)
• 7c2c68d docs: Update caching recommendations to mitigate cache poisoning risks (#1567)
• 6a61c03 Merge pull request #1569 from jasongin/update-actions-cache-5.1.0
• 30eb73b Resolve high-severity audit issues
• 4e1a87a Update dist
• 360237f Strict equality
• 4f8aac5 Bump @​actions/cache to 5.1.0, log cache write denied
• f4a67bb Only use mirrorToken in getManifest if it's provided (#1548)
• 0355742 Remove dummy NODE_AUTH_TOKEN export (#1558)
• Additional commits viewable in compare view

Updates millionco/react-doctor from 2.2.2 to 2.2.8

Commits

• 01820bb fix(action): upgrade actions/cache to v6.1.0 for Node.js 24 support (#1417)
• 9155bc0 feat(cli): add experimental interactive Ink TUI (#979)
• 76263ec Add direct Three.js and WebGL diagnostics (#1424)
• 3d7ea66 perf: speed up React Doctor scans (#1423)
• 84b9990 chore: version packages (#1420)
...

Description has been truncated