iplboot v0.3.1_test

Test build with added IDE-EXI v2 Front Slot support built on top of webhdx's modified iplboot fork with M.2 Loader Support.

Very Derp and dirty way implemented there's way better ways to do it I just didn't bother.

iplboot-IDE_EXI_M2.zip = iplboot.dol standalone

NeoPicoBoot_PicoW_v0.3.1.zip = NeoPicoboot.uf2 for the NeoPixel RGB Picoboot fork by paulmreese.
https://github.com/paulmreese/NeoPicoBoot

picoboot_PicoZero_v0.3.1.zip = picoboot.uf2 for RP2040-Zero boards.
https://github.com/fengye/PicoBoot

picoboot_v0.3.1.zip = picoboot.uf2 for original RP2040 Pico boards.
https://github.com/webhdx/PicoBoot

gekkoboot r9.4

Updated to r9.4 from mainstream

• added MMCE support for FlipperMCE/GCMCE devices (@bbsan2k)

gekkoboot.dol = standalone dol reboots to ipl gc menu when no device is detected.

picoloader_gekkoboot9.4.uf2 = picoloader payload to update or install gekkoboot on picoloader.

gekkobootr9.4.zip = memcard.gci, qoob, viper, picobootv0.4+ payload, swiss igr apploader.

gekkoboot r9.3

Updated to gekkoboot r9.3 with support for PicoLoader, do not use the gekkoboot_picoloader.uf2 file for picoboot it is not compatible.

Supports Loading from M.2 Loader, IDE-EXI v2 in Slots A and B, and SD2SP1

• gekkoboot.dol : This is the standalone gekkoboot.dol

• gekkoboot_IPL_NO_SD.dol: reboots to GC Menu if no ipl.dol file is detected on SD card adapters.

• gekkoboot_picloader.uf2 : This is the gekkoboot payload for picoloader that can be used after updating firmware on picoloader or switching from a different homebrew payload.

iplboot v0.3.3_test

Test build with added IDE-EXI v2 Front Slot support built on top of webhdx's modified iplboot fork with M.2 Loader Support.

Changes:

• using slightly modified IDE-EXI driver from Swiss instead of the derp implementation to be more tidy.
• updated to the new libogc2 changes, now possible to use and picoboot from SD cards in SP1 via DIY SD2SP1 adapters.

iplboot-IDE_EXI_M2_SD2SP1.zip = iplboot.dol standalone

NeoPicoBoot_Drive_PicoW_v0.3.3_SD2SP1.zip = NeoPicoboot.uf2 for the NeoPixel RGB Picoboot with DVD Drive Delay, fork by paulmreese.

NeoPicoBoot__NoDrive_PicoW_v0.3.3_SD2SP1.zip = NeoPicoboot.uf2 for the NeoPixel RGB Picoboot Without DVD Drive Delay, fork by paulmreese.
https://github.com/paulmreese/NeoPicoBoot

picoboot_PicoZero_v0.3.3_SD2SP1.zip = picoboot.uf2 for RP2040-Zero boards.
https://github.com/fengye/PicoBoot

picoboot_v0.3.3_SD2SP1.zip = picoboot.uf2 for original RP2040 Pico boards.
https://github.com/webhdx/PicoBoot