5.Configuration

Global package variables

Table 5.1 Global package variables

Name	Type	Description
NO_OF_SLAVES	integer	specifies no of slaves connected to the APB interface
APB_transfer_char_s	struct	Structure to hold the packet data.
APB_transfer_cfg_s	struct	Structure to hold the configuration data.
apb_fsm_state_e	enum	Represents the type of state IDLE SETUP
ACCESS
slave_no_e	enum	Used to select the one slave at a time by one hot encoding SLAVE_0 = 16'b0000_0000_0000_0001 SLAVE_1 = 16'b0000_0000_0000_0010 SLAVE_2 = 16'b0000_0000_0000_0100 SLAVE_3 = 16'b0000_0000_0000_1000 SLAVE_4 = 16'b0000_0000_0001_000 SLAVE_5 = 16'b0000_0000_0010_0000
endian_e	enum	LITTLE_ENDIAN=1’b0 : lsb bit will store in first address location BIG_ENDIAN = 1’b1 : msb bit will store in first address location
tx_type_e	enum	WRITE=1’b1 : write transfer happen READ=1’b0 : read transfer happen
protectiontype_e	enum	Used to represent the protection type for transaction NORMAL_SECURE_DATA = 3'b000 NORMAL_SECURE_INSTRUCTION = 3'b001 = 3'b010 NORMAL_NONSECURE_INSTRUCTION = 3'b011
PRIVILEGED_SECURE_DATA = 3'b100 PRIVILEGED_SECURE_INSTRUCTION = 3'b101
slave_error_e	enum	Represents slave error signal NO_ERROR=1’b0;ERROR=1’b1;