HERE IS A ZIP FILE OF THE CODE USED TO READ AND WRITE THE FLASH MEMORY FOR STM32-g473 BUT I TRIED TO DO WITH g0,g4 BOARD THE CODE WORKED FOR EVERY THING

Drivers for on-board sensors and modules.

Software based Wear Leveling subsystem for W25Q64FV Serial Flash Memory using the 256-byte memory of three Security Registers.

Device driver for TH58CYG3S0HRAIJ Flash memory

IS25LP128 128Mb SPI Flash Module Arduino Library

Simple program written in Assembly for addressing hardware W25Q16JV flash memory using SPI protocol

This project was done during course ELEC 291 at UBC (University of British Columbia) in February 2022.

Plugin for Saleae Logic Analyzer to decode and export raw layer-1 NAND Flash data that follows the Open NAND Flash Interface specification.

A CMSIS based Library for Reading, Writing and Erasing the Winbond W256Q64FV SPI Flash Memory using an STM32F401 Nucleo Development Board.

Library for EN25Q80B

Algorithm and Computer Architecture

Research the usability of the unused blocks notification operation against flash storage controllers over the USB interface.

Communication library for Microchip SPI 1Mbit EEPROM with Microsoft .NET Micro Framework

Simple program written in Assembly for software addressing, not hardware, to SPI protocol W25Q16JV flash memory

Script de backup em memórias flash.

Simple program written in ANSI C for hardware addressing W25Q16JV flash memory using SPI protocol

Library for S25FL512S.

Tool for monitoring a custom extended version of ESP-IDF wear leveling. Result of my Bachelor's thesis on FIT BUT.

The SPI Flash Extension library to merges a collection of flash memories as a memory bank in MCU

SPI flash memory utility for the ft232h USB to SPI adapter