A system that uses ESP-NOW, LoRa, and other protocols to transport sensor data in remote areas without relying on WiFi.

rete monitoraggio ambientale partecipativo documentation at https://doc.rmap.cc

Multi-sensor intelligent environmental Monitor

The FP-SNS-DATALOG2 function pack represents an evolution of FP-SNS-DATALOG1 and provides a comprehensive solution for saving data from any combination of sensors and microphones configured up to the maximum sampling rate. Please check st.com where a more recent version of the software might be available.

An Electric Vehicle Charging Protocol Implementation with a Robotic Car emulating a Physical Model Car.

Very lightweight daemon to publish figures to a MQTT broker (1wire data as temperatures, ISP real time consumption, UPS figures, meteo forecast, ...), check subscribted topics and alerts if out of range or missing. Custom decision scripts can be created in Lua.

The FP-SNS-DATALOG1 function pack provides a comprehensive solution to save data from any combination of sensors and microphones configured up to the maximum sampling rate available on STWIN and SensorTile.box

Microcontroller HC-SR04 sensor program for distance measurement with audio output from sd card, using algorithm to combine *.wav files to build output sound and dma to streamline data to i2s interface.

A Contiki program for Sky Tmote where each node broadcasts a message every time its button is pressed

M5Stack Tough sensor hub publishing sensor data from BME680, SFA30, MLX90614 via MQTT, BLE, LoRaWAN

Firmware for the BlueTile that streams sensor values over Bluetooth + Companion Python App for Linux to read them.

This repo will illustrate material pertaining to the course embedded systems: an intelligent system with special-purpose computation capabilities. By addressing the internal organization of micro-controller systems used in a variety of engineered systems.

BMP280 pressure and temperature sensor driver using STM32 HAL and data plotting script in Python

Outputs current CPU temperature and frequency for OSX.

A QNX process for fetching data from sensors over I2C.

The FP-IND-DATALOGMC function pack for STEVAL-STWINBX1 and EVLSPIN32G4-ACT is a powerful integrated toolkit for the next generation of smart actuators. It is derived from FP-SNS-DATALOG2 function pack and it allows the collection of heterogeneous data. Please check st.com where a more recent version of the software might be available.

A Contiki program for Sky Tmote where each node broadcasts and receives its measurements to its neighbors and presents current, min, max and average readings on the browser

Code snippets and BME680 sensor mount design to enable routine sensor data collection for spray drying process characterization (Buchi B290).

Project regarding networked embedded systems. Development of an alarm system interconnecting Mbed nodes with a Controller Area Network (CAN).

An interface with sensor readings(such as temperature, cough, etc.) to detect Covid-19. [created with C programming language]