Skip to content

ios

Jump to bottom
Zeta Square edited this page Jun 27, 2026 · 1 revision

Configure iOS device

Configure DadsDNS for ANFS Families

Note: This configuration only applies to the Wi-Fi network you are currently connected to. You will need to repeat these steps for each new Wi-Fi network. This method does not work for cellular connections.

Take note of any DNS addresses you might have set up, and save them in a safe place in case you need to use them later.

  1. Go to Settings > Wi-Fi.
  2. Select the 'i' icon next to the Wi-Fi network you are connected to.
  3. Scroll down and select Configure DNS.
  4. Change the configuration from Automatic to Manual.
  5. Select Add Server.
  6. Depending on what you want to configure, choose one of the following DNS addresses for IPv4:

For full protection

family.dadsdns.site
1.1.1.3
1.0.0.3

For malware only

1.1.1.2
1.0.0.2
  1. Depending on what you want to configure, choose one of the following Cloudflare DNS addresses for IPv6:

Note - DadsDNS is not IPv6 enabled yet. The following information is for Cloudflare Family DNS resolver.

Block malware with 1.1.1.1 for Families

2606:4700:4700::11122606:4700:4700::1002

Block malware and adult content with 1.1.1.1 for Families

2606:4700:4700::11132606:4700:4700::1003
  1. Select Save.

Note

Setting up a static IP address to configure a DNS server may prevent you from connecting to some public Wi-Fi networks that use captive portals — these are the web pages some wireless networks employ to let users log in and use their services.

If you are experiencing connectivity issues related to captive portals:

  1. Remove the static IP addresses from the device.
  2. Connect to the Wi-Fi network.
  3. Once the connection has been established, re-add the static IP addresses.

Clone this wiki locally