A final project for FPGA_SOC course
-
Updated
Jul 19, 2021 - HTML
A final project for FPGA_SOC course
custom lambda-function like circuits for FPGA is the future
A physical fishing game primarily through frontend web-development and python.
Codes to control a motor, get environment information and send it to a webserver (firebase). For this project I'm using ESP32 in IDF framework.
firmware for a reflow controller
Sharif University of Technology - Spring 2019 - Digital System Design Course Project
This is a RP2040 based dev board, this with the intention to create my own boards and learn about the process of hardware design and PCB assembly and manufacture process.
Transmitter and Receiver FPGAs connected using the UART Protocol to execute arithmetic operations and display the inputs on the transmitter's 7 Segment Display as well as the result on the Receiver's 7 Segments Display.
SDRAM Controller, written by SystemVerilogHDL, supporting passing parameters including CAS Latency(CL), burst mode enable and burst length, using writing and reading control signal as request/response handshake bus protocol
DIY ESP-32 Based sprinkler Controller
Currently in development, this system will test static stability of powered and manual wheelchair using load cells.
Raspberry Pi powered High Altitude Weather Balloon
COEX hardware, licensed under CC BY-NC-SA 4.0
CIA-IDE hard disk drive interface for C64/128 for IDE drivers with GEOS and IDE64 drivers
FOC_ESC hardware design repository
Add a description, image, and links to the hardware-designs topic page so that developers can more easily learn about it.
To associate your repository with the hardware-designs topic, visit your repo's landing page and select "manage topics."