TangNano-1K-examples

TangNano-1K is the new ting FPGA board of GW1NZ-1 FPGA.

Orignal TangNano is based on GW1N-1 FPGA, refer to: https://github.com/sipeed/Tang-Nano-examples

TangNano-1K have independent 27M oscillator for FPGA, and remove the psram chip(but keep the pad), use BL702 for programmer FPGA, refer to https://github.com/sipeed/RV-Debugger-BL702

Examples

1. RGB led

Blink board led.

Visit example_led/led_pjt to see this project. Burn the led_pjt.fs into Tang Nano 1K to check your projuct.

Tang Nano 1K Schematic

2. RGB 5_inch LCD

Drive the 5_inch RGB 40pin lcd screen.

Visit example_lcd/lcd_pjt to see this project. Burn the lcd_pjt.fs into Tang Nano 1K to check your projuct.

Screen datasheet

3. RGB 4.3_inch LCD

Drive the 4.3_inch RGB 40pin lcd screen.

Visit example_lcd/lcd_480_272 to see this project. Burn the lcd_43.fs into Tang Nano 1K to check your projuct.

Screen datasheet

4. RGB 7.0_inch LCD

This screen using the same driver as 5_inch LCD.

Questions

Error code:RP2017

When you meet error code PR2017, just enable corresponding IO as regular IO.

Click Project in top menu bar and choose Configuration, then enable the corresponding Dual Purpose Pin to deal with this error.