This repository contains all my practice codes of TM4C123GXL coded in CCS7. The Texas Instruments Tiva C LaunchPad board TM4C123G is used for the code. The TM4C123GXL Launchpad has the TM4C123GH6PM microcontroller which is based on the ARM Cortex-M4F microcontroller architecture and clocked at 80 MHz (with 100 DMIPS)

ARM Cortex-M3/M4 drivers and projects made on TI Tiva-C and STM32F103.

A simple template to write, compile and flash code for the TM4C123G Launchpad board on a Linux system.

Minimal TCP/IP stack for non OS based micrcontroller enviornment.

Tiva C: UART, I2C, SPI, SSI

A development environment for Texas Instruments Tiva C Series microcontrollers using Docker and Visual Studio Code

IMU Sensor integration with Tiva Launchpad

Controlling LEDs with Tiva-C by a GUI that send commands to the MCU using UART

GPIO management library for Tiva-C Series TM4C123G

This repository contains all my practice codes of TM4C123GXL coded in IAR Workbench. The Texas Instruments Tiva C LaunchPad board TM4C123G is used for the code. The TM4C123GXL Launchpad has the TM4C123GH6PM microcontroller which is based on the ARM Cortex-M4F microcontroller architecture and clocked at 80 MHz (with 100 DMIPS).

DHT11 Bare-metal driver for TM4C123GH6PM

AUTOSAR Port driver based on Tm4c123gh6pm

This is a driver for 128x32 oled screens that use SSD1306 and communicate through the I2C protocol.

The goal of this project is design a system capable of measuring resistance, inductance (and ESR), and capacitance

RTOS solutions for an M4F controller that implements a cooperative and preemptive RTOS solution with support for semaphores, yielding, sleep, priority scheduling, priority inheritance, and a shell interface.

EK-TM4C123GXL project set up with CMake/gcc/vscode

TM4C123 controlled ADAU1701 based headphone amplifier

UIUC's implementation of the Protected Automotive Remote Entry Device (PARED) for MITRE eCTF 2023

TivaC (TM4C1294NCPDT and TM4C123GH6PM) Template Project (CMakefile)