100kHz to 6GHz 2 port USB based VNA

machine learning algorithm

Open the Tesla charge door with an Arduino and an ASK STX882 transmitter

An implementation of a ANT driver for Arduino, Mbed and ESP-IDF

System to capture digital signaldata and transfer them to another system

Examples for Canopus_RAK3172 board

Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably works with a lot more.

🔑This is a small project about an RF module for an Arduino. This module can transmit at 433 MHz, which can be used to jam or disable a car key. ❗This project is for educational and informational purposes only. In some countries, it is illegal to block a signal. I assume no liability for any damage.❗

RF Remote Control

Desenvolvimento e produção de um picossatélite para realizações de medições atmosféricas e envio de telemetria por RF.

RumbleFighter GameGuard bypass written with C++ 11 using win32

Arduino lib to operate 433/315Mhz devices like power outlet sockets and receive PIR, door, window sensor signals

SoapySDR plugin for remotely accessing SpyServer devices

Dual channel Arduino Nano milliwatt power meter for HF/VHF/UHF/SHF bands

A Simple ESP12 & AD9851 based RF Jammer which can be controlled using MQTT protocol

This is a simple CW beacon project based on Arduino and Si5351 clock generator. It transmits a predefined message as morse code on a fixed frequency.

40msps (20mhz) 10-bit USB-3.0 RF sampler

SIGNALduino direclty on ESP8266

Firmware and hardware for a custom Nexa 433 MHz controller using ATtiny85 and STX882 RF module.

A low power RF data link between two ATmega328's based Arduino units , Sensor data is transferred Via a 433 Mhz transmitter. and then displayed on an OLED CH1115.