Bambu Lab Setup

Bambu Lab Setup

Requirements

• Bambu Lab printer on the same reachable network as Printbuddy.
• LAN access / Developer Mode enabled where required.
• Printer IP address or hostname.
• Access code.
• Serial number when required by the local connection workflow.

Enable local access

Depending on printer model and firmware, local access may be called LAN mode, LAN-only mode, or Developer Mode.

Use the printer screen or Bambu Studio device settings to find:

• Access code.
• Printer serial/device ID.
• Local IP address.

Add the printer

In Printbuddy:

1. Add printer.
2. Choose Bambu Lab.
3. Enter name, IP/hostname, access code, serial number, and model.
4. Save and verify the dashboard card.

Notes

• Bambu-specific AMS, calibration, FTP, and local MQTT behavior belongs to the Bambu provider only.
• If the printer connects but status remains unknown, double-check the serial number casing and any LAN access setting.
• If camera access fails, test the printer network path first, then configure an external camera URL if needed.